Datasets:

librarian-bots

/

arxiv-metadata-snapshot

like 3

Follow

Librarian Bots 62

0912.1312

Tobias Kuna

Yuri G. Kondratiev and Tobias Kuna and Maria Jo\~ao Oliveira and Jos\'e Lu\'is da Silva and Ludwig Streit

Hydrodynamic limits for the free Kawasaki dynamics of continuous particle systems

In: E. Carlen, P. Goncalves, A. J. Soares (eds) From Particle Systems to Partial Differential Equations. PSPDE 2022. Springer Proceedings in Mathematics & Statistics, vol 465

10.1007/978-3-031-65195-3_7

math.PR math-ph math.MP

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

An infinite particle system of independent jumping particles in infinite volume is considered. Their construction is recalled,further properties are derived, the relation with hierarchical equations, Poissonian analysis, and second quantization are discussed. The hydrodynamic limit for a general initial distribution satisfying a mixing condition is derived. The long time asymptotic is computed under an extra assumption. The relation with constructions based on infinite volume limits is discussed.

1007.2538

Vladan Pankovic

Vladan Pankovic

On the quantum mechanic foundation and quantum-classical phase transition with spontaneous superposition breaking

23 pages, 4 figures

PH-D\102-2024

quant-ph

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this work we consider basic principles and problems of the standard quantum mechanical formalism. Especially we consider final measurement or detection procedure (collapse) as a quantum-classical continuous phase transition with spontaneous (non-dynamical) unitary symmetry (superposition) breaking (effective hiding). Practically, collapse as an effective (non-absolute) phenomena can be considered as an especial case of the general formalism of spontaneous symmetry breaking (with applications in many different domains of the physics, e.g. in elasticity of rigid bodies, quantum theory of ferromagnetism, quantum theory of electro-weak interactions as well as in chaotic inflation cosmology). General theory of the detection procedure (collapse) we consider in real experiment of single photon interference at beam splitter with final detection of the photon coordinate by usual photographic plate.

1303.3787

Christophe Ringeval

Jerome Martin, Christophe Ringeval and Vincent Vennin

Encyclopaedia Inflationaris

781 pages, 513 figures, uses jcappub. Preface added, matches published version of the Opiparous Edition

Phys.Dark Univ. 5-6 (2014) 75-235; Phys.Dark Univ. 46 (2024) 101653

10.1016/j.dark.2014.01.003 10.1016/j.dark.2024.101653

astro-ph.CO gr-qc hep-ph hep-th

http://creativecommons.org/licenses/by-nc-sa/4.0/

The current flow of high accuracy astrophysical data, among which are the Cosmic Microwave Background (CMB) measurements by the Planck satellite, offers an unprecedented opportunity to constrain the inflationary theory. This is however a challenging project given the size of the inflationary landscape which contains hundreds of different scenarios. Given that there is currently no observational evidence for primordial non-Gaussianities, isocurvature perturbations or any other non-minimal extension of the inflationary paradigm, a reasonable approach is to consider the simplest models first, namely the slow-roll single field models with minimal kinetic terms. This still leaves us with a very populated landscape, the exploration of which requires new and efficient strategies. It has been customary to tackle this problem by means of approximate model independent methods while a more ambitious alternative is to study the inflationary scenarios one by one. We have developed the publicly available runtime library ASPIC to implement this last approach. The ASPIC code provides all routines needed to quickly derive reheating-consistent observable predictions within this class of scenarios. ASPIC has been designed as an evolutive code which presently supports 118 different models. In this paper, for each of the ASPIC models, we present and collect new results in a systematic manner, thereby constituting the first Encyclopaedia Inflationaris.

1304.6785

Shinichi Kotani

Shinichi Kotani

On limit set of KdV flow: An extension of Remling theorem

incomplete statement in Theorem

math.SP

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

C. Remling obtained a theorem on limit set of the shift operation on a space of functions on R when the associated 1-D half line Schr\"odinger operators have absolutely continuous component in their spectrum. The purpose of the paper is to define a KdV flow on a certain class of functions containing algebro-geometric functions and to extend this result to the KdV flow.

1308.0100

Noriaki Ikeda

Noriaki Ikeda and Xiaomeng Xu

Current Algebras from DG Symplectic Pairs in Supergeometry

35 pages

MISC-2013-07

math-ph hep-th math.MP math.SG

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We propose a new unified formulation of the current algebra theory in terms of supergeometry. We take a QP-structure, i.e. a differential graded symplectic structure, on a graded cotangent bundle as a fundamental framework. A Poisson bracket in a current algebra is constructed by the so called derived bracket of the graded Poisson structure induced from the above symplectic structure. By taking a canonical transformation on a QP-manifold, correct anomalous terms in physical theories are derived. A large class of current algebras with and without anomalous terms are constructed from this structure. Moreover, a new class of current algebras related higher structures are obtained systematically.

1505.01168

Roberto Vega-Morales

Yi Chen, Daniel Stolarski, Roberto Vega-Morales

Golden Probe of the Top Yukawa

references and footnote added, typos fixed

Phys. Rev. D 92, 053003 (2015)

10.1103/PhysRevD.92.053003

CERN-PH-TH-2015-106, LPT-Orsay-15-32

hep-ph hep-ex

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We perform a preliminary study of the ability of the Higgs decay to four leptons to shed light on the top quark Yukawa couplings. In particular we examine whether the $h\to 4\ell$ `golden channel' is sensitive to the $CP$ properties of the top quark couplings to the Higgs boson. We show that kinematic distributions are sensitive to interference of the next-to-leading order electroweak corrections with the tree level $ZZ$ contribution. This translates into a sensitivity to the top quark Yukawa couplings such that meaningful constraints on their $CP$ properties can begin to be obtained once $\sim 300$ fb$^{-1}$ of data has been collected at $\sim 14$ TeV, with significant improvements at higher luminosity or with a higher energy hadron collider. This makes the $h\to4\ell$ channel a useful probe of the top quark Yukawa couplings that is qualitatively different from already established searches in $h\to V\gamma$ two body decays, $tth$, and $gg\to h$. We also briefly discuss other potential possibilities for probing the top Yukawa $CP$ properties in $h\to2\ell\gamma$ and $\ell^+\ell^-\to h Z, h\gamma$.

1812.03166

Bruno Werneck Mintz

Bruno W. Mintz, Leticia F. Palhares, Giovani Peruzzo, Silvio P. Sorella

Infrared massive gluon propagator from a BRST-invariant Gribov horizon in a family of covariant gauges

9 pages

Phys. Rev. D 99, 034002 (2019)

10.1103/PhysRevD.99.034002

hep-th hep-ph

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

A distinctive feature observed in lattice simulations of confining nonabelian gauge theories, such as Quantum Chromodynamics, is the presence of a dynamical mass for the gauge field in the low energy regime of the theory. In the Gribov-Zwanziger framework in the Landau gauge, such mass is a consequence of the generation of the dimension two condensates $\langle A_\mu^aA_\mu^a\rangle$ and $\langle \bar\varphi_\mu^{ab}\varphi_\mu^{ab}-\bar\omega_\mu^{ab}\omega_\mu^{ab}\rangle$, where $A$ is the gluon field and the fields $\bar\varphi$, $\varphi$, $\bar\omega$, and $\omega$ are Zwanziger's auxiliary fields. In this work, we show that, in the recently developed BRST-invariant version of the Refined Gribov-Zwanziger theory, these condensates can be introduced in a BRST-invariant way for a family of $R_\xi$ gauges. Their values are explicitly computed to first order and turn out to be independent of the gauge parameters contained in the gauge-fixing condition, as expected from the BRST invariance of the formulation. This fact supports the possibility of a gauge-parameter independent nonzero infrared gluon mass, whose value is the same as the one in the Landau gauge.

1812.05741

Lachlan Astfalck

Lachlan Astfalck, Deborshee Sen, Sayan Patra, Edward Cripps and David Dunson

Posterior Projection for Inference in Constrained Spaces

Submitted to the Journal of Machine Learning Research

stat.ME

http://creativecommons.org/licenses/by-sa/4.0/

Estimation of parameters that obey specific constraints is crucial in statistics and machine learning; for example, when parameters are required to satisfy boundedness, monotonicity, or linear inequalities. Traditional approaches impose these constraints via constraint-specific transformations or by truncating the posterior distribution. Such methods often result in computational challenges, limited flexibility, and a lack of generality. We propose a generalized framework for constrained Bayesian inference by projecting the unconstrained posterior distribution into the space of the parameter constraints, providing a computationally efficient and easily implementable solution for a large class of problems. We rigorously establish the theoretical foundations of the projected posterior distribution, as well as providing asymptotic results for posterior consistency, posterior contraction, and optimal coverage properties. Our methodology is validated through both theoretical arguments and practical applications, including bounded-monotonic regression and emulation of a computer model with directional outputs.

1901.00050

Michael Overton

Adrian S. Lewis and Michael L. Overton

Partial smoothness of the numerical radius at matrices whose fields of values are disks

math.NA cs.NA math.OC

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Solutions to optimization problems involving the numerical radius often belong to a special class: the set of matrices having field of values a disk centered at the origin. After illustrating this phenomenon with some examples, we illuminate it by studying matrices around which this set of "disk matrices" is a manifold with respect to which the numerical radius is partly smooth. We then apply our results to matrices whose nonzeros consist of a single superdiagonal, such as Jordan blocks and the Crabb matrix related to a well-known conjecture of Crouzeix. Finally, we consider arbitrary complex three-by-three matrices; even in this case, the details are surprisingly intricate. One of our results is that in this real vector space with dimension 18, the set of disk matrices is a semi-algebraic manifold with dimension 12.

1901.00079

Daozhi Han

Gang Chen, Daozhi Han, John Singler, Yangwen Zhang

On the superconvergence of a hydridizable discontinuous Galerkin method for the Cahn-Hilliard equation

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We propose a hydridizable discontinuous Galerkin (HDG) method for solving the Cahn-Hilliard equation. The temporal discretization can be based on either the backward Euler method or the convex-splitting method. We show that the fully discrete scheme admits a unique solution, and we establish optimal convergence rates for all variables in the $L^2$ norm for arbitrary polynomial orders. In terms of the globally coupled degrees of freedom, the scalar variables are superconvergent. Another theoretical contribution of this work is a novel HDG Sobolev inequality that is useful for HDG error analysis of nonlinear problems. Numerical results are reported to confirm the theoretical convergence rates.

1901.00107

Wensheng Tang

Wensheng Tang and Jingjing Zhang

Symmetric integrators based on continuous-stage Runge-Kutta-Nystrom methods for reversible systems

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we study symmetric integrators for solving second-order ordinary differential equations on the basis of the notion of continuous-stage Runge-Kutta-Nystrom methods. The construction of such methods heavily relies on the Legendre expansion technique in conjunction with the symmetric conditions and simplifying assumptions for order conditions. New families of symmetric integrators as illustrative examples are presented. For comparing the numerical behaviors of the presented methods, some numerical experiments are also reported.

1901.00112

Junxian Wang

Junxian Wang, Eric Chung, Hyea Hyun Kim

A two-level overlapping Schwarz method with energy-minimizing multiscale coarse basis functions

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

A two-level overlapping Schwarz method is developed for second order elliptic problems with highly oscillatory and high contrast coefficients, for which it is known that the standard coarse problem fails to give a robust preconditioner. In this paper, we develop energy minimizing multiscale finite element functions to form a more robust coarse problem. First, a local spectral problem is solved in each non-overlapping coarse subdomain, and dominant eigenfunctions are selected as auxiliary functions, which are crucial for the high contrast case. The required multiscale basis functions are then obtained by minimizing an energy subject to some orthogonality conditions with respect to the auxiliary functions. Due to an exponential decay property, the minimization problem is solved locally on oversampling subdomains, that are unions of a few coarse subdomains. The coarse basis functions are therefore local and can be computed efficiently. The resulting preconditioner is shown to be robust with respect to the contrast in the coefficients as well as the overlapping width in the subdomain partition. Numerical results are presented to validate the theory and show the performance.

1901.00201

Petr N. Vabishchevich

Raimondas Ciegis and Petr Vabishchevich

High order numerical schemes for solving fractional powers of elliptic operators

25 pages, 10 figures

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In many recent applications when new materials and technologies are developed it is important to describe and simulate new nonlinear and nonlocal diffusion transport processes. A general class of such models deals with nonlocal fractional power elliptic operators. In order to solve these problems numerically it is proposed (Petr N. Vabishchevich, Journal of Computational Physics. 2015, Vol. 282, No.1, pp.289--302) to consider equivalent local nonstationary initial value pseudo-parabolic problems. Previously such problems were solved by using the standard implicit backward and symmetrical Euler methods. In this paper we use the one-parameter family of three-level finite difference schemes for solving the initial value problem for the first order nonstationary pseudo-parabolic problem. The fourth-order approximation scheme is developed by selecting the optimal value of the weight parameter. The results of the theoretical analysis are supplemented by results of extensive computational experiments.

1901.00229

Graciela Del Socorro Herrera Zamarr\'on

Ismael Herrera-Revilla, Iv\'an Contreras and Graciela S. Herrera (Instituto de Geof\'isica, Universidad Nacional Aut\'onoma de M\'exico (UNAM), Mexico City, Mexico)

The Divide-and-Conquer Framework: A Suitable Setting for the DDM of the Future

14 pages without figures

cs.CE cs.NA math.NA physics.comp-ph

http://creativecommons.org/licenses/by-nc-sa/4.0/

This paper was prompted by numerical experiments we performed, in which algorithms already available in the literature (DVS-BDDM) yielded accelerations (or speedups) many times larger (more than seventy in some examples already treated, but probably often much larger) than the number of processors used. Based on these outstanding results, here it is shown that believing in the standard ideal speedup, which is taken to be equal to the number of processors, has limited much the performance goal sought by research on domain decomposition methods (DDM) and has hindered much its development, thus far. Hence, an improved theory in which the speedup goal is based on the Divide and Conquer algorithmic paradigm, frequently considered as the leitmotiv of domain decomposition methods, is proposed as a suitable setting for the DDM of the future.

1901.00260

Hassan Safouhi

Jordan Lovrod and Hassan Safouhi

Double Exponential Transformation For Computing Three-Centre Nuclear Attraction Integrals

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Three-centre nuclear attraction integrals, which arise in density functional and \textit{ab initio} calculations, are one of the most time-consuming computations involved in molecular electronic structure calculations. Even for relatively small systems, millions of these laborious calculations need to be executed. Highly efficient and accurate methods for evaluating molecular integrals are therefore all the more vital in order to perform the calculations necessary for large systems. When using a basis set of $B$ functions, an analytical expression for the three-centre nuclear attraction integrals can be derived via the Fourier transform method. However, due to the presence of the highly oscillatory semi-infinite spherical Bessel integral, the analytical expression still remains problematic. By applying the $S$ transformation, the spherical Bessel integral can be converted into a much more favorable sine integral. In the present work, we then apply two types of double exponential transformations to the resulting sine integral, which leads to a highly efficient and accurate quadrature formulae. This method facilitates the approximation of the molecular integrals to a high predetermined accuracy, while still keeping the calculation times low. The fast convergence properties analyzed in the numerical section illustrate the advantages of the method.

1901.00343

Dingjiong Ma

Jingrun Chen, Dingjiong Ma, Zhiwen Zhang

A multiscale finite element method for the Schr\"{o}dinger equation with multiscale potentials

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In recent years, an increasing attention has been paid to quantum heterostructures with tailored functionalities, such as heterojunctions and quantum matematerials, in which quantum dynamics of electrons can be described by the Schr\"{o}dinger equation with multiscale potentials. The model, however, cannot be solved by asymptoics-based approaches where an additive form of different scales in the potential term is required to construct the prescribed approximate solutions. In this paper, we propose a multiscale finite element method to solve this problem in the semiclassical regime. The localized multiscale basis are constructed using sparse compression of the Hamiltonian operator, and thus are "blind" to the specific form of the potential term. After an one-shot eigendecomposition, we solve the resulting system of ordinary differential equations explicitly for the time evolution. In our approach, the spatial mesh size is $ H=\mathcal{O}(\epsilon) $ where $\epsilon$ is the semiclassical parameter and the time stepsize $ k$ is independent of $\epsilon$. Numerical examples in one dimension with a periodic potential, a multiplicative two-scale potential, and a layered potential, and in two dimension with an additive two-scale potential and a checkboard potential are tested to demonstrate the robustness and efficiency of the proposed method. Moreover, first-order and second-order rates of convergence are observed in $H^1$ and $L^2$ norms, respectively.

1901.00348

Paul Van den Hof

Harm H.M. Weerts, Jonas Linder, Martin Enqvist and Paul M.J. Van den Hof

Abstractions of linear dynamic networks for input selection in local module identification

17 pages, 7 figures. Paper to appear in Automatica, Vol. 117, July 2020

10.1016/j.automatica.2020.108975

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In abstractions of linear dynamic networks, selected node signals are removed from the network, while keeping the remaining node signals invariant. The topology and link dynamics, or modules, of an abstracted network will generally be changed compared to the original network. Abstractions of dynamic networks can be used to select an appropriate set of node signals that are to be measured, on the basis of which a particular local module can be estimated. A method is introduced for network abstraction that generalizes previously introduced algorithms, as e.g. immersion and the method of indirect inputs. For this abstraction method it is shown under which conditions on the selected signals a particular module will remain invariant. This leads to sets of conditions on selected measured node variables that allow identification of the target module.

1901.00408

Ali Salamati

Teimour Hosseinalizadeh, S. Mahmoud Salamati, S. Ali Salamati, and G. B. Gharehpetian

Improvement of Identification Procedure Using Hybrid Cuckoo Search Algorithm for TurbineGovernor and Excitation System

10 pages, 9 figures, 3 tables, Published in: IEEE Transactions on Energy Conversion

IEEE Trans. on Enrgy Conv, 2018

10.1109/TEC.2018.2868747

eess.SP cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper a new method is introduced in order to modify identification process of a gas power plant using a metaheuristic algorithm named Cuckoo Search (CS). Simulations play a significant role in dynamic analyses of power plants. This paper points out to a practical approach in model selection and parameter estimation of gas power plants. The identification and validation process concentrates on two subsystems: governor-turbine and exciter. Standard models GGOV1 and STB6 are preferred for the dynamical structures of governor-turbine and exciter respectively. Considering definite standard structure, main parameters of dynamical model are pre estimated via system identification methods based on field data. Then obtained parameters are tuned carefully using an iterative Cuckoo algorithm. Models must be validated by results derived via a trial and error series of simulation in comparison to measured test data. The procedure gradually yields in a valid model with precise estimated parameters. Simulation results show accuracy of identified models. Besides, a whiteness analysis has been performed in order to show the authenticity of the proposed method in another way. Despite various detailed models, practical attempts of model selection, identification, and validation in a real gas unit could rarely be found among literature. In this paper, Chabahar power plant in Iran, with total install capacity of 320 MW, is chosen as a benchmark for model validation.

1901.00441

Li-Xin Wang

Li-Xin Wang

Hierarchical Fuzzy Opinion Networks: Top-Down for Social Organizations and Bottom-Up for Election

cs.MA cs.SI cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

A fuzzy opinion is a Gaussian fuzzy set with the center representing the opinion and the standard deviation representing the uncertainty about the opinion, and a fuzzy opinion network is a connection of a number of fuzzy opinions in a structured way. In this paper, we propose: (a) a top-down hierarchical fuzzy opinion network to model how the opinion of a top leader is penetrated into the members in social organizations, and (b) a bottom-up fuzzy opinion network to model how the opinions of a large number of agents are agglomerated layer-by-layer into a consensus or a few opinions in the social processes such as an election. For the top-down hierarchical fuzzy opinion network, we prove that the opinions of all the agents converge to the leaders opinion, but the uncertainties of the agents in different groups are generally converging to different values. We demonstrate that the speed of convergence is greatly improved by organizing the agents in a hierarchical structure of small groups. For the bottom-up hierarchical fuzzy opinion network, we simulate how a wide spectrum of opinions are negotiating and summarizing with each other in a layer-by-layer fashion in some typical situations.

1901.00486

Mattia Zanella

Lorenzo Pareschi, Giuseppe Toscani, Andrea Tosin, Mattia Zanella

Hydrodynamic models of preference formation in multi-agent societies

30 pages, 15 figures

J. Nonlinear Sci., 29(6):2761-2796, 2019

10.1007/s00332-019-09558-z

physics.soc-ph cs.NA math-ph math.MP math.NA nlin.AO

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we discuss the passage to hydrodynamic equations for kinetic models of opinion formation. The considered kinetic models feature an opinion density depending on an additional microscopic variable, identified with the personal preference. This variable describes an opinion-driven polarisation process, leading finally to a choice among some possible options, as it happens e.g. in referendums or elections. Like in the kinetic theory of rarefied gases, the derivation of hydrodynamic equations is essentially based on the computation of the local equilibrium distribution of the opinions from the underlying kinetic model. Several numerical examples validate the resulting model, shedding light on the crucial role played by the distinction between opinion and preference formation on the choice processes in multi-agent societies.

1901.00602

Yun Feng

Yun Feng, Bing-Chuan Wang

Weights Adaptation Optimization of Heterogeneous Epidemic Spreading Networks: A Constrained Cooperative Coevolution Strategy

cs.NE cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, the dynamic constrained optimization problem of weights adaptation for heterogeneous epidemic spreading networks is investigated. Due to the powerful ability of searching global optimum, evolutionary algorithms are employed as the optimizers. One major difficulty is that the dimension of the problem is increasing exponentially with the network size and most existing evolutionary algorithms cannot achieve satisfiable performance on large-scale optimization problems. To address this issue, a novel constrained cooperative coevolution ($C^3$) strategy, which can separate the original large-scale problem into different subcomponents, is employed to achieve the trade-off between the constraint and objective function.

1901.00618

Zhongjian Wang

Zhongjian Wang, Zhiwen Zhang

A mesh-free method for interface problems using the deep learning approach

10.1016/j.jcp.2019.108963

physics.comp-ph cs.NA math.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we propose a mesh-free method to solve interface problems using the deep learning approach. Two interface problems are considered. The first one is an elliptic PDE with a discontinuous and high-contrast coefficient. While the second one is a linear elasticity equation with discontinuous stress tensor. In both cases, we formulate the PDEs into variational problems, which can be solved via the deep learning approach. To deal with the inhomogeneous boundary conditions, we use a shallow neuron network to approximate the boundary conditions. Instead of using an adaptive mesh refinement method or specially designed basis functions or numerical schemes to compute the PDE solutions, the proposed method has the advantages that it is easy to implement and mesh-free. Finally, we present numerical results to demonstrate the accuracy and efficiency of the proposed method for interface problems.

1901.00635

Yong-Liang Zhao

Yong-Liang Zhao, Pei-Yong Zhu, Xian-Ming Gu, Xi-Le Zhao, Huan-Yan Jian

A preconditioning technique for all-at-once system from the nonlinear tempered fractional diffusion equation

10 tables, 2 figures

Journal of Scientific Computing, 2020

10.1007/s10915-020-01193-1

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

An all-at-once linear system arising from the nonlinear tempered fractional diffusion equation with variable coefficients is studied. Firstly, the nonlinear and linearized implicit schemes are proposed to approximate such the nonlinear equation with continuous/discontinuous coefficients. The stabilities and convergences of the two schemes are proved under several suitable assumptions, and numerical examples show that the convergence orders of these two schemes are $1$ in both time and space. Secondly, a nonlinear all-at-once system is derived based on the nonlinear implicit scheme, which may suitable for parallel computations. Newton's method, whose initial value is obtained by interpolating the solution of the linearized implicit scheme on the coarse space, is chosen to solve such the nonlinear all-at-once system. To accelerate the speed of solving the Jacobian equations appeared in Newton's method, a robust preconditioner is developed and analyzed. Numerical examples are reported to demonstrate the effectiveness of our proposed preconditioner. Meanwhile, they also imply that such the initial guess for Newton's method is more suitable.

1901.00654

Martin Siebenborn

Martin Siebenborn and Julian Wagner

A Multigrid Preconditioner for Tensor Product Spline Smoothing

10.1007/s00180-021-01104-4

math.NA cs.NA math.OC

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Uni- and bivariate data smoothing with spline functions is a well established method in nonparametric regression analysis. The extension to multivariate data is straightforward, but suffers from exponentially increasing memory and computational complexity. Therefore, we consider a matrix-free implementation of a geometric multigrid preconditioned conjugate gradient method for the regularized least squares problem resulting from tensor product B-spline smoothing with multivariate and scattered data. The algorithm requires a moderate amount of memory and is therefore applicable also for high-dimensional data. Moreover, for arbitrary but fixed dimension, we achieve grid independent convergence which is fundamental to achieve algorithmic scalability.

1901.00673

Junyang Jin

Junyang Jin, Ye Yuan and Jorge Goncalves

High Precision Variational Bayesian Inference of Sparse Linear Networks

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Sparse networks can be found in a wide range of applications, such as biological and communication networks. Inference of such networks from data has been receiving considerable attention lately, mainly driven by the need to understand and control internal working mechanisms. However, while most available methods have been successful at predicting many correct links, they also tend to infer many incorrect links. Precision is the ratio between the number of correctly inferred links and all inferred links, and should ideally be close to 100%. For example, 50% precision means that half of inferred links are incorrect, and there is only a 50% chance of picking a correct one. In contrast, this paper develops a method, based on variational Bayesian inference and Gaussian processes, that focuses on inferring links with very high precision. In addition, our method does not require full-state measurements and effectively promotes both system stability and network sparsity. Monte Carlo simulations illustrate that our method has 100% or nearly 100% precision, even in the presence of noise. The method should be applicable to a wide range of network inference contexts, including biological networks and power systems.

1901.00741

Muhammad Junaid Farooq

Muhammad Junaid Farooq and Quanyan Zhu

Modeling, Analysis, and Mitigation of Dynamic Botnet Formation in Wireless IoT Networks

IEEE Transactions on Information Forensics and Security 2019

10.1109/TIFS.2019.2898817

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The Internet of Things (IoT) relies heavily on wireless communication devices that are able to discover and interact with other wireless devices in their vicinity. The communication flexibility coupled with software vulnerabilities in devices, due to low cost and short time-to-market, exposes them to a high risk of malware infiltration. Malware may infect a large number of network devices using device-to-device (D2D) communication resulting in the formation of a botnet, i.e., a network of infected devices controlled by a common malware. A botmaster may exploit it to launch a network-wide attack sabotaging infrastructure and facilities, or for malicious purposes such as collecting ransom. In this paper, we propose an analytical model to study the D2D propagation of malware in wireless IoT networks. Leveraging tools from dynamic population processes and point process theory, we capture malware infiltration and coordination process over a network topology. The analysis of mean-field equilibrium in the population is used to construct and solve an optimization problem for the network defender to prevent botnet formation by patching devices while causing minimum overhead to network operation. The developed analytical model serves as a basis for assisting the planning, design, and defense of such networks from a defender's standpoint.

1901.00792

Vitalii Kurbatov

V. G. Kurbatov and I.V. Kurbatova

An estimate of Green's function of the problem of bounded solutions in the case of a triangular coefficient

10 pages

math.NA cs.NA math.DS math.SP

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

An estimate of Green's function of the bounded solutions problem for the ordinary differential equation $x'(t)-Bx(t)=f(t)$ is proposed. It is assumed that the matrix coefficient $B$ is triangular. This estimate is a generalization of the estimate of the matrix exponential proved by Ch. F. Van Loan.

1901.00852

Hasan Zakeri

Hasan Zakeri and Panos J. Antsaklis

Passivity and Passivity Indices of Nonlinear Systems Under Operational Limitations using Approximations

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we will discuss how operational limitations affect input-output behaviours of the system. In particular, we will provide formulations for passivity and passivity indices of a nonlinear system given operational limitations on the input and state variables. This formulation is presented in the form of local passivity and indices. We will provide optimisation based formulation to derive passivity properties of the system through polynomial approximations. Two different approaches are taken to approximate the nonlinear dynamics of a system through polynomial functions; namely, Taylor's theorem and a multivariate generalisation of Bernstein polynomials. For each approach, conditions for stability, dissipativity, and passivity of a system, as well as methods to find its passivity indices, are given. Two different methods are also presented to reduce the size of the optimisation problem in Taylor's theorem approach. Examples are provided to show the applicability of the results.

1901.00913

Zixuan Chen

Zixuan Chen and James Nagy and Yuanzhe Xi and Bo Yu

Structured FISTA for Image Restoration

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we propose an efficient numerical scheme for solving some large scale ill-posed linear inverse problems arising from image restoration. In order to accelerate the computation, two different hidden structures are exploited. First, the coefficient matrix is approximated as the sum of a small number of Kronecker products. This procedure not only introduces one more level of parallelism into the computation but also enables the usage of computationally intensive matrix-matrix multiplications in the subsequent optimization procedure. We then derive the corresponding Tikhonov regularized minimization model and extend the fast iterative shrinkage-thresholding algorithm (FISTA) to solve the resulting optimization problem. Since the matrices appearing in the Kronecker product approximation are all structured matrices (Toeplitz, Hankel, etc.), we can further exploit their fast matrix-vector multiplication algorithms at each iteration. The proposed algorithm is thus called structured fast iterative shrinkage-thresholding algorithm (sFISTA). In particular, we show that the approximation error introduced by sFISTA is well under control and sFISTA can reach the same image restoration accuracy level as FISTA. Finally, both the theoretical complexity analysis and some numerical results are provided to demonstrate the efficiency of sFISTA.

1901.00917

Reza Ghaffari

Reza Ghaffari, Roger A. Sauer

A nonlinear thermomechanical formulation for anisotropic volume and surface continua

math.NA cs.NA physics.class-ph

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

A thermomechanical, polar continuum formulation under finite strains is proposed for anisotropic materials using a multiplicative decomposition of the deformation gradient. First, the kinematics and conservation laws for three dimensional, polar and non-polar continua are obtained. Next, these kinematics are connected to their corresponding counterparts for surface continua based on Kirchhoff-Love kinematics. Likewise, the conservation laws for Kirchhoff-Love shells are derived from their three dimensional counterparts. From this, the weak forms are obtained for three dimensional non-polar continua and Kirchhoff-Love shells. These formulations are expressed in tensorial form so that they can be used in both curvilinear and Cartesian coordinates. They can be used to model anisotropic crystals and soft biological materials, and they can be extended to other field equations, like Maxwell's equations to model thermo-electro-magneto-mechanical materials.

1901.00960

Guangyuan Pan

Matthew Muresan, Liping Fu, Guangyuan Pan

Adaptive Traffic Signal Control with Deep Reinforcement Learning An Exploratory Investigation

Transportation Research Board Annual Meeting 2018

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper presents the results of a new deep learning model for traffic signal control. In this model, a novel state space approach is proposed to capture the main attributes of the control environment and the underlying temporal traffic movement patterns, including time of day, day of the week, signal status, and queue lengths. The performance of the model was examined over nine weeks of simulated data on a single intersection and compared to a semi-actuated and fixed time traffic controller. The simulation analysis shows an average delay reductions of 32% when compared to actuated control and 37% when compared to fixed time control. The results highlight the potential for deep reinforcement learning as a signal control optimization method.

1901.01006

Ian Mitchell

Ian M. Mitchell and Jacob Budzis and Andriy Bolyachevets

Invariant, Viability and Discriminating Kernel Under-Approximation via Zonotope Scaling

eess.SY cs.SY math.OC

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Scalable safety verification of continuous state dynamic systems has been demonstrated through both reachability and viability analyses using parametric set representations; however, these two analyses are not interchangable in practice for such parametric representations. In this paper we consider viability analysis for discrete time affine dynamic systems with adversarial inputs. Given a set of state and input constraints, and treating the inputs in best-case and/or worst-case fashion, we construct invariant, viable and discriminating sets, which must therefore under-approximate the invariant, viable and discriminating kernels respectively. The sets are constructed by scaling zonotopes represented in center-generator form. The scale factors are found through efficient convex optimizations. The results are demonstrated on two toy examples and a six dimensional nonlinear longitudinal model of a quadrotor.

1901.01038

Junyang Jin

Junyang Jin and Ye Yuan and Jorge Goncalves

A Full Bayesian Approach to Sparse Network Inference using Heterogeneous Datasets

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Network inference has been attracting increasing attention in several fields, notably systems biology, control engineering and biomedicine. To develop a therapy, it is essential to understand the connectivity of biochemical units and the internal working mechanisms of the target network. A network is mainly characterized by its topology and internal dynamics. In particular, sparse topology and stable system dynamics are fundamental properties of many real-world networks. In recent years, kernel-based methods have been popular in the system identification community. By incorporating empirical Bayes, this framework, which we call KEB, is able to promote system stability and impose sparse network topology. Nevertheless, KEB may not be ideal for topology detection due to local optima and numerical errors. Here, therefore, we propose an alternative, data-driven, method that is designed to greatly improve inference accuracy, compared with KEB. The proposed method uses dynamical structure functions to describe networks so that the information of unmeasurable nodes is encoded in the model. A powerful numerical sampling method, namely reversible jump Markov chain Monte Carlo (RJMCMC), is applied to explore full Bayesian models effectively. Monte Carlo simulations indicate that our approach produces more accurate networks compared with KEB methods. Furthermore, simulations of a synthetic biological network demonstrate that the performance of the proposed method is superior to that of the state-of-the-art method, namely iCheMA. The implication is that the proposed method can be used in a wide range of applications, such as controller design, machinery fault diagnosis and therapy development.

1901.01044

Doosung Choi

Doosung Choi, Junbeom Kim, Mikyoung Lim

Shape reconstruction of a conductivity inclusion using the Faber polynomials

13 pages

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We consider the shape reconstruction of a conductivity inclusion in two dimensions. We use the concept of Faber polynomials Polarization Tensors (FPTs) introduced in \cite{choi:2018:GME} to derive an exact shape recovery formula for an inclusion with the extreme conductivity. This shape can be a good initial guess in the shape recovery optimization for an inclusion with either small or large conductivity values. We illustrate and validate our results with numerical examples.

1901.01051

Rahul Vigneswaran K

Rahul Vigneswaran K, Soman KP

An Insight into the Dynamics and State Space Modelling of a 3-D Quadrotor

16 pages, 6 figures

eess.SY cs.AI cs.RO cs.SY math.CA

http://creativecommons.org/licenses/by/4.0/

Drones have gained popularity in a wide range of field ranging from aerial photography, aerial mapping, and investigation of electric power lines. Every drone that we know today is carrying out some kind of control algorithm at the low level in order to manoeuvre itself around. For the quadrotor to either control itself autonomously or to develop a high-level user interface for us to control it, we need to understand the basic mathematics behind how it functions. This paper aims to explain the mathematical modelling of the dynamics of a 3 Dimensional quadrotor. As it may seem like a trivial task, it plays a vital role in how we control the drone. Also, additional effort has been taken to explain the transformations of the drone's frame of reference to the inertial frame of reference.

1901.01102

Dong Cheng

Dong Cheng and Kit Ian Kou

Multichannel reconstruction from nonuniform samples with application to image recovery

27 pages, 9 figures

Journal of Computational and Applied Mathematics, Volume 367, 15 March 2020, 112502

10.1016/j.cam.2019.112502

math.CA cs.NA eess.IV math.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The multichannel trigonometric reconstruction from uniform samples was proposed recently. It not only makes use of multichannel information about the signal but is also capable to generate various kinds of interpolation formulas according to the types and amounts of the collected samples. The paper presents the theory of multichannel interpolation from nonuniform samples. Two distinct models of nonuniform sampling patterns are considered, namely recurrent and generic nonuniform sampling. Each model involves two types of samples: nonuniform samples of the observed signal and its derivatives. Numerical examples and quantitative error analysis are provided to demonstrate the effectiveness of the proposed algorithms. Additionally, the proposed algorithm for recovering highly corrupted images is also investigated. In comparison with the median filter and correction operation treatment, our approach produces superior results with lower errors.

1901.01134

Ciro Javier Diaz Penedo

Eduardo Abreu, Ciro Diaz and Juan Galvis

A convergence analysis of Generalized Multiscale Finite Element Methods

10.1016/j.jcp.2019.06.072

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we consider an approximation method, and a novel general analysis, for second-order elliptic differential equations with heterogeneous multiscale coefficients. We obtain convergence of the Generalized Multi-scale Finite Element Method (GMsFEM) method that uses local eigenvectors in its construction. The analysis presented here can be extended, without great difficulty, to more sophisticated GMsFEMs. For concreteness, the obtained error estimates generalize and simplify the convergence analysis of [J. Comput. Phys. 230 (2011), 937-955]. The GMsFEM method construct basis functions that are obtained by multiplication of (approximation of) local eigenvectors by partition of unity functions. Only important eigenvectors are used in the construction. The error estimates are general and are written in terms of the eigenvalues of the eigenvectors not used in the construction. The error analysis involve local and global norms that measure the decay of the expansion of the solution in terms of local eigenvectors. Numerical experiments are carried out to verify the feasibility of the approach with respect to the convergence and stability properties of the analysis in view of the good scientific computing practice.

1901.01206

Elyes Ahmed

Elyes Ahmed, Jan Martin Nordbotten and Florin Adrian Radu

Adaptive asynchronous time-stepping, stopping criteria, and a posteriori error estimates for fixed-stress iterative schemes for coupled poromechanics problems

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper we develop adaptive iterative coupling schemes for the Biot system modeling coupled poromechanics problems. We particularly consider the space-time formulation of the fixed-stress iterative scheme, in which we first solve the problem of flow over the whole space-time interval, then exploiting the space-time information for solving the mechanics. Two common discretizations of this algorithm are then introduced based on two coupled mixed finite element methods in-space and the backward Euler scheme in-time. Therefrom, adaptive fixed-stress algorithms are build on conforming reconstructions of the pressure and displacement together with equilibrated flux and stresses reconstructions. These ingredients are used to derive a posteriori error estimates for the fixed-stress algorithms, distinguishing the different error components, namely the spatial discretization, the temporal discretization, and the fixed-stress iteration components. Precisely, at the iteration $k\geq 1$ of the adaptive algorithm, we prove that our estimate gives a guaranteed and fully computable upper bound on the energy-type error measuring the difference between the exact and approximate pressure and displacement. These error components are efficiently used to design adaptive asynchronous time-stepping and adaptive stopping criteria for the fixed-stress algorithms. Numerical experiments illustrate the efficiency of our estimates and the performance of the adaptive iterative coupling algorithms.

1901.01322

Gerrit Welper

G. Welper

Transformed Snapshot Interpolation with High Resolution Transforms

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In the last few years, several methods have been developed to deal with jump singularities in parametric or stochastic hyperbolic PDEs. They typically use some alignment of the jump-sets in physical space before performing well established reduced order modelling techniques such as reduced basis methods, POD or simply interpolation. In the current literature, the transforms are typically of low resolution in space, mostly low order polynomials, Fourier modes or constant shifts. In this paper, we discuss higher resolution transforms in one of the recent methods, the transformed snapshot interpolation (TSI). We introduce a new discretization of the transforms with an appropriate behaviour near singularities and consider their numerical computation via an optimization procedure.

1901.01364

John Evans

Eric L. Peters and John A. Evans

A Divergence-Conforming Hybridized Discontinuous Galerkin Method for the Incompressible Reynolds Averaged Navier-Stokes Equations

10.1002/fld.4745

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We introduce a hybridized discontinuous Galerkin method for the incompressible Reynolds Averaged Navier-Stokes equations coupled with the Spalart-Allmaras one equation turbulence model. With a special choice of velocity and pressure spaces for both element and trace degrees of freedom, we arrive at a method which returns point-wise divergence-free mean velocity fields and properly balances momentum and energy. We further examine the use of different polynomial degrees and meshes to see how the order of the scalar eddy viscosity affects the convergence of the mean velocity and pressure fields, specifically for the method of manufactured solutions. As is standard with hybridized discontinuous Galerkin methods, static condensation can be employed to remove the element degrees of freedom and thus dramatically reduce the global number of degrees of freedom. Numerical results illustrate the effectiveness of the proposed methodology.

1901.01422

Hamed Ghane

Golnoosh Garakani, Hamed Ghane and Mohammad Bagher Menhaj

Control of a 2-DoF robotic arm using a P300-based brain-computer interface

20 pages, 15 figures

cs.HC cs.RO cs.SY eess.SP eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this study, a novel control algorithm for a P-300 based brain-computer interface is fully developed to control a 2-DoF robotic arm. Eight subjects including 5 men and 3 women, perform a 2-dimensional target tracking task in a simulated environment. Their EEG signals from visual cortex are recorded and P-300 components are extracted and evaluated to perform a real-time BCI based controller. The volunteer's intention is recognized and will be decoded as an appropriate command to control the cursor. The final goal of the system is to control a simulated robotic arm in a 2-dimensional space for writing some English letters. The results show that the system allows the robot end-effector to move between arbitrary positions in a point-to-point session with the desired accuracy. This model is tested on and compared with Dataset II of the BCI Competition. The best result is obtained with a multi-class SVM solution as the classifier, with a recognition rate of 97 percent, without pre-channel selection.

1901.01516

Masato Kimura Dr.

Masato Kimura and Atsushi Suzuki

Deformation problem for glued elastic bodies and an alternative iteration method

12 pages

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We study a mathematical model for deformation of glued elastic bodies in 2D or 3D, which is a linear elasticity system with adhesive force on the glued surface. We reveal a variational structure of the model and prove the unique existence of a weak solution based on it. Furthermore, we also consider an alternating iteration method and show that it is nothing but an alternating minimizing method of the total energy. The convergence of a monolithic formulation and the alternating iteration method are numerically studied with the finite element method.

1901.01525

Fr\'ed\'eric Marbach

Jean-Michel Coron, Fr\'ed\'eric Marbach, Franck Sueur, Ping Zhang

On the controllability of the Navier-Stokes equation in a rectangle, with a little help of a distributed phantom force

Notes on arxiv:1801.01860

Journ\'ees EDP 2018

math.AP cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This note echoes the talk given by the second author during the Journ\'ees EDP 2018 in Obernai. Its aim is to provide an overview and a sketch of proof of the result obtained by the authors, concerning the controllability of the Navier-Stokes equation. We refer the interested readers to the original paper for the full technical details of the proof, which will be omitted here, to focus on the main underlying ideas.

1901.01576

Nathalie Cauchi

Nathalie Cauchi, Luca Laurenti, Morteza Lahijanian, Alessandro Abate, Marta Kwiatkowska, and Luca Cardelli

Efficiency through Uncertainty: Scalable Formal Synthesis for Stochastic Hybrid Systems

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This work targets the development of an efficient abstraction method for formal analysis and control synthesis of discrete-time stochastic hybrid systems (SHS) with linear dynamics. The focus is on temporal logic specifications, both over finite and infinite time horizons. The framework constructs a finite abstraction as a class of uncertain Markov models known as interval Markov decision process (IMDP). Then, a strategy that maximizes the satisfaction probability of the given specification is synthesized over the IMDP and mapped to the underlying SHS. In contrast to existing formal approaches, which are by and large limited to finite-time properties and rely on conservative over-approximations, we show that the exact abstraction error can be computed as a solution of convex optimization problems and can be embedded into the IMDP abstraction. This is later used in the synthesis step over both finite- and infinite-horizon specifications, mitigating the known state-space explosion problem. Our experimental validation of the new approach compared to existing abstraction-based approaches shows: (i) significant (orders of magnitude) reduction of the abstraction error; (ii) marked speed-ups; and (iii) boosted scalability, allowing in particular to verify models with more than 10 continuous variables.

1901.01604

Eric Hall

Kimoon Um and Eric Joseph Hall and Markos A. Katsoulakis and Daniel M. Tartakovsky

Causality and Bayesian network PDEs for multiscale representations of porous media

23 pages, 11 figures and 5 tables

Journal of Computational Physics 394 (2019) 658--678

10.1016/j.jcp.2019.06.007

math.NA cs.NA stat.ML

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Microscopic (pore-scale) properties of porous media affect and often determine their macroscopic (continuum- or Darcy-scale) counterparts. Understanding the relationship between processes on these two scales is essential to both the derivation of macroscopic models of, e.g., transport phenomena in natural porous media, and the design of novel materials, e.g., for energy storage. Most microscopic properties exhibit complex statistical correlations and geometric constraints, which presents challenges for the estimation of macroscopic quantities of interest (QoIs), e.g., in the context of global sensitivity analysis (GSA) of macroscopic QoIs with respect to microscopic material properties. We present a systematic way of building correlations into stochastic multiscale models through Bayesian networks. This allows us to construct the joint probability density function (PDF) of model parameters through causal relationships that emulate engineering processes, e.g., the design of hierarchical nanoporous materials. Such PDFs also serve as input for the forward propagation of parametric uncertainty; our findings indicate that the inclusion of causal relationships impacts predictions of macroscopic QoIs. To assess the impact of correlations and causal relationships between microscopic parameters on macroscopic material properties, we use a moment-independent GSA based on the differential mutual information. Our GSA accounts for the correlated inputs and complex non-Gaussian QoIs. The global sensitivity indices are used to rank the effect of uncertainty in microscopic parameters on macroscopic QoIs, to quantify the impact of causality on the multiscale model's predictions, and to provide physical interpretations of these results for hierarchical nanoporous materials.

1901.01652

Longhao Yuan

Longhao Yuan, Chao Li, Jianting Cao and Qibin Zhao

Randomized Tensor Ring Decomposition and Its Application to Large-scale Data Reconstruction

ICASSP submission

10.1109/ICASSP.2019.8682197

math.NA cs.LG cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Dimensionality reduction is an essential technique for multi-way large-scale data, i.e., tensor. Tensor ring (TR) decomposition has become popular due to its high representation ability and flexibility. However, the traditional TR decomposition algorithms suffer from high computational cost when facing large-scale data. In this paper, taking advantages of the recently proposed tensor random projection method, we propose two TR decomposition algorithms. By employing random projection on every mode of the large-scale tensor, the TR decomposition can be processed at a much smaller scale. The simulation experiment shows that the proposed algorithms are $4-25$ times faster than traditional algorithms without loss of accuracy, and our algorithms show superior performance in deep learning dataset compression and hyperspectral image reconstruction experiments compared to other randomized algorithms.

1901.01653

Hendra Nurdin

Jiayin Chen and Hendra I. Nurdin

Learning Nonlinear Input-Output Maps with Dissipative Quantum Systems

33 pages, 12 figures, 2 tables. Close to published version in Quantum Information Processing (https://rdcu.be/bCBUf)

Quantum Infor. Process., 18:198, 2019

10.1007/s11128-019-2311-9

quant-ph cs.LG cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we develop a theory of learning nonlinear input-output maps with fading memory by dissipative quantum systems, as a quantum counterpart of the theory of approximating such maps using classical dynamical systems. The theory identifies the properties required for a class of dissipative quantum systems to be {\em universal}, in that any input-output map with fading memory can be approximated arbitrarily closely by an element of this class. We then introduce an example class of dissipative quantum systems that is provably universal. Numerical experiments illustrate that with a small number of qubits, this class can achieve comparable performance to classical learning schemes with a large number of tunable parameters. Further numerical analysis suggests that the exponentially increasing Hilbert space presents a potential resource for dissipative quantum systems to surpass classical learning schemes for input-output maps.

1901.01742

Argyrios Petras

A. Petras, L. Ling, C. Piret, S.J. Ruuth

A least-squares implicit RBF-FD closest point method and applications to PDEs on moving surfaces

10.1016/j.jcp.2018.12.031

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The closest point method (Ruuth and Merriman, J. Comput. Phys. 227(3):1943-1961, [2008]) is an embedding method developed to solve a variety of partial differential equations (PDEs) on smooth surfaces, using a closest point representation of the surface and standard Cartesian grid methods in the embedding space. Recently, a closest point method with explicit time-stepping was proposed that uses finite differences derived from radial basis functions (RBF-FD). Here, we propose a least-squares implicit formulation of the closest point method to impose the constant-along-normal extension of the solution on the surface into the embedding space. Our proposed method is particularly flexible with respect to the choice of the computational grid in the embedding space. In particular, we may compute over a computational tube that contains problematic nodes. This fact enables us to combine the proposed method with the grid based particle method (Leung and Zhao, J. Comput. Phys. 228(8):2993-3024, [2009]) to obtain a numerical method for approximating PDEs on moving surfaces. We present a number of examples to illustrate the numerical convergence properties of our proposed method. Experiments for advection-diffusion equations and Cahn-Hilliard equations that are strongly coupled to the velocity of the surface are also presented.

1901.01780

Niklas Kochdumper M.Sc.

Niklas Kochdumper, Matthias Althoff

Sparse Polynomial Zonotopes: A Novel Set Representation for Reachability Analysis

IEEE Transactions on Automatic Control 2020

10.1109/TAC.2020.3024348

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We introduce sparse polynomial zonotopes, a new set representation for formal verification of hybrid systems. Sparse polynomial zonotopes can represent non-convex sets and are generalizations of zonotopes, polytopes, and Taylor models. Operations like Minkowski sum, quadratic mapping, and reduction of the representation size can be computed with polynomial complexity w.r.t. the dimension of the system. In particular, for reachability analysis of nonlinear systems, the wrapping effect is substantially reduced using sparse polynomial zonotopes, as demonstrated by numerical examples. In addition, we can significantly reduce the computation time compared to zonotopes when dealing with nonlinear dynamics.

1901.01791

Faizal Hafiz

Faizal Hafiz and Akshya Swain and Eduardo Mendes

Orthogonal Floating Search Algorithms: From The Perspective of Nonlinear System Identification

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The present study proposes a new Orthogonal Floating Search framework for structure selection of nonlinear systems by adapting the existing floating search algorithms for feature selection. The proposed framework integrates the concept of orthogonal space and consequent Error-Reduction-Ratio (ERR) metric with the existing floating search algorithms. On the basis of this framework, three well-known feature selection algorithms have been adapted which include the classical Sequential Forward Floating Search (SFFS), Improved sequential Forward Floating Search (IFFS) and Oscillating Search (OS). This framework retains the simplicity of classical Orthogonal Forward Regression with ERR (OFR-ERR) and eliminates the nesting effect associated with OFR-ERR. The performance of the proposed framework has been demonstrated considering several benchmark non-linear systems. The results show that most of the existing feature selection methods can easily be tailored to identify the correct system structure of nonlinear systems.

1901.01816

Qingnan Sun

Qingnan Sun, Marko V. Jankovic, Jo\~ao Budzinski, Brett Moore, Peter Diem, Christoph Stettler, Stavroula G. Mougiakakou

A dual mode adaptive basal-bolus advisor based on reinforcement learning

9 pages, 8 figures, accepted by Journal of Biomedical and Health Informatics in December 2018

10.1109/JBHI.2018.2887067

eess.SY cs.LG cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Self-monitoring of blood glucose (SMBG) and continuous glucose monitoring (CGM) are commonly used by type 1 diabetes (T1D) patients to measure glucose concentrations. The proposed adaptive basal-bolus algorithm (ABBA) supports inputs from either SMBG or CGM devices to provide personalised suggestions for the daily basal rate and prandial insulin doses on the basis of the patients' glucose level on the previous day. The ABBA is based on reinforcement learning (RL), a type of artificial intelligence, and was validated in silico with an FDA-accepted population of 100 adults under different realistic scenarios lasting three simulated months. The scenarios involve three main meals and one bedtime snack per day, along with different variabilities and uncertainties for insulin sensitivity, mealtime, carbohydrate amount, and glucose measurement time. The results indicate that the proposed approach achieves comparable performance with CGM or SMBG as input signals, without influencing the total daily insulin dose. The results are a promising indication that AI algorithmic approaches can provide personalised adaptive insulin optimisation and achieve glucose control - independently of the type of glucose monitoring technology.

1901.01919

Rui Chen

Rui Chen, Christos G. Cassandras

Optimization of Ride Sharing Systems Using Event-driven Receding Horizon Control

14 pages, 12 figures

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We develop an event-driven Receding Horizon Control (RHC) scheme for a Ride Sharing System (RSS) in a transportation network where vehicles are shared to pick up and drop off passengers so as to minimize a weighted sum of passenger waiting and traveling times. The RSS is modeled as a discrete event system and the event-driven nature of the controller significantly reduces the complexity of the vehicle assignment problem, thus enabling its real-time implementation. Simulation results using actual city maps and real taxi traffic data illustrate the effectiveness of the RH controller in terms of real-time implementation and performance relative to known greedy heuristics.

1901.01949

Christos Xenophontos

Klio Liotati and Christos Xenophontos

Isogeometric Analysis for singularly perturbed problems in 1-D: a numerical study

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We perform numerical experiments on one-dimensional singularly perturbed problems of reaction-convection-diffusion type, using isogeometric analysis. In particular, we use a Galerkin formulation with B-splines as basis functions. The question we address is: how should the knots be chosen in order to get uniform, exponential convergence in the maximum norm? We provide specific guidelines on how to achieve precisely this, for three different singularly perturbed problems.

1901.01956

Qian Feng

Qian Feng and Sing Kiong Nguang and Wilfrid Perruquetti

Dissipative Stabilization of Linear Systems with Time-Varying General Distributed Delays (Complete Version)

The work is the full version of the paper https://doi.org/10.1016/j.automatica.2020.109227

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

New methods are developed for the stabilization of a linear system with general time-varying distributed delays existing at the system's states, inputs and outputs. In contrast to most existing literature where the function of time-varying delay is continuous and bounded, we assume it to be bounded and measurable. Furthermore, the distributed delay kernels can be any square-integrable function over a bounded interval, where the kernels are handled directly by using a decomposition scenario without using approximations. By constructing a Krasovski\u{i} functional via the application of a novel integral inequality, sufficient conditions for the existence of a dissipative state feedback controller are derived in terms of matrix inequalities without utilizing the existing reciprocally convex combination lemmas. The proposed synthesis (stability) conditions, which take dissipativity into account, can be either solved directly by a standard numerical solver of semidefinite programming if they are convex, or reshaped into linear matrix inequalities, or solved via a proposed iterative algorithm. To the best of our knowledge, no existing methods can handle the synthesis problem investigated in this paper. Finally, numerical examples are presented to demonstrate the effectiveness of the proposed methodologies.

1901.01978

Ke Ma

Ke Ma and P. R. Kumar

Incentive Compatibility in Stochastic Dynamic Systems

arXiv admin note: text overlap with arXiv:1803.06734

10.1109/TAC.2020.2987802

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

While the classic Vickrey-Clarke-Groves mechanism ensures incentive compatibility for a static one-shot game, it does not appear to be feasible to construct a dominant truth-telling mechanism for agents that are stochastic dynamic systems. The contribution of this paper is to show that for a set of LQG agents a mechanism consisting of a sequence of layered payments over time decouples the intertemporal effect of current bids on future payoffs and ensures truth-telling of dynamic states by their agents, if system parameters are known and agents are rational. Additionally, it is shown that there is a "Scaled" VCG mechanism that simultaneously satisfies incentive compatibility, social efficiency, budget balance as well as individual rationality under a certain "market power balance" condition where no agent is too negligible or too dominant. A further desirable property is that the SVCG payments converge to the Lagrange payments, the payments corresponding to the true price in the absence of strategic considerations, as the number of agents in the market increases. For LQ but non-Gaussian agents the optimal social welfare over the class of linear control laws is achieved.

1901.02090

Bed\v{r}ich Soused\'ik

Bed\v{r}ich Soused\'ik

On adaptive BDDC for the flow in heterogeneous porous media

21 pages, 7 figures

Applications of Mathematics, 64(3), 309-334, 2019

10.21136/AM.2019.0222-18

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We study a method based on Balancing Domain Decomposition by Constraints (BDDC) for a numerical solution of a single-phase flow in heterogenous porous media. The method solves for both flux and pressure variables. The fluxes are resolved in three steps: the coarse solve is followed by subdomain solves and last we look for a divergence-free flux correction and pressures using conjugate gradients with the BDDC preconditioner. Our main contribution is an application of the adaptive algorithm for selection of flux constraints. Performance of the method is illustrated on the benchmark problem from the 10th SPE Comparative Solution Project (SPE 10). Numerical experiments in both 2D and 3D demonstrate that the first two steps of the method exhibit some numerical upscaling properties, and the adaptive preconditioner in the last step allows a significant decrease in number of iterations of conjugate gradients at a small additional cost.

1901.02092

Wenjun Mei

Ge Chen, Wei Su, Wenjun Mei, Francesco Bullo

Convergence Properties of the Heterogeneous Deffuant-Weisbuch Model

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The Deffuant-Weisbuch (DW) model is a bounded-confidence opinion dynamics model that has attracted much recent interest. Despite its simplicity and appeal, the DW model has proved technically hard to analyze and its most basic convergence properties, easy to observe numerically, are only conjectures. This paper solves the convergence problem for the heterogeneous DW model with the weighting factor not less than $1/2$. We establish that, for any positive confidence bounds and initial values, the opinion of each agent will converge to a limit value almost surely, and the convergence rate is exponential in mean square. Moreover, we show that the limiting opinions of any two agents either are the same or have a distance larger than the confidence bounds of the two agents. Finally, we provide some sufficient conditions for the heterogeneous DW model to reach consensus.

1901.02098

Sayak Mukherjee

Sayak Mukherjee, Aranya Chakrabortty, Saman Babaei

Modeling and Quantifying the Impact of Wind Power Penetration on Power System Coherency

8 pages, 11 figures

IEEE Transactions on Power Systems 2020

10.1109/TPWRS.2020.3022832

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper presents a mathematical analysis of how wind generation impacts the coherency property of power systems. Coherency arises from time-scale separation in the dynamics of synchronous generators, where generator states inside a coherent area synchronize over a fast time-scale due to stronger coupling, while the areas themselves synchronize over a slower time-scale due to weaker coupling. This time-scale separation is reflected in the form of a spectral separation in the weighted Laplacian matrix describing the swing dynamics of the generators. However, when wind farms with doubly-fed induction generators (DFIG) are integrated in the system then this Laplacian matrix changes based on both the level of wind penetration and the location of the wind farms. The modified Laplacian changes the effective slow eigenspace of the generators. Depending on penetration level, this change may result in changing the identities of the coherent areas. We develop a theoretical framework to quantify this modification, and validate our results with numerical simulations of the IEEE 68-bus system with one and multiple wind farms. We compare our model based results on clustering with results using measurement-based principal component analysis to substantiate our derivations.

1901.02145

Yu Song

Yu Song, Shengping Gong

Solar-Sail Deep Space Trajectory Optimization Using Successive Convex Programming

25 pages, 10 figures (This is a pre-print of an article accepted in Astrophysics and Space Science. The final authenticated version will be available online at: https://doi.org/10.1007/s10509-019-3597-x)

Astrophysics and Space Science 364 (2019) 106

10.1007/s10509-019-3597-x

cs.CE cs.SY eess.SY

http://creativecommons.org/licenses/by/4.0/

This paper presents a novel methodology for solving the time-optimal trajectory optimization problem for interplanetary solar-sail missions using successive convex programming. Based on the non-convex problem, different convexification technologies, such as change of variables, successive linearization, trust regions and virtual control, are discussed to convert the original problem into the formulation of successive convex programming. Because of the free final-time, successive linearization is performed iteratively for the nonconvex terminal state constraints. After the convexification process, each of problems becomes a convex problem, which can be solved effectively. An augmented objective function is introduced to ensure the convergence performance and effectiveness of our algorithm. After that, algorithms are designed to solve the discrete sub-problems in a successive solution procedure. Finally, numerical results demonstrate the effectiveness and accuracy of our algorithms.

1901.02228

Henrik Schumacher

Sebastian Scholtes and Henrik Schumacher and Max Wardetzky

Variational Convergence of Discrete Elasticae

38 pages, 6 figures

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We discuss a discretization by polygonal lines of the Euler-Bernoulli bending energy and of Euler elasticae under clamped boundary conditions. We show Hausdorff convergence of the set of almost minimizers of the discrete bending energy to the set of smooth Euler elasticae under mesh refinement in (i) the $W^{1,\infty}$-topology for piecewise-linear interpolation and in (ii) the $W^{2,p}$-topology, $p \in{[2,\infty[}$, using a suitable smoothing operator to create $W^{2,p}$-curves from polygons.

1901.02285

Giovanni Stabile

Saddam Hijazi and Giovanni Stabile and Andrea Mola and Gianluigi Rozza

Non-Intrusive Polynomial Chaos Method Applied to Full-Order and Reduced Problems in Computational Fluid Dynamics: a Comparison and Perspectives

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this work, Uncertainty Quantification (UQ) based on non-intrusive Polynomial Chaos Expansion (PCE) is applied to the CFD problem of the flow past an airfoil with parameterized angle of attack and inflow velocity. To limit the computational cost associated with each of the simulations required by the non-intrusive UQ algorithm used, we resort to a Reduced Order Model (ROM) based on Proper Orthogonal Decomposition (POD)-Galerkin approach. A first set of results is presented to characterize the accuracy of the POD-Galerkin ROM developed approach with respect to the Full Order Model (FOM) solver (OpenFOAM). A further analysis is then presented to assess how the UQ results are affected by substituting the FOM predictions with the surrogate ROM ones.

1901.02303

Kishan Prudhvi Guddanti

Kishan Prudhvi Guddanti, Amarsagar Reddy Ramapuram Matavalam, Yang Weng

PMU-based Distributed Non-iterative Algorithm for Real-time Voltage Stability Monitoring

IEEE Transactions on Smart Grid, Volume: 11, Issue: 6, Nov. 2020, Page(s): 5203 - 5215

10.1109/TSG.2020.3007063

eess.SY cs.DC cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The Phasor measurement unit (PMU) measurements are mandatory to monitor the power system's voltage stability margin in an online manner. Monitoring is key to the secure operation of the grid. Traditionally, online monitoring of voltage stability using synchrophasors required a centralized communication architecture, which leads to high investment cost and cyber-security concerns. The increasing importance of cyber-security and low investment cost have recently led to the development of distributed algorithms for online monitoring of the grid that are inherently less prone to malicious attacks. In this work, a novel distributed non-iterative voltage stability index (VSI) is proposed by recasting the power flow equations as circles. The online computations of VSI are simultaneously performed by the processors embedded at each bus in the smart grid with the help of PMUs and communication of voltage phasors between neighboring buses. The distributed nature of the index enables the real-time identification of the critical bus of the system with minimal communication infrastructure. The effectiveness of the proposed distributed index is demonstrated on IEEE test systems and contrasted with existing methods to show the benefits of the proposed method in speed, interpretability, identification of outage location, and low sensitivity to noisy measurements.

1901.02315

Kae-An Liu

Kae-An Liu, Hans-Dieter Lang and Costas D. Sarris

Computation of High-Order Electromagnetic Field Derivatives with FDTD and the Complex-Step Derivative Approximation

Submitted to IEEE Transactions on Antennas and Propagation (Aug-31-2018)

10.1109/TAP.2019.2905693

math.NA cs.CE cs.NA physics.comp-ph

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper introduces a new approach for the computation of electromagnetic field derivatives, up to any order, with respect to the material and geometric parameters of a given geometry, in a single Finite-Difference Time-Domain (FDTD) simulation. The proposed method is based on embedding the complex-step derivative (CSD) approximation into the standard FDTD update equations. Being finite-difference free, CSD provides accurate derivative approximations even for very small perturbations of the design parameters, unlike finite-difference approximations that are prone to subtractive cancellation errors. The availability of accurate approximations of field derivatives with respect to design parameters enables studies such as sensitivity analysis of multiple objective functions (as derivatives of those can be derived from field derivatives via the chain rule), uncertainty quantification, as well as multi-parametric modeling and optimization of electromagnetic structures. The theory, FDTD implementation and applications of this technique are presented.

1901.02330

Franco Dassi

F. Dassi, S. Scacchi

Parallel solvers for virtual element discretizations of elliptic equations in mixed form

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The aim of this paper is twofold. On the one hand, we test numerically the performance of mixed virtual elements in three dimensions for the first time in the literature to solve the mixed formulation of three-dimensional elliptic equations on polyhedral meshes. On the other hand, we focus on the parallel solution of the linear system arising from such discretization, considering both direct and iterative parallel solvers. In the latter case, we develop two block preconditioners, one based on the approximate Schur complement and one on a regularization technique. Both these topics are numerically validated by several parallel tests performed on a Linux cluster. More specifically, we show that the proposed VEM discretization recovers the expected theoretical convergence properties and we analize the performance of the direct and iterative parallel solvers taken into account.

1901.02369

Dario Izzo

Dharmesh Tailor, Dario Izzo

Learning the optimal state-feedback via supervised imitation learning

cs.LG cs.NE cs.SY eess.SY stat.ML

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Imitation learning is a control design paradigm that seeks to learn a control policy reproducing demonstrations from expert agents. By substituting expert demonstrations for optimal behaviours, the same paradigm leads to the design of control policies closely approximating the optimal state-feedback. This approach requires training a machine learning algorithm (in our case deep neural networks) directly on state-control pairs originating from optimal trajectories. We have shown in previous work that, when restricted to low-dimensional state and control spaces, this approach is very successful in several deterministic, non-linear problems in continuous-time. In this work, we refine our previous studies using as a test case a simple quadcopter model with quadratic and time-optimal objective functions. We describe in detail the best learning pipeline we have developed, that is able to approximate via deep neural networks the state-feedback map to a very high accuracy. We introduce the use of the softplus activation function in the hidden units of neural networks showing that it results in a smoother control profile whilst retaining the benefits of rectifiers. We show how to evaluate the optimality of the trained state-feedback, and find that already with two layers the objective function reached and its optimal value differ by less than one percent. We later consider also an additional metric linked to the system asymptotic behaviour - time taken to converge to the policy's fixed point. With respect to these metrics, we show that improvements in the mean absolute error do not necessarily correspond to better policies.

1901.02390

Ahmad Taha

Shen Wang and Ahmad F. Taha and Jianhui Wang and Karla Kvaternik and Adam Hahn

Energy Crowdsourcing and Peer-to-Peer Energy Trading in Blockchain-Enabled Smart Grids

12 pages, In Press

IEEE Transactions on Systems, Man and Cybernetics: Systems, 2019

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The power grid is rapidly transforming, and while recent grid innovations increased the utilization of advanced control methods, the next-generation grid demands technologies that enable the integration of distributed energy resources (DERs)---and consumers that both seamlessly buy and sell electricity. This paper develops an optimization model and blockchain-based architecture to manage the operation of crowdsourced energy systems (CES), with peer-to-peer (P2P) energy trading transactions. An operational model of CESs in distribution networks is presented considering various types of energy trading transactions and crowdsourcees. Then, a two-phase operation algorithm is presented: Phase I focuses on the day-ahead scheduling of generation and controllable DERs, whereas Phase II is developed for hour-ahead or real-time operation of distribution networks. The developed approach supports seamless P2P energy trading between individual prosumers and/or the utility. The presented operational model can also be used to operate islanded microgrids. The CES framework and the operation algorithm are then prototyped through an efficient blockchain implementation, namely the IBM Hyperledger Fabric. This implementation allows the system operator to manage the network users to seamlessly trade energy. Case studies and prototype illustration are provided.

1901.02434

Iasson Karafyllis

Iasson Karafyllis, Tarek Ahmed-Ali and Fouad Giri

Sampled-Data Observers for 1-D Parabolic PDEs with Non-Local Outputs

20 pages, submitted to Systems and Control Letters for possible publication

math.OC cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The present work provides a systematic approach for the design of sampled-data observers to a wide class of 1-D, parabolic PDEs with non-local outputs. The studied class of parabolic PDEs allows the presence of globally Lipschitz nonlinear and non-local terms in the PDE. Two different sampled-data observers are presented: one with an inter-sample predictor for the unavailable continuous measurement signal and one without an inter-sample predictor. Explicit conditions on the upper diameter of the (uncertain) sampling schedule for both designs are derived for exponential convergence of the observer error to zero in the absence of measurement noise and modeling errors. Moreover, explicit estimates of the convergence rate can be deduced based on the knowledge of the upper diameter of the sampling schedule. When measurement noise and/or modeling errors are present, Input-to-Output Stability (IOS) estimates of the observer error hold for both designs with respect to noise and modeling errors. The main results are illustrated by two examples which show how the proposed methodology can be extended to other cases (e.g., boundary point measurements).

1901.02503

Josef Rebenda Ph.D.

Josef Rebenda, Zden\v{e}k \v{S}marda

A Numerical Approach for Solving of Fractional Emden-Fowler Type Equations

Proceedings of International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2017)

10.1063/1.5043786

math.NA cs.NA math.CA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In the paper, we utilize the fractional differential transformation (FDT) to solving singular initial value problem of fractional Emden-Fowler type differential equations. The solutions of our model equations are calculated in the form of convergent series with fast computable components. The numerical results show that the approach is correct, accurate and easy to implement when applied to fractional differential equations.

1901.02520

Yuchen He

Yuchen He and Sung Ha Kang

Lattice Identification and Separation: Theory and Algorithm

30 Pages plus 4 pages of Appendix. 4 Pages of References. 24 Figures

eess.IV cs.CV cs.NA math.MG math.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Motivated by lattice mixture identification and grain boundary detection, we present a framework for lattice pattern representation and comparison, and propose an efficient algorithm for lattice separation. We define new scale and shape descriptors, which helps to considerably reduce the size of equivalence classes of lattice bases. These finitely many equivalence relations are fully characterized by modular group theory. We construct the lattice space $\mathscr{L}$ based on the equivalent descriptors and define a metric $d_{\mathscr{L}}$ to accurately quantify the visual similarities and differences between lattices. Furthermore, we introduce the Lattice Identification and Separation Algorithm (LISA), which identifies each lattice patterns from superposed lattices. LISA finds lattice candidates from the high responses in the image spectrum, then sequentially extracts different layers of lattice patterns one by one. Analyzing the frequency components, we reveal the intricate dependency of LISA's performances on particle radius, lattice density, and relative translations. Various numerical experiments are designed to show LISA's robustness against a large number of lattice layers, moir\'{e} patterns and missing particles.

1901.02597

Fatemeh Ghassemi

Iman Jahandideh, Fatemeh Ghassemi, Marjan Sirjani

Hybrid Rebeca: Modeling and Analyzing of Cyber-Physical Systems

eess.SY cs.SY

http://creativecommons.org/publicdomain/zero/1.0/

In cyber-physical systems like automotive systems, there are components like sensors, actuators, and controllers that communicate asynchronously with each other. The computational model of actor supports modeling distributed asynchronously communicating systems. We propose Hybrid Rebeca language to support modeling of cyber-physical systems. Hybrid Rebeca is an extension of actor-based language Rebeca. In this extension, physical actors are introduced as new computational entities to encapsulate physical behaviors. To support various means of communication among the entities, the network is explicitly modeled as a separate entity from actors. We derive hybrid automata as the basis for analysis of Hybrid Rebeca models. We demonstrate the applicability of our approach through a case study in the domain of automotive systems. We use SpaceEx framework for the analysis of the case study.

1901.02693

Yuncheng Du

Jeongeun Son, Yuncheng Du

Model-based Stochastic Fault Detection and Diagnosis for Lithium-ion Batteries

Processes, 2019

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Lithium-ion battery (Li-ion) is becoming the dominant energy storage solution in many applications such as hybrid electric and electric vehicles, due to its higher energy density and longer life cycle. For these applications, the battery should perform reliably and pose no safety threats. However, the performance of Li-ion batteries can be affected by abnormal thermal behaviors, defined as faults. It is essential to develop reliable thermal management system to accurately predict and monitor thermal behaviors of Li-ion battery. Using the first-principle models of batteries, this work presents a stochastic fault detection and diagnosis (FDD) algorithm to identify two particular faults in the Li-ion battery cells, using easily measured quantities such as temperatures. Models of Li-ion battery are typically derived from the underlying physical phenomena. To make model tractable and useful, it is common to make simplifications during model development, which may consequently introduce mismatch between models and battery cells. Further, FDD algorithms can be affected by uncertainty, which may originate from either intrinsic time varying phenomena or model calibration with noisy data. A two-step FDD algorithm is developed in this work to correct model of Li-ion battery cells and to identify faulty operations from a normal operating condition. An iterative optimization problem is proposed to correct the model by incorporating the errors between measured quantities and model predictions, which is followed by an optimization-based FDD to provide a probabilistic description of the occurrence of possible faults, while taking the uncertainty into account. The two-step stochastic FDD algorithm in this work is shown to be efficient in terms of fault detection rate for both individual and simultaneous faults in Li-ion batteries, as compared to Monte Carlo (MC) simulations.

1901.02725

Sabato Manfredi Dr.

David Angeli and Sabato Manfredi

On Adversary Robust Consensus protocols through joint-agent interactions

Submitted to Journal

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

A generalized family of Adversary Robust Consensus protocols is proposed and analyzed. These are distributed algorithms for multi-agents systems seeking to agree on a common value of a shared variable, even in the presence of faulty or malicious agents which are updating their local state according to the protocol rules. In particular, we adopt monotone joint-agent interactions, a very general mechanism for processing locally available information and allowing cross-comparisons between state-values of multiple agents simultaneously. The salient features of the proposed class of algorithms are abstracted as a Petri Net and convergence criteria for the resulting time evolutions formulated by employing structural invariants of the net.

1901.02756

Lei Wang

Lei Wang, Christopher M. Kellett

Adaptive Semiglobal Nonlinear Output Regulation:An Extended-State Observer Approach

8 pages and 3 figures

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper proposes a new extended-state observer-based framework for adaptive nonlinear regulator design of a class of nonlinear systems, in the general nonequilibrium theory. By augmenting an extended-state observer with an internal model, one is able to obtain an estimate of the term containing uncertain parameters, which then makes it possible to design an adaptive internal model in the presence of a general nonlinearly parameterized immersion condition.

1901.02782

David G\'omez-Guti\'errez

R. Aldana-L\'opez, D. G\'omez-Guti\'errez, E. Jim\'enez-Rodr\'iguez, J. D. S\'anchez-Torres, M. Defoort

On the design of new classes of fixed-time stable systems with predefined upper bound for the settling time

Please cite the publisher's version. For the publisher's version and full citation details see: https://doi.org/10.1080/00207179.2021.1936190 The following links provide access, for a limited time, to a free copy of the publisher's version: https://www.tandfonline.com/eprint/BMPX5CUSEVFJYHHPMEES/full?target=10.1080/00207179.2021.1936190

International Journal of Control, 2021

10.1080/00207179.2021.1936190

math.OC cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper aims to provide a methodology for generating autonomous and non-autonomous systems with a fixed-time stable equilibrium point where an Upper Bound of the Settling Time (UBST) is set a priori as a parameter of the system. In addition, some conditions for such an upper bound to be the least one are provided. This construction procedure is a relevant contribution when compared with traditional methodologies for generating fixed-time algorithms satisfying time constraints since current estimates of an UBST may be too conservative. The proposed methodology is based on time-scale transformations and Lyapunov analysis. It allows the presentation of a broad class of fixed-time stable systems with predefined UBST, placing them under a common framework with existing methods using time-varying gains. To illustrate the effectiveness of our approach, we generate novel, autonomous and non-autonomous, fixed-time stable algorithms with predefined least UBST.

1901.02792

Kevin Carlberg

Stefano Pagani, Andrea Manzoni, Kevin Carlberg

Statistical closure modeling for reduced-order models of stationary systems by the ROMES method

Submitted to SIAM/ASA Journal on Uncertainty Quantification

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This work proposes a technique for constructing a statistical closure model for reduced-order models (ROMs) applied to stationary systems modeled as parameterized systems of algebraic equations. The proposed technique extends the reduced-order-model error surrogates (ROMES) method to closure modeling. The original ROMES method applied Gaussian-process regression to construct a statistical model that maps cheaply computable error indicators (e.g., residual norm, dual-weighted residuals) to a random variable for either (1) the norm of the state error or (2) the error in a scalar-valued quantity of interest. Rather than target these two types of errors, this work proposes to construct a statistical model for the state error itself; it achieves this by constructing statistical models for the generalized coordinates characterizing both the in-plane error (i.e., the error in the trial subspace) and a low-dimensional approximation of the out-of-plane error. The former can be considered a statistical closure model, as it quantifies the error in the ROM generalized coordinates. Because any quantity of interest can be computed as a functional of the state, the proposed approach enables any quantity-of-interest error to be statistically quantified a posteriori, as the state-error model can be propagated through the associated quantity-of-interest functional. Numerical experiments performed on both linear and nonlinear stationary systems illustrate the ability of the technique (1) to improve (expected) ROM prediction accuracy by an order of magnitude, (2) to statistically quantify the error in arbitrary quantities of interest, and (3) to realize a more cost-effective methodology for reducing the error than a ROM-only approach in the case of nonlinear systems.

1901.02799

Xiaoping Xie

Hao Luo, Binjie Li, Xiaoping Xie

Convergence analysis of a Petrov-Galerkin method for fractional wave problems with nonsmooth data

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper analyzes the convergence of a Petrov-Galerkin method for time fractional wave problems with nonsmooth data. Well-posedness and regularity of the weak solution to the time fractional wave problem are firstly established. Then an optimal convergence analysis with nonsmooth data is derived. Moreover, several numerical experiments are presented to validate the theoretical results.

1901.02923

Deepan Muthirayan

Deepan Muthirayan, Enrique Baeyens, Pratyush Chakraborty, Kameshwar Poolla and Pramod P. Khargonekar

A Minimal Incentive-based Demand Response Program With Self Reported Baseline Mechanism

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we propose a novel incentive based Demand Response (DR) program with a self reported baseline mechanism. The System Operator (SO) managing the DR program recruits consumers or aggregators of DR resources. The recruited consumers are required to only report their baseline, which is the minimal information necessary for any DR program. During a DR event, a set of consumers, from this pool of recruited consumers, are randomly selected. The consumers are selected such that the required load reduction is delivered. The selected consumers, who reduce their load, are rewarded for their services and other recruited consumers, who deviate from their reported baseline, are penalized. The randomization in selection and penalty ensure that the baseline inflation is controlled. We also justify that the selection probability can be simultaneously used to control SO's cost. This allows the SO to design the mechanism such that its cost is almost optimal when there are no recruitment costs or at least significantly reduced otherwise. Finally, we also show that the proposed method of self-reported baseline outperforms other baseline estimation methods commonly used in practice.

1901.03017

Sean Anderson

Sean Anderson, Vineet J. Nair

Electric Vehicle Charge Scheduling on Highway Networks from an Aggregate Cost Perspective

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we attempt to optimally schedule the charging of long-range battery electric vehicles (BEVs) along highway networks, in order to minimize aggregate costs to the overall system consisting of utilities or electricity providers, station operators and other infrastructure, as well as EV users. Thus, we approach the problem from the perspective of both customers (EV car owners), as well as charging station operators and utilities using a hybrid systems based formulation.

1901.03018

Yahya Javed

Yahya Javed, Muhamad Felemban, Tawfeeq Shawly, Jason Kobes and Arif Ghafoor

A Partition-Driven Integrated Security Architecture for Cyber-Physical Systems

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Emerging cyber-physical systems incorporate systems of systems that have functional interdependencies. With the increase in complexity of the cyber-physical systems, the attack surface also expands, making cyber-physical systems more vulnerable to cyber-attacks. The functional interdependencies exacerbate the security risk as a cyber-attack that compromises one constituent system of a cyber-physical system can disseminate to others. This can result in a cascade effect that can impair the operability of the whole cyber-physical system. In this article, we present a novel security architecture that localizes the cyber-attack in a timely manner, and simultaneously recovers the affected cyber-physical system functionality. We have evaluated the performance of the architecture for advanced metering infrastructure-based pricing cyber-attacks scenario. The simulation results exhibit the effectiveness of the proposed architecture in containing the attack in terms of system availability and its impact on the electric load distribution in the power grid.

1901.03069

Nicolas Gillis

Neelam Choudhary, Nicolas Gillis, Punit Sharma

On approximating the nearest \Omega-stable matrix

14 pages, 3 figures

Numerical Linear Algebra with Applications 27 (3), e2282, 2020

10.1002/nla.2282

math.OC cs.NA math.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we consider the problem of approximating a given matrix with a matrix whose eigenvalues lie in some specific region \Omega, within the complex plane. More precisely, we consider three types of regions and their intersections: conic sectors, vertical strips and disks. We refer to this problem as the nearest \Omega-stable matrix problem. This includes as special cases the stable matrices for continuous and discrete time linear time-invariant systems. In order to achieve this goal, we parametrize this problem using dissipative Hamiltonian matrices and linear matrix inequalities. This leads to a reformulation of the problem with a convex feasible set. By applying a block coordinate descent method on this reformulation, we are able to compute solutions to the approximation problem, which is illustrated on some examples.

1901.03177

Mourad Oulghelou

M. Oulghelou and C. Allery

Non intrusive method for parametric model order reduction using a bi-calibrated interpolation on the Grassmann manifold

25 pages

math.NA cs.NA physics.flu-dyn

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Approximating solutions of non-linear parametrized physical problems by interpolation presents a major challenge in terms of accuracy. In fact, pointwise interpolation of such solutions is rarely efficient and leads generally to incorrect results. However, instead of using a straight forward interpolation on solutions, reduced order models can be interpolated. More particularly, Amsallem and Farhat proposed an efficient POD reduced order model interpolation technique based on differential geometry tools. This approach, named in this paper ITSGM (Interpolation On a Tangent Space of the Grassmann Manifold), allows through the passage to the tangent space of the Grassmann manifold, to approximate accurately the reduced order basis associated to a new untrained parameter. This basis is used afterwards to build the interpolated ROM describing the temporal dynamics by performing the Galerkin projection on the high fidelity model. Such Galerkin ROMs require to access to the underlying high fidelity model, leading by that to intrusive ROMs. In this paper, and contrary to the ITSGM/Galerkin approach, we propose a non-intrusive reduced order modeling method which is independent of the governing equations. This method is named through this paper Bi-CITSGM (Bi-Calibrated ITSGM). It consists first to interpolate the spatial and temporal POD sampling bases considered as representatives of points on Grassmann manifolds, by the ITSGM method. Then, the resulting bases modes are reclassified by introducing two orthogonal matrices. These calibration matrices are determined as analytical solutions of two optimization problems. Results on the flow problem past a circular cylinder where the parameter of interpolation is the Reynolds number, show that for new untrained Reynolds number values, the developed approach produces satisfyingly accurate solutions in a real computational time.

1901.03183

Thanh Nguyen

Thanh T. Nguyen and Michael V. Klibanov

Solving a 1-D inverse medium scattering problem using a new multi-frequency globally strictly convex objective functional

30 pages

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We propose a new approach to constructing globally strictly convex objective functional in a 1-D inverse medium scattering problem using multi-frequency backscattering data. The global convexity of the proposed objective functional is proved using a Carleman estimate. Due to its convexity, no good first guess is required in minimizing this objective functional. We also prove the global convergence of the gradient projection algorithm and derive an error estimate for the reconstructed coefficient. Numerical results show reasonable reconstruction accuracy for simulated data.

1901.03249

Xiangmin Jiao

Aditi Ghai and Xiangmin Jiao

Robust Optimal-Complexity Multilevel ILU for Predominantly Symmetric Systems

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Incomplete factorization is a powerful preconditioner for Krylov subspace methods for solving large-scale sparse linear systems. Existing incomplete factorization techniques, including incomplete Cholesky and incomplete LU factorizations, are typically designed for symmetric or nonsymmetric matrices. For some numerical discretizations of partial differential equations, the linear systems are often nonsymmetric but predominantly symmetric, in that they have a large symmetric block. In this work, we propose a multilevel incomplete LU factorization technique, called PS-MILU, which can take advantage of predominant symmetry to reduce the factorization time by up to half. PS-MILU delivers robustness for ill-conditioned linear systems by utilizing diagonal pivoting and deferred factorization. We take special care in its data structures and its updating and pivoting steps to ensure optimal time complexity in input size under some reasonable assumptions. We present numerical results with PS-MILU as a preconditioner for GMRES for a collection of predominantly symmetric linear systems from numerical PDEs with unstructured and structured meshes in 2D and 3D, and show that PS-MILU can speed up factorization by about a factor of 1.6 for most systems. In addition, we compare PS-MILU against the multilevel ILU in ILUPACK and the supernodal ILU in SuperLU to demonstrate its robustness and lower time complexity.

1901.03323

Euaggelos E. Zotos

Euaggelos E. Zotos, Md Sanam Suraj, Amit Mittal, Rajiv Aggarwal

Comparing the geometry of the basins of attraction, the speed and the efficiency of several numerical methods

Published in International Journal of Applied and Computational Mathematics (IACM). arXiv admin note: text overlap with arXiv:1806.11414

IACM, vol. 4, 105 (2018)

10.1007/s40819-018-0537-3

math.NA cs.NA nlin.CD

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We use simple equations in order to compare the basins of attraction on the complex plane, corresponding to a large collection of numerical methods, of several order. Two cases are considered, regarding the total number of the roots, which act as numerical attractors. For both cases we use the iterative schemes for performing a thorough and systematic classification of the nodes on the complex plane. The distributions of the required iterations as well as the probability and their correlations with the corresponding basins of convergence are also discussed. Our numerical calculations suggest that most of the iterative schemes provide relatively similar convergence structures on the complex plane. In addition, several aspects of the numerical methods are compared in an attempt to obtain general conclusions regarding their speed and efficiency. Moreover, we try to determine how the complexity of the each case influences the main characteristics of the numerical methods.

1901.03433

Ciro Javier Diaz Penedo

Ciro Diaz

Combined use of mixed and hybrid finite elements method with domain decomposition and spectral methods for a study of renormalization for the KPZ model

advisor: Eduardo Abreu. Text in Portuguese

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The focus of this work is the numerical approximation of time-dependent partial differential equations associated to initial-boundary value problems. This master dissertation is mostly concerned with the actual computation of the solution to nonlinear stochastic evolution problems governed by Kardar-Parisi-Zhang (KPZ) models. In addition, the dissertation aims to contribute to corroborate, by means of a large set of numerical experiments, that the initial-boundary value problem with periodic boundary conditions for the equation KPZ is ill-posed and that such equation needs to be renormalized. The approach to discretization of KPZ equation perfomed by means of the use of hybrid and mixed finite elements with a domain decomposition procedure along with a pertinent mollification of the noise. The obtained solution is compared with the well known solution given by the Cole-Hopf transformation of the stochastic heat equation with multiplicative noise. We were able to verify that both solutions exhibit a good agreement, but there is a shift that grows as the support of the mollifier decreases. For the numerical aproximation of the stochastic heat equation we use a state-of-the-art numerical method for evaluating semilinear stochastic PDE , which in turn combine spectral techniques, Taylor's expantions and particular numerical treatment to the underlying noise. Furthermore, a state-of-the-art renormalization procedure introduced by Martin Hairer is used to renormalize KPZ equation that is validated with nontrivial numerical experiments.

1901.03434

Erick Schmidt

Erick Schmidt, Zach A. Ruble, David Akopian, Daniel J. Pack

Software-Defined Radio GNSS Instrumentation for Spoofing Mitigation: A Review and a Case Study

IEEE Trans. Instrum. Meas., pp. 1-17, Oct. 2018, doi: 10.1109/TIM.2018.2869261

10.1109/TIM.2018.2869261

eess.SP cs.CR cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Recently, several global navigation satellite systems (GNSS) emerged following the transformative technology impact of the first GNSS: US Global Positioning System (GPS). The power level of GNSS signals as measured at the earths surface is below the noise floor and is consequently vulnerable against interference. Spoofers are smart GNSS-like interferers, which mislead the receivers into generating false position and time information. While many spoofing mitigation techniques exist, spoofers are continually evolving, producing a cycle of new spoofing attacks and counter-measures against them. Thus, upgradability of receivers becomes an important advantage for maintaining their immunity against spoofing. Software-defined radio (SDR) implementations of a GPS receiver address such flexibility but are challenged by demanding computational requirements of both GNSS signal processing and spoofing mitigation. Therefore, this paper reviews reported SDRs in the context of instrumentation capabilities for both conventional and spoofing mitigation modes. This separation is necessitated by significantly increased computational loads when in spoofing domain. This is demonstrated by a case study budget analysis.

1901.03498

Tianhui Yang

Tianhui Yang, Ammar Qarariyah, Hongmei Kang, Jiansong Deng

Numerical integration over implicitly defined domains with topological guarantee

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Numerical integration over the implicitly defined domains is challenging due to topological variances of implicit functions. In this paper, we use interval arithmetic to identify the boundary of the integration domain exactly, thus getting the correct topology of the domain. Furthermore, a geometry-based local error estimate is explored to guide the hierarchical subdivision and save the computation cost. Numerical experiments are presented to demonstrate the accuracy and the potential of the proposed method.

1901.03605

Lutz Angermann

Lutz Angermann

Semi-discrete finite element approximation applied to Maxwell's equations in nonlinear media

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper the semi-discrete finite element approximation of initial boundary value problems for Maxwell's equations in nonliear media of Kerr-type is investigated. For the case of N\'ed\'elec elements from the first family, a priori error estimates are established for the approximation.

1901.03612

Max Winkler

Max Winkler

Error estimates for the finite element approximation of bilinear boundary control problems

39 pages, 1 figure

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this article a special class of nonlinear optimal control problems involving a bilinear term in the boundary condition is studied. These kind of problems arise for instance in the identification of an unknown space-dependent Robin coefficient from a given measurement of the state, or when the Robin coefficient can be controlled in order to reach a desired state. To this end, necessary and sufficient optimality conditions are derived and several discretization approaches for the numerical solution the optimal control problem are investigated. Considered are both a full discretization and the postprocessing approach meaning that we compute an improved control by a pointwise evaluation of the first-order optimality condition. For both approaches finite element error estimates are shown and the validity of these results is confirmed by numerical experiments.

1901.03619

Paul Beuchat

Paul N. Beuchat, Joseph Warrington, John Lygeros

Accelerated Point-wise Maximum Approach to Approximate Dynamic Programming

14 pages, 3 figures

eess.SY cs.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We describe an approximate dynamic programming approach to compute lower bounds on the optimal value function for a discrete time, continuous space, infinite horizon setting. The approach iteratively constructs a family of lower bounding approximate value functions by using the so-called Bellman inequality. The novelty of our approach is that, at each iteration, we aim to compute an approximate value function that maximizes the point-wise maximum taken with the family of approximate value functions computed thus far. This leads to a non-convex objective, and we propose a gradient ascent algorithm to find stationary points by solving a sequence of convex optimization problems. We provide convergence guarantees for our algorithm and an interpretation for how the gradient computation relates to the state relevance weighting parameter appearing in related approximate dynamic programming approaches. We demonstrate through numerical examples that, when compared to existing approaches, the algorithm we propose computes tighter sub-optimality bounds with less computation time.

1901.03656

Zhiyong Sun

Zhiyong Sun, Qingchen Liu, Na Huang, Changbin Yu, and Brian D. O. Anderson

Cooperative event-based rigid formation control

eess.SY cs.MA cs.RO cs.SY math.OC nlin.PS

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper discusses cooperative stabilization control of rigid formations via an event-based approach. We first design a centralized event-based formation control system, in which a central event controller determines the next triggering time and broadcasts the event signal to all the agents for control input update. We then build on this approach to propose a distributed event control strategy, in which each agent can use its local event trigger and local information to update the control input at its own event time. For both cases, the triggering condition, event function and triggering behavior are discussed in detail, and the exponential convergence of the event-based formation system is guaranteed.

1901.03773

Mahraz Amini

Mahraz Amini, Adil Khurram, Andrew Klem, Mads Almassalkhi, Paul D. H. Hines

A Model-Predictive Control Method for Coordinating Virtual Power Plants and Packetized Resources, with Hardware-in-the-Loop Validation

eess.SY cs.SY math.OC

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we employ a bi-level control system to react to disturbances and balance power mismatch by coordinating distributed energy resources (DERs) under packetized energy management. Packetized energy management (PEM) is a novel bottom-up asynchronous and randomizing coordination paradigm for DERs that guarantees quality of service, autonomy, and privacy to the end-user. A hardware-in-the-loop (HIL) simulation of a cyber-physical system consisting of PEM enabled DERs, flexible virtual power plants (VPPs) and transmission grid is developed in this work. A predictive, energy-constrained dispatch of aggregated PEM-enabled DERs is formulated, implemented, and validated on the HIL cyber-physical platform. The energy state of VPPs, composed of a fleet of diverse DERs distributed in the grid, depending upon the distinct real-time usage of these devices. The experimental results demonstrate that the existing control schemes, such as AGC, dispatch VPPs without regard to their energy state, which leads to unexpected capacity saturation. By accounting for, the energy states of VPPs, model-predictive control (MPC) can optimally dispatch conventional generators and VPPs to overcome disturbances while avoiding undesired capacity saturation. The results show the improvement in dynamics by using MPC over conventional AGC and droop for a system with energy-constrained resource

1901.03780

James Webber

James Webber, Erika Hussey, Eric Miller and Shuchin Aeron

On non-parametric density estimation on linear and non-linear manifolds using generalized Radon transforms

30 pages, 17 figures

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Here we present a new non-parametric approach to density estimation and classification derived from theory in Radon transforms and image reconstruction. We start by constructing a "forward problem" in which the unknown density is mapped to a set of one dimensional empirical distribution functions computed from the raw input data. Interpreting this mapping in terms of Radon-type projections provides an analytical connection between the data and the density with many very useful properties including stable invertibility, fast computation, and significant theoretical grounding. Using results from the literature in geometric inverse problems we give uniqueness results and stability estimates for our methods. We subsequently extend the ideas to address problems in manifold learning and density estimation on manifolds. We introduce two new algorithms which can be readily applied to implement density estimation using Radon transforms in low dimensions or on low dimensional manifolds embedded in $\mathbb{R}^d$. We test our algorithms performance on a range of synthetic 2-D density estimation problems, designed with a mixture of sharp edges and smooth features. We show that our algorithm can offer a consistently competitive performance when compared to the state-of-the-art density estimation methods from the literature.

1901.03826

Thanh-Duong Pham

Duong Thanh Pham and Tung Le

A posteriori error estimates for hypersingular integral equation on spheres with spherical splines

38 pages, 11 figures

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

A posteriori residual and hierarchical upper bounds for the error estimates were proved when solving the hypersingular integral equation on the unit sphere by using the Galerkin method with spherical splines. Based on these a posteriori error estimates, adaptive mesh refining procedures are used to reduce complexity and computational cost of the discrete problems. Numerical experiments illustrate our theoretical results.

1901.03839

Karel in 't Hout

Lynn Boen and Karel J. in 't Hout

Operator splitting schemes for the two-asset Merton jump-diffusion model

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper deals with the numerical solution of the two-dimensional time-dependent Merton partial integro-differential equation (PIDE) for the values of rainbow options under the two-asset Merton jump-diffusion model. Key features of this well-known equation are a two-dimensional nonlocal integral part and a mixed spatial derivative term. For its efficient and stable numerical solution, we study seven recent and novel operator splitting schemes of the implicit-explicit (IMEX) and the alternating direction implicit (ADI) kind. Here the integral part is always conveniently treated in an explicit fashion. The convergence behaviour and the relative performance of the seven schemes are investigated in ample numerical experiments for both European put-on-the-min and put-on-the-average options.

1901.03840

Thomas Dickson Mr

Thomas Dickson, Helen Farr, David Sear, James Blake

Uncertainty in marine weather routing

2019-01

math.NA cs.NA math.DS

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Weather routing methods are essential for planning routes for commercial shipping and recreational craft. This paper provides a methodology for quantifying the significance of numerical error and performance model uncertainty on the predictions returned from a weather routing algorithm. The numerical error of the routing algorithm is estimated by solving the optimum path over different discretizations of the environment. The uncertainty associated with the performance model is linearly varied in order to quantify its significance. The methodology is applied to a sailing craft routing problem: the prediction of the voyaging time for an ethnographic voyaging canoe across long distance voyages in Polynesia. We find that the average numerical error is $0.396\%$, corresponding to $1.05$ hours for an average voyage length of $266.40$ hours. An uncertainty level of $2.5 \%$ in the performance model is seen to correspond to a standard deviation of $\pm 2.41-3.08\%$ of the voyaging time. These results illustrate the significance of considering the influence of numerical error and performance uncertainty when performing a weather routing study.

1901.03872

Kevin Haninger

Kevin Haninger and Masayoshi Tomizuka

Nonparametric Inverse Dynamic Models for Multimodal Interactive Robots

9 pages, 10 figures

cs.RO cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Direct design of a robot's rendered dynamics, such as in impedance control, is now a well-established control mode in uncertain environments. When the physical interaction port variables are not measured directly, dynamic and kinematic models are required to relate the measured variables to the interaction port variables. A typical example is serial manipulators with joint torque sensors, where the interaction occurs at the end-effector. As interactive robots perform increasingly complex tasks, they will be intermittently coupled with additional dynamic elements such as tools, grippers, or workpieces, some of which should be compensated and brought to the robot side of the interaction port, making the inverse dynamics multimodal. Furthermore, there may also be unavoidable and unmeasured external input when the desired system cannot be totally isolated. Towards semi-autonomous robots, capable of handling such applications, a multimodal Gaussian process regression approach to manipulator dynamic modelling is developed. A sampling-based approach clusters different dynamic modes from unlabelled data, also allowing the seperation of perturbed data with significant, irregular external input. The passivity of the overall approach is shown analytically, and experiments examine the performance and safety of this approach on a test actuator.

1901.03895

Richard Linares

Brian Gaudet, Richard Linares, Roberto Furfaro

Learning Accurate Extended-Horizon Predictions of High Dimensional Trajectories

cs.LG cs.SY eess.SY

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

We present a novel predictive model architecture based on the principles of predictive coding that enables open loop prediction of future observations over extended horizons. There are two key innovations. First, whereas current methods typically learn to make long-horizon open-loop predictions using a multi-step cost function, we instead run the model open loop in the forward pass during training. Second, current predictive coding models initialize the representation layer's hidden state to a constant value at the start of an episode, and consequently typically require multiple steps of interaction with the environment before the model begins to produce accurate predictions. Instead, we learn a mapping from the first observation in an episode to the hidden state, allowing the trained model to immediately produce accurate predictions. We compare the performance of our architecture to a standard predictive coding model and demonstrate the ability of the model to make accurate long horizon open-loop predictions of simulated Doppler radar altimeter readings during a six degree of freedom Mars landing. Finally, we demonstrate a 2X reduction in sample complexity by using the model to implement a Dyna style algorithm to accelerate policy learning with proximal policy optimization.

1901.03938

Libo Feng

Libo Feng, Fawang Liu, Ian Turner

An unstructured mesh control volume method for two-dimensional space fractional diffusion equations with variable coefficients on convex domains

18 pages, 5 figures, 9 tables

2020 Journal of Computational and Applied Mathematics

10.1016/j.cam.2019.06.035

math.NA cs.NA

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

In this paper, we propose a novel unstructured mesh control volume method to deal with the space fractional derivative on arbitrarily shaped convex domains, which to the best of our knowledge is a new contribution to the literature. Firstly, we present the finite volume scheme for the two-dimensional space fractional diffusion equation with variable coefficients and provide the full implementation details for the case where the background interpolation mesh is based on triangular elements. Secondly, we explore the property of the stiffness matrix generated by the integral of space fractional derivative. We find that the stiffness matrix is sparse and not regular. Therefore, we choose a suitable sparse storage format for the stiffness matrix and develop a fast iterative method to solve the linear system, which is more efficient than using the Gaussian elimination method. Finally, we present several examples to verify our method, in which we make a comparison of our method with the finite element method for solving a Riesz space fractional diffusion equation on a circular domain. The numerical results demonstrate that our method can reduce CPU time significantly while retaining the same accuracy and approximation property as the finite element method. The numerical results also illustrate that our method is effective and reliable and can be applied to problems on arbitrarily shaped convex domains.

1901.03941

Yao Yao

Yao Yao, Peichao Zhang, Sijie Chen

Aggregating Large-Scale Generalized Energy Storages to Participate in Energy Market and Regulation Market

20 pages, 18 figures

eess.SY cs.SY math.OC

http://arxiv.org/licenses/nonexclusive-distrib/1.0/

This paper proposes a concept of generalized energy storage (GES) to facilitate the integration of large-scale heterogeneous flexible resources with electric/thermal energy storage capacity to participate in multiple markets. First, a generalized state variable referred to as degree of satisfaction (DoS) is defined, and dynamic models with a unified form are derived for different types of GESs. Second, a real-time market-based coordination framework is proposed to facilitate control, and ensure user privacy and device security. Demand curves of different GESs are then developed based on DoS to express their demand urgencies as well as flexibilities. Furthermore, a low-dimensional aggregate dynamic model of a GES cluster is derived thanks to the DoS-equality control feature provided by the design of demand curve. At last, an optimization model for a large-scale GESs to participate in both the energy market and regulation market is established based on the aggregate model. Simulations results demonstrate that the optimization algorithm could effectively reduce the total cost of an aggregator. Additionally, the proposed coordination method has high tracking accuracy and could well satisfy users' diversified power demand.