data2/text/range/10001-15000/695247.txt

Ticket Name: Linux/TDA2: TDA2xx make opencx

Query Text:
Part Number: TDA2 Tool/software: Linux when i make linux_clean make linux make linux_install make -s -j depend make -s -j opencx In the last step encountered an error： # Final executable /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/vision_sdk/bin/tda2xx-evm//apps.out !!! # /bin/sh: 1: cd: can't cd to /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/../ti_components/os_tools/linux/kernel/dsptop/debugss_module/debugss-mod cp: cannot stat ‘/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/../ti_components/os_tools/linux/kernel/dsptop/debugss_module/debugss-mod/debugss_kmodule.ko’: No such file or directory make[6]: *** [linux_app_install] Error 1 make[5]: *** [app_linux_install] Error 2 make[4]: *** [apps_hlos] Error 2 make[3]: *** [apps] Error 2 make[2]: *** [vision_sdk] Error 2 make[1]: *** [_vision_sdk_opencx] Error 2 make: *** [opencx] Error 2 But i have no such directory /ti_components/os_tools/linux/kernel/dsptop/debugss_module/debugss-mod . Where can I get this directory?

Responses:
Has anyone encountered this problem? I'm stuck here. Ask for help.

Hi Xie Baojian, Follow Linux UG - section 2.4.2.2.4 & clone OpenCL supported package Regards Surya

Hi Surya, Thank you for your answer, I have solved the compile problem, but i run the chains_vipSingleCamOpenCLFrameCopySgxDisplay failed, the info is : [HOST] [HOST ] 89.268193 s: [HOST] [IPU2 ] 89.268346 s: CHAINS: Sensor create in progress [HOST] [IPU2 ] 89.268895 s: VIDEO_SENSOR: INST0 : I2C1 : I2C Addr = 0x30 [HOST] [IPU2 ] 89.365796 s: VIDEO_SENSOR: VIP 0: DRV ID 1203 (I2C ADDR 0x30): a635:0000:7fa2 [HOST] [IPU2 ] 89.366101 s: CHAINS: Sensor create ... DONE !!! [HOST] [IPU2 ] 89.381199 s: CAPTURE: Create in progress !!! [HOST] [IPU2 ] 89.381595 s: CAPTURE: VIP1 Slice0 PortA capture mode is [ 8-bit] !!! [HOST] [HOST ] 89.503233 s: IPC_IN_0 : Create in progress !!! [HOST] [IPU2 ] 89.502135 s: CAPTURE: Create Done !!! [HOST] [IPU2 ] 89.502623 s: IPC_OUT_0 : Create in progress !!! [HOST] [IPU2 ] 89.502958 s: IPC_OUT_0 : Create Done !!! ASSERT (chains_vipSingleCamOpenCLFrameCopySgxDisplay_priv.c|chains_vipSingleCamOpenCLFrameCopySgxDisplay_Create|165) [HOST] [HOST ] 89.503812 s: IPC_IN_0 : Create Done !!! [HOST] [HOST ] 89.503904 s: ALG: ERROR: No alg create function specified (algId = 6) !!! Can you give me more help?thank you very much Regards, Xie Baojian

Hi Xie Baojian, Is there any modification in UC ? Refer below link if there are any change in UC e2e.ti.com/.../694186 Regards Surya

Hi Surya, Which file do you mean by UC? i think i have no modification in this file. Regards Xie Baojian

Hi Xie Baojian, Could you please share "appLiblist_a15_0.txt" file under "vision_sdk\binaries\apps\tda2xx_evm_linux_opencx" ? Also share cfg.mk & uc_cfg.mk file under "vision_sdk\apps\configs\tda2xx_evm_linux_opencx" Regards Surya

Hi Surya, appLiblist_a15_0.txt: /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/utils.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/network_utils.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_gate.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_null.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_merge.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_dup.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_sgxFrmcpy.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_algorithm.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_ipcOut.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_select.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_ipcIn.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_sync.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/system.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/links_a15_nullSrc.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/osa.a /home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/vision_sdk/binaries/apps/tda2xx_evm_linux_opencx/lib/tda2xx-evm/a15_0/release/apps.a cfg.mk: # This file defines the modules included in $(MAKECONFIG) config # # Modules are split into, # - Use-cases specified in uc_cfg.mk # - Other system config/feature, specified in this file # # Any specific overrides are also specified in this file # Example, for TDA3x SoC EVE2/3/4 are not present and hence force marked as <blank>, i.e disabled # # # Additional config options # # Configure this parameter to enable using OpenCL with OpenCV # Setting yes enables OpenCL in OpenCV # Anything else disables it OPENCV_OPENCL=yes # # CPUs to included in build # # EVEs, IPU1-1 not required for OpenCx demos hence disabled # for build custom use-cases with EVE and OpenCx, EVE, IPU1-1 # can be enabled as required # PROC_IPU1_0_INCLUDE=yes PROC_IPU1_1_INCLUDE=no PROC_IPU2_INCLUDE=no PROC_A15_0_INCLUDE=yes PROC_DSP1_INCLUDE=yes PROC_DSP2_INCLUDE=no PROC_EVE1_INCLUDE=no PROC_EVE2_INCLUDE=no PROC_EVE3_INCLUDE=no PROC_EVE4_INCLUDE=no VSDK_BOARD_TYPE=TDA2XX_EVM DUAL_A15_SMP_BIOS=no # Supported values: DDR_MEM_512M DDR_MEM=DDR_MEM_512M # Supported values: ipu1_0 ipu1_1 a15_0 none NDK_PROC_TO_USE=a15_0 # Supported values: ipu1_0 none FATFS_PROC_TO_USE=ipu1_0 ifeq ($(OPENCV_OPENCL), yes) FATFS_PROC_TO_USE=a15_0 endif # # Used to control building of algorithm source. # By default algorithm source not included in Vision SDK # BUILD_ALGORITHMS=no # # Applies profile to all cores # # Supported profiles: release debug #PROFILE=debug PROFILE ?= release PROFILE_ipu1_0 ?= $(PROFILE) PROFILE_ipu1_1 ?= $(PROFILE) PROFILE_ipu2 ?= $(PROFILE) PROFILE_c66xdsp_1 ?= $(PROFILE) PROFILE_c66xdsp_2 ?= $(PROFILE) PROFILE_arp32_1 ?= $(PROFILE) PROFILE_arp32_2 ?= $(PROFILE) PROFILE_arp32_3 ?= $(PROFILE) PROFILE_arp32_4 ?= $(PROFILE) PROFILE_a15_0 ?= $(PROFILE) # # For TDA2xx & TDA2Ex - vision SDK can run on either IPU1 or IPU2 subsystem # For TDA3xx - We have only IPU1 and hence IPU1 is the only option # Select IPU primary core from the available IPU1 & IPU2 subsytems # # Supported values: ipu1_0 ipu2 IPU_PRIMARY_CORE=ipu1_0 IPU_SECONDARY_CORE=ipu2 # # Set A15_TARGET_OS # A15 can run Linux or Bios # # A15_TARGET_OS support # Platform BIOS Linux # # TDA2XX_EVM yes yes # TDA3XX_EVM yes no # TDA2EX_EVM yes yes # # Supported values: Bios Linux A15_TARGET_OS=Bios IVAHD_INCLUDE=yes VPE_INCLUDE=yes DSS_INCLUDE=yes # # EMIF ECC and Freedom from Interference (FFI) are clubbed together as they # involve consolidated memory map changes # ECC_FFI_INCLUDE=yes is not supported for DDR_MEM_128M # If ECC_FFI_INCLUDE is set to no - memory map will match older versions. # Firewall configuration and DSP XMC configuration is enabled/disabled using this # flag # Vision SDK does not enable EMIF ECC but expects SBL to enable it. # Vision SDK sets up ECC error handlers irrespective of value of ECC_FFI_INCLUDE. # ECC_FFI_INCLUDE=no AVB_INCLUDE=no # # Enable below macro to enable DCAN integration into Vision SDK. # DCAN_INCLUDE=no CPU_IDLE_ENABLED=yes # # Enable below macro to view the bandwidth used by different IPs in the device # as a graphical plot on the display screen. # DATA_VIS_INCLUDE=no OPENCL_INCLUDE=yes ENABLE_OPENCV=yes ENABLE_OPENCV_TESTS=no BUILD_OPENCV_SRC=no TREAT_WARNINGS_AS_ERROR = no HS_DEVICE=no include $($(MAKEAPPNAME)_PATH)/configs/$(MAKECONFIG)/uc_cfg.mk uc_cfg.mk: ifeq ($(OPENCL_INCLUDE),yes) UC_vip_single_cam_openclcanny_edge=yes UC_vip_single_cam_openclframe_copy=yes endif ifeq ($(ENABLE_OPENCV),yes) UC_vip_single_cam_opencvcanny=yes UC_vip_single_cam_opencvopencldilation=yes ifeq ($(ENABLE_OPENCV_TESTS),yes) UC_vip_single_cam_opencvtests=yes endif endif Regards, Xie Baojian

Hi Xie Baojian, The cfg.mk & uc_cfg.mk file you shared is of tda2xx_evm_bios_opencx Can you share the cfg.mk & uc_cfg.mk file of tda2xx_evm_linux_opencx ? Regards Surya

Hi Regards, i am sorry for my mistake， cfg.mk： # This file defines the modules included in $(MAKECONFIG) config # # Modules are split into, # - Use-cases specified in uc_cfg.mk # - Other system config/feature, specified in this file # # Any specific overrides are also specified in this file # Example, for TDA3x SoC EVE2/3/4 are not present and hence force marked as <blank>, i.e disabled # # # Additional config options # # # CPUs to included in build # # IPU1 (core 0 & 1 are) not supported when IPU_PRIMARY_CORE=ipu2 PROC_IPU1_0_INCLUDE=no PROC_IPU1_1_INCLUDE=no PROC_IPU2_INCLUDE=yes PROC_A15_0_INCLUDE=yes PROC_DSP1_INCLUDE=no PROC_DSP2_INCLUDE=no PROC_EVE1_INCLUDE=no PROC_EVE2_INCLUDE=no PROC_EVE3_INCLUDE=no PROC_EVE4_INCLUDE=no VSDK_BOARD_TYPE=TDA2XX_EVM # Supported values: DDR_MEM_1024M DDR_MEM=DDR_MEM_1024M # Supported values: ipu1_0 ipu1_1 a15_0 none NDK_PROC_TO_USE=none # # Used to control building of algorithm source. # By default algorithm source not included in Vision SDK # BUILD_ALGORITHMS=no # # Applies profile to all cores # # Supported profiles: release debug #PROFILE=debug PROFILE ?= release PROFILE_ipu1_0 ?= $(PROFILE) PROFILE_ipu1_1 ?= $(PROFILE) PROFILE_ipu2 ?= $(PROFILE) PROFILE_c66xdsp_1 ?= $(PROFILE) PROFILE_c66xdsp_2 ?= $(PROFILE) PROFILE_arp32_1 ?= $(PROFILE) PROFILE_arp32_2 ?= $(PROFILE) PROFILE_arp32_3 ?= $(PROFILE) PROFILE_arp32_4 ?= $(PROFILE) PROFILE_a15_0 ?= $(PROFILE) # # For TDA2xx & TDA2Ex - vision SDK can run on either IPU1 or IPU2 subsystem # For TDA3xx - We have only IPU1 and hence IPU1 is the only option # Select IPU primary core from the available IPU1 & IPU2 subsytems # # Supported values: ipu1_0 ipu2 IPU_PRIMARY_CORE=ipu2 IPU_SECONDARY_CORE=ipu1_0 # # Set A15_TARGET_OS # A15 can run Linux or Bios # # A15_TARGET_OS support # Platform BIOS Linux # # TDA2XX_EVM yes yes # TDA3XX_EVM yes no # TDA2EX_EVM yes yes # # Supported values: Bios Linux A15_TARGET_OS=Linux IVAHD_INCLUDE=no VPE_INCLUDE=no DSS_INCLUDE=yes AVB_INCLUDE=no # # Enable below macro to enable DCAN integration into Vision SDK. # DCAN_INCLUDE=no CPU_IDLE_ENABLED=yes # # Enable below macro to view the bandwidth used by different IPs in the device # as a graphical plot on the display screen. # DATA_VIS_INCLUDE=no OPENCL_INCLUDE=yes TREAT_WARNINGS_AS_ERROR = yes HS_DEVICE=no DEFAULT_UBOOT_CONFIG := dra7xx_evm_vision_config DEFAULT_KERNEL_CONFIG := omap2plus_defconfig # For TDA2x DEFAULT_DTB := dra7-evm-infoadas.dtb # # Enable macro for OpenCV # ENABLE_OPENCV=yes CMEM_INCLUDE=yes BUILD_OPENCV_SRC=no BUILD_LLVM=no include $($(MAKEAPPNAME)_PATH)/configs/$(MAKECONFIG)/uc_cfg.mk uc_cfg.mk： ifeq ($(OPENCL_INCLUDE),yes) UC_vip_single_cam_openclframe_copy=yes UC_vip_single_cam_framecopy_sgx_display=yes endif ifeq ($(ENABLE_OPENCV),yes) UC_vip_single_cam_opencvcanny_sgx_display=yes UC_vip_single_cam_opencvopencldilation_sgx_display=yes endif

Hi Xie Baojian, All configs are looking fine Could you please just clean & build (follow below steps) ? From vision_sdk/build folder make clean rm -rf ../binaries (if you have build for some other configs & want to save, move them to some other location) make linux_clean make linux make linux_install make -s -j depend make -s -j opencx Note: dsp_8.1.0 compiler path should be added to system path Regards Surya