data2/text/range/30001+/753988.txt

Ticket Name: Linux/TDA2: TDA2xx linux failed to boot from SD card

Query Text:
Part Number: TDA2 Other Parts Discussed in Thread: PMP, DRA742, DRA752, CSD Tool/software: Linux Hi I have a TDA2xx board and followed the procedure of VisionSDK_LinuxUserGuide.pdf to install the filesystem.now the filesystem can execute the "make -j" command correctly, but when I use the shell .mksdboot.sh to generate a SD card(This step also shows no problem),But when I insert the SD card to boot the TDA2xx,It is not boot correctly and the log is as below: U-Boot SPL 2014.07-dirty (Dec 06 2018 - 09:39:12) DRA752-GP ES2.0 ti_i2c_eeprom_init failed 1 spl_mmc_load_image reading dra7-evm.dtb spl_load_image_fat_os: error reading image dra7-evm.dtb, err - -1 reading u-boot.img reading u-boot.img ti_i2c_eeprom_init failed 1 U-Boot 2014.07-dirty (Dec 06 2018 - 09:39:12) CPU : DRA752-GP ES2.0 Board: DRA74x EVM REV <NULL> I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment serial# not set, setting... SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). SCSI: Net: <ethaddr> not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading uEnv.txt 164 bytes read in 4 ms (40 KiB/s) Loaded environment from uEnv.txt Importing environment from mmc0 ... 5082576 bytes read in 296 ms (16.4 MiB/s) 107679 bytes read in 55 ms (1.9 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x4d8dd0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 reserving fdt memory region: addr=84000000 size=10000000 reserving fdt memory region: addr=a2000000 size=4000000 reserving fdt memory region: addr=a0000000 size=2000000 Loading Device Tree to 83fe2000, end 83fff49e ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.63 (kaosu@fille) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 SMP PREEMPT Sat Nov 5 00:41:20 CST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created CMA memory pool at 0x94000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 16 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0xa8000000, size 32 MiB [ 0.000000] Reserved memory: initialized node cmem@A6000000, compatible id shared-dma-pool [ 0.000000] cma: CMA: reserved 24 MiB at ae000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ed748000 s8640 r8192 d15936 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252176 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=ef281dfe-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 412784K/1014784K available (6743K kernel code, 692K rwdata, 2456K rodata, 376K init, 267K bss, 602000K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc09040d4 (9201 kB) [ 0.000000] .init : 0xc0905000 - 0xc09631c0 ( 377 kB) [ 0.000000] .data : 0xc0964000 - 0xc0a11120 ( 693 kB) [ 0.000000] .bss : 0xc0a1112c - 0xc0a53e54 ( 268 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000457] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000462] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2794592043008ns [ 0.000470] Switching to timer-based delay loop [ 0.001533] Console: colour dummy device 80x30 [ 0.001550] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.001557] This ensures that you still see kernel messages. Please [ 0.001563] update your kernel commandline. [ 0.001578] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.001590] pid_max: default: 32768 minimum: 301 [ 0.001703] Security Framework initialized [ 0.001754] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001766] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.026880] CPU: Testing write buffer coherency: ok [ 0.027123] /cpus/cpu@0 missing clock-frequency property [ 0.027161] /cpus/cpu@1 missing clock-frequency property [ 0.027173] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.027197] Setting up static identity map for 0x8069c0a8 - 0x8069c118 [ 0.080899] CPU1: Booted secondary processor [ 0.080929] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.081062] Brought up 2 CPUs [ 0.081078] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.081085] CPU: All CPU(s) started in SVC mode. [ 0.081500] devtmpfs: initialized [ 0.082121] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.083875] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.097808] omap_hwmod: tptc0 using broken dt data from edma-controller [ 0.098321] omap_hwmod: tptc1 using broken dt data from edma-controller [ 0.168630] omap_hwmod: vpe: no dt node [ 0.168638] ------------[ cut here ]------------ [ 0.168657] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2581 _init+0x41c/0x478() [ 0.168664] omap_hwmod: vpe: doesn't have mpu register target base [ 0.168670] Modules linked in: [ 0.168684] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.63 #1 [ 0.168691] Backtrace: [ 0.168714] [<c0012138>] (dump_backtrace) from [<c00122d4>] (show_stack+0x18/0x1c) [ 0.168721] r6:60000013 r5:ffffffff r4:00000000 r3:00000000 [ 0.168750] [<c00122bc>] (show_stack) from [<c0692238>] (dump_stack+0x80/0xa0) [ 0.168766] [<c06921b8>] (dump_stack) from [<c0046d50>] (warn_slowpath_common+0x70/0x94) [ 0.168773] r7:00000a15 r6:c0912d0c r5:00000009 r4:ec90de48 [ 0.168799] [<c0046ce0>] (warn_slowpath_common) from [<c0046e18>] (warn_slowpath_fmt+0x38/0x40) [ 0.168805] r8:c09132e0 r7:00000003 r6:00000000 r5:00000000 r4:c09b0a00 [ 0.168834] [<c0046de4>] (warn_slowpath_fmt) from [<c0912d0c>] (_init+0x41c/0x478) [ 0.168841] r3:c082b264 r2:c0823bb8 [ 0.168859] [<c09128f0>] (_init) from [<c0029f74>] (omap_hwmod_for_each+0x38/0x64) [ 0.168866] r10:c094a67c r8:c09132e0 r7:00000000 r6:c09128f0 r5:c0973820 r4:c09b0a00 [ 0.168896] [<c0029f3c>] (omap_hwmod_for_each) from [<c091330c>] (__omap_hwmod_setup_all+0x2c/0x48) [ 0.168903] r7:c090555c r6:c0a11140 r5:00000001 r4:c095fce8 [ 0.168927] [<c09132e0>] (__omap_hwmod_setup_all) from [<c00089a8>] (do_one_initcall+0xf4/0x154) [ 0.168940] [<c00088b4>] (do_one_initcall) from [<c0905cac>] (kernel_init_freeable+0x104/0x1d4) [ 0.168946] r10:c094a67c r9:c094a65c r8:000000e9 r7:c090555c r6:c0a11140 r5:00000001 [ 0.168970] r4:c095fce8 [ 0.168985] [<c0905ba8>] (kernel_init_freeable) from [<c068c8c8>] (kernel_init+0x10/0xf4) [ 0.168991] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c068c8b8 [ 0.169014] r4:00000000 [ 0.169028] [<c068c8b8>] (kernel_init) from [<c000ec20>] (ret_from_fork+0x14/0x34) [ 0.169034] r4:00000000 r3:ec90c000 [ 0.169060] ---[ end trace 70900123c7d4dfb0 ]--- [ 0.171008] omap_hwmod: wd_timer2: no dt node [ 0.171016] ------------[ cut here ]------------ [ 0.171028] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2581 _init+0x41c/0x478() [ 0.171035] omap_hwmod: wd_timer2: doesn't have mpu register target base [ 0.171041] Modules linked in: [ 0.171053] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.14.63 #1 [ 0.171058] Backtrace: [ 0.171075] [<c0012138>] (dump_backtrace) from [<c00122d4>] (show_stack+0x18/0x1c) [ 0.171082] r6:60000013 r5:ffffffff r4:00000000 r3:00000000 [ 0.171106] [<c00122bc>] (show_stack) from [<c0692238>] (dump_stack+0x80/0xa0) [ 0.171119] [<c06921b8>] (dump_stack) from [<c0046d50>] (warn_slowpath_common+0x70/0x94) [ 0.171125] r7:00000a15 r6:c0912d0c r5:00000009 r4:ec90de48 [ 0.171151] [<c0046ce0>] (warn_slowpath_common) from [<c0046e18>] (warn_slowpath_fmt+0x38/0x40) [ 0.171157] r8:c09132e0 r7:00000003 r6:00000000 r5:00000000 r4:c09b0b08 [ 0.171187] [<c0046de4>] (warn_slowpath_fmt) from [<c0912d0c>] (_init+0x41c/0x478) [ 0.171193] r3:c0822fec r2:c0823bb8 [ 0.171211] [<c09128f0>] (_init) from [<c0029f74>] (omap_hwmod_for_each+0x38/0x64) [ 0.171218] r10:c094a67c r8:c09132e0 r7:00000000 r6:c09128f0 r5:c0973820 r4:c09b0b08 [ 0.171246] [<c0029f3c>] (omap_hwmod_for_each) from [<c091330c>] (__omap_hwmod_setup_all+0x2c/0x48) [ 0.171253] r7:c090555c r6:c0a11140 r5:00000001 r4:c095fce8 [ 0.171276] [<c09132e0>] (__omap_hwmod_setup_all) from [<c00089a8>] (do_one_initcall+0xf4/0x154) [ 0.171288] [<c00088b4>] (do_one_initcall) from [<c0905cac>] (kernel_init_freeable+0x104/0x1d4) [ 0.171295] r10:c094a67c r9:c094a65c r8:000000e9 r7:c090555c r6:c0a11140 r5:00000001 [ 0.171317] r4:c095fce8 [ 0.171331] [<c0905ba8>] (kernel_init_freeable) from [<c068c8c8>] (kernel_init+0x10/0xf4) [ 0.171338] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c068c8b8 [ 0.171361] r4:00000000 [ 0.171375] [<c068c8b8>] (kernel_init) from [<c000ec20>] (ret_from_fork+0x14/0x34) [ 0.171381] r4:00000000 r3:ec90c000 [ 0.171393] ---[ end trace 70900123c7d4dfb1 ]--- [ 0.198284] omap_hwmod: dcan1: _wait_target_disable failed [ 0.296213] pinctrl core: initialized pinctrl subsystem [ 0.296960] regulator-dummy: no parameters [ 0.301331] NET: Registered protocol family 16 [ 0.303137] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.305228] cpuidle: using governor ladder [ 0.305238] cpuidle: using governor menu [ 0.352103] syscon 4a002000.tisysconcore: regmap [mem 0x4a002000-0x4a0026cf] registered [ 0.352439] syscon 4a002e00.tisyscon: regmap [mem 0x4a002e00-0x4a002e7b] registered [ 0.355276] OMAP GPIO hardware version 0.1 [ 0.361722] irq: no irq domain found for /ocp/pinmux@4a003400 ! [ 0.368356] platform 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 0.368663] platform 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 0.368952] platform 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 0.385956] platform 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 0.391904] No ATAGs? [ 0.391930] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.391939] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.394852] OMAP DMA hardware revision 0.0 [ 0.423358] bio: create slab <bio-0> at 0 [ 0.438861] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445010] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.445674] platform fixedregulator-sd: Driver reg-fixed-voltage requests probe deferral [ 0.445941] evm_3v3_sw: 3300 mV [ 0.445989] reg-fixed-voltage fixedregulator-evm_3v3_sw: Failed to find supply vin [ 0.446173] reg-fixed-voltage fixedregulator-evm_3v3_sw: Failed to register regulator: -517 [ 0.446192] platform fixedregulator-evm_3v3_sw: Driver reg-fixed-voltage requests probe deferral [ 0.446439] aic_dvdd: 1800 mV [ 0.446500] reg-fixed-voltage fixedregulator-aic_dvdd: Failed to find supply vin [ 0.446682] reg-fixed-voltage fixedregulator-aic_dvdd: Failed to register regulator: -517 [ 0.446701] platform fixedregulator-aic_dvdd: Driver reg-fixed-voltage requests probe deferral [ 0.447005] vmmcwl_fixed: 1800 mV [ 0.447367] vtt_fixed: 1350 mV [ 0.447415] reg-fixed-voltage fixedregulator-vtt: Failed to find supply vin [ 0.447639] reg-fixed-voltage fixedregulator-vtt: Failed to register regulator: -517 [ 0.447658] platform fixedregulator-vtt: Driver reg-fixed-voltage requests probe deferral [ 0.452353] vgaarb: loaded [ 0.452778] i2c-core: driver [palmas] using legacy suspend method [ 0.452787] i2c-core: driver [palmas] using legacy resume method [ 0.453378] SCSI subsystem initialized [ 0.454606] usbcore: registered new interface driver usbfs [ 0.454767] usbcore: registered new interface driver hub [ 0.454940] usbcore: registered new device driver usb [ 0.457196] palmas 0-0058: IRQ missing: skipping irq request [ 0.457531] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.457678] prom_parse: Bad cell count for /ocp/i2c@48070000/tps659038@58 [ 0.459802] smps123: 850 <--> 1500 mV at 1070 mV [ 0.461435] smps45: 850 <--> 1500 mV at 990 mV [ 0.463008] smps6: 850 <--> 1500 mV at 1080 mV [ 0.464458] smps7: 850 <--> 1500 mV at 1050 mV [ 0.466061] smps8: 850 <--> 1500 mV at 1010 mV [ 0.467496] smps9: 1800 mV [ 0.472671] ldo1: 1800 <--> 3300 mV at 3000 mV [ 0.481186] ldo2: 3300 mV [ 0.491394] ldo3: 1800 mV [ 0.492242] LDO4: at 1800 mV [ 0.492810] LDO5: no parameters [ 0.493400] LDO6: no parameters [ 0.493988] LDO7: no parameters [ 0.494557] LDO8: no parameters [ 0.501213] ldo9: 1050 mV [ 0.511239] ldoln: 1800 mV [ 0.521301] ldousb: 3300 mV [ 0.521999] REGEN1: no parameters [ 0.522518] regen2: no parameters [ 0.523081] sysen1: no parameters [ 0.523661] sysen2: no parameters [ 0.524377] pcf857x: probe of 0-0020 failed with error -121 [ 0.524860] pcf857x: probe of 0-0027 failed with error -121 [ 0.525616] pcf857x: probe of 0-0021 failed with error -121 [ 0.526020] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.526906] pcf857x: probe of 1-0026 failed with error -121 [ 0.527639] i2c i2c-1: of_i2c: modalias failure on /ocp/i2c@48072000/hdmirec@31 [ 0.528099] mcp230xx: probe of 1-0027 failed with error -121 [ 0.528587] mcp230xx: probe of 1-0021 failed with error -121 [ 0.529068] mcp230xx: probe of 1-0025 failed with error -121 [ 0.531272] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.531694] omap_i2c 48060000.i2c: bus 2 rev0.12 at 3400 kHz [ 0.532008] media: Linux media interface: v0.10 [ 0.532154] Linux video capture interface: v2.00 [ 0.532384] pps_core: LinuxPPS API ver. 1 registered [ 0.532393] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.532506] PTP clock support registered [ 0.533973] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.534433] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.535543] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.535653] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.535758] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.535872] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.536054] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.536160] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.536945] Advanced Linux Sound Architecture Driver Initialized. [ 0.538284] Switched to clocksource arch_sys_counter [ 0.556775] NET: Registered protocol family 2 [ 0.557481] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.557546] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.557678] TCP: Hash tables configured (established 8192 bind 8192) [ 0.557722] TCP: reno registered [ 0.557735] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.557766] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.557952] NET: Registered protocol family 1 [ 0.558225] RPC: Registered named UNIX socket transport module. [ 0.558234] RPC: Registered udp transport module. [ 0.558241] RPC: Registered tcp transport module. [ 0.558248] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.559354] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.562357] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.658613] bounce pool size: 64 pages [ 0.658884] VFS: Disk quotas dquot_6.5.2 [ 0.658994] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.659605] NFS: Registering the id_resolver key type [ 0.659638] Key type id_resolver registered [ 0.659648] Key type id_legacy registered [ 0.659679] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.659871] msgmni has been set to 712 [ 0.663863] alg: No test for stdrng (krng) [ 0.664040] NET: Registered protocol family 38 [ 0.664069] io scheduler noop registered [ 0.664077] io scheduler deadline registered [ 0.664111] io scheduler cfq registered (default) [ 0.670269] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124 [ 0.708860] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 0.708874] pci_bus 0000:00: root bus resource [io 0x1000-0x10000] [ 0.708886] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.708898] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.709395] PCI: bus0: Fast back to back transfers disabled [ 0.709635] PCI: bus1: Fast back to back transfers enabled [ 0.709753] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.709768] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.709781] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.709802] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.712216] OMAP DSS rev 6.1 [ 0.717522] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 0.717598] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 0.717667] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 0.717735] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 0.717802] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 0.717869] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 0.718677] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.719453] abb_mpu: 1100 <--> 1210 mV [ 0.719811] abb_ivahd: 1060 <--> 1250 mV [ 0.720171] abb_dspeve: 1060 <--> 1250 mV [ 0.720518] abb_gpu: 1060 <--> 1280 mV [ 0.721659] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.726086] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 2.322297] console [ttyS0] enabled [ 2.326588] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 300, base_baud = 3000000) is a 8250 [ 2.335857] platform 48020000.serial: Driver omap8250 requests probe deferral [ 2.344497] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.351692] [drm] Initialized drm 1.1.0 20060810 [ 2.366917] brd: module loaded [ 2.375468] loop: module loaded [ 2.378890] (stk) :sysfs entries created [ 2.382860] (stk) : debugfs entries created [ 2.387132] (hci_tty): inside hci_tty_init [ 2.391804] (hci_tty): allocated 249, 0 [ 2.398171] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 2.404939] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.413521] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.424003] scsi0 : ahci_platform [ 2.427822] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 336 [ 2.437130] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.448168] CAN device driver interface [ 2.453254] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=350) [ 2.464311] usbcore: registered new interface driver asix [ 2.469894] usbcore: registered new interface driver ax88179_178a [ 2.476152] usbcore: registered new interface driver cdc_ether [ 2.482193] usbcore: registered new interface driver smsc95xx [ 2.488105] usbcore: registered new interface driver net1080 [ 2.493955] usbcore: registered new interface driver cdc_subset [ 2.500058] usbcore: registered new interface driver zaurus [ 2.505828] usbcore: registered new interface driver cdc_ncm [ 2.512333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.518908] ehci-pci: EHCI PCI platform driver [ 2.523518] ehci-omap: OMAP-EHCI Host Controller driver [ 2.529230] usbcore: registered new interface driver cdc_wdm [ 2.535082] usbcore: registered new interface driver usb-storage [ 2.542245] mousedev: PS/2 mouse device common for all mice [ 2.550393] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 2.556862] i2c-core: driver [rtc-ds1307] using legacy resume method [ 2.563934] omap_rtc 48838000.rtcss: rtc core: registered 48838000.rtcss as rtc0 [ 2.572261] i2c /dev entries driver [ 2.576896] i2c 1-0037: Driver ov1063x requests probe deferral [ 2.582835] i2c 1-0030: Driver ov1063x requests probe deferral [ 2.590014] Driver for 1-wire Dallas network protocol. [ 2.596271] coproc iva_coproc: probe [ 2.599973] Adding alias for supply vdd,iva_coproc -> vdd,4a0025cc.voltdm [ 2.606791] Adding alias for supply vbb,iva_coproc -> vbb,4a0025cc.voltdm [ 2.614802] coproc iva_coproc: coproc_probe result=0 [ 2.620005] coproc dsp_coproc: probe [ 2.623679] Adding alias for supply vdd,dsp_coproc -> vdd,4a0025e0.voltdm [ 2.630536] Adding alias for supply vbb,dsp_coproc -> vbb,4a0025e0.voltdm [ 2.638421] coproc dsp_coproc: coproc_probe result=0 [ 2.648748] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.655422] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.662988] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.669625] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.778317] ata1: SATA link down (SStatus 0 SControl 300) [ 2.790120] ledtrig-cpu: registered to indicate activity on CPUs [ 2.798481] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 2.819587] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 2.825880] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 2.832217] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.839877] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.847971] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.861018] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 2.866801] omap-sham 4b101000.sham: initialization failed. [ 2.872436] omap-sham: probe of 4b101000.sham failed with error -22 [ 2.879384] usbcore: registered new interface driver usbhid [ 2.884981] usbhid: USB HID core driver [ 2.890230] remoteproc0: 58820000.ipu is available [ 2.895132] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 2.904146] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.914708] remoteproc0: Direct firmware load failed with error -2 [ 2.921127] remoteproc1: 55020000.ipu is available [ 2.926027] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 2.935043] remoteproc0: Falling back to user helper [ 2.940271] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.950898] remoteproc1: Direct firmware load failed with error -2 [ 2.957192] remoteproc1: Falling back to user helper [ 2.962372] remoteproc2: 40800000.dsp is available [ 2.967272] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 2.976432] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.987047] remoteproc2: Direct firmware load failed with error -2 [ 2.993567] remoteproc3: 41000000.dsp is available [ 2.998492] remoteproc2: Falling back to user helper [ 3.003697] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 3.012738] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 3.023311] remoteproc3: Direct firmware load failed with error -2 [ 3.029746] remoteproc3: Falling back to user helper [ 3.036270] platform extcon_usb1: Driver extcon-usb-gpio requests probe deferral [ 3.043846] platform extcon_usb2: Driver extcon-usb-gpio requests probe deferral [ 3.053659] tlv320aic3x-codec 0-0018: Failed to get supply 'IOVDD': -517 [ 3.060410] tlv320aic3x-codec 0-0018: Failed to request supplies: -517 [ 3.067065] i2c 0-0018: Driver tlv320aic3x-codec requests probe deferral [ 3.074285] platform bt_sco_card: Driver asoc-simple-card requests probe deferral [ 3.082553] asoc-simple-card asoc-simple-card.0: hdmi-hifi <-> 58040000.encoder mapping ok [ 3.095270] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 3.102045] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 3.108980] platform primary_sound: Driver davinci_evm requests probe deferral [ 3.117468] oprofile: using timer interrupt. [ 3.121848] nf_conntrack version 0.5.0 (9905 buckets, 39620 max) [ 3.128332] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.133746] TCP: cubic registered [ 3.137074] Initializing XFRM netlink socket [ 3.141451] NET: Registered protocol family 17 [ 3.145932] NET: Registered protocol family 15 [ 3.150492] Bridge firewalling registered [ 3.154525] can: controller area network core (rev 20120528 abi 9) [ 3.160807] NET: Registered protocol family 29 [ 3.165282] can: raw protocol (rev 20120528) [ 3.169584] can: broadcast manager protocol (rev 20120528 t) [ 3.175274] can: netlink gateway (rev 20130117) max_hops=1 [ 3.180851] 8021q: 802.1Q VLAN Support v1.8 [ 3.185092] Key type dns_resolver registered [ 3.189395] NET: Registered protocol family 41 [ 3.194519] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 3.200833] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 3.207477] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[1100000<->1100000]:-22 [ 3.218105] Power Management for TI OMAP4+ devices. [ 3.223213] ThumbEE CPU extension supported. [ 3.227514] Registering SWP/SWPB emulation handler [ 3.232338] SmartReflex Class3 initialized [ 3.238513] vmmcwl_fixed: disabling [ 3.242018] regulator-dummy: disabling [ 3.246028] dmm 4e000000.dmm: workaround for errata i878 in use [ 3.254322] dmm 4e000000.dmm: initialized all PAT entries [ 3.262543] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.269206] [drm] No driver support for vblank timestamp query. [ 3.275159] omapdrm omapdrm.0: No connectors reported connected with modes [ 3.282079] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.292589] [drm] Enabling DMM ywrap scrolling [ 3.303085] Console: switching to colour frame buffer device 128x48 [ 3.314837] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.320798] omapdrm omapdrm.0: registered panic notifier [ 3.326141] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 3.333750] platform fixedregulator-sd: Driver reg-fixed-voltage requests probe deferral [ 3.342435] evm_3v3_sw: 3300 mV [ 3.345718] evm_3v3_sw: supplied by sysen1 [ 3.350418] aic_dvdd: 1800 mV [ 3.353539] aic_dvdd: supplied by evm_3v3_sw [ 3.358225] vtt_fixed: 1350 mV [ 3.361441] vtt_fixed: supplied by sysen2 [ 3.365831] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.372281] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.378645] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.384965] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.391326] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.397645] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.404112] platform 48020000.serial: Driver omap8250 requests probe deferral [ 3.411523] i2c 1-0037: Driver ov1063x requests probe deferral [ 3.417487] i2c 1-0030: Driver ov1063x requests probe deferral [ 3.424146] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 3.430832] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 3.478734] platform extcon_usb1: Driver extcon-usb-gpio requests probe deferral [ 3.488543] platform extcon_usb2: Driver extcon-usb-gpio requests probe deferral [ 3.497632] asoc-simple-card bt_sco_card: bt-sco-pcm <-> 48478000.mcasp mapping ok [ 3.506897] ALSA sound/core/init.c:213 cannot find the slot for index 0 (range 0-1), error: -16 [ 3.515675] davinci_evm primary_sound: ASoC: can't create sound card for card DRA7xx-EVM: -16 [ 3.524302] davinci_evm primary_sound: snd_soc_register_card failed (-16) [ 3.531180] davinci_evm: probe of primary_sound failed with error -16 [ 3.537788] platform fixedregulator-sd: Driver reg-fixed-voltage requests probe deferral [ 3.546221] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.552608] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.558948] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.565182] mmc1: unrecognised EXT_CSD revision 8 [ 3.569927] mmc1: error -22 whilst initialising MMC card [ 3.576394] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.582725] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.589056] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.595489] platform 48020000.serial: Driver omap8250 requests probe deferral [ 3.602885] i2c 1-0037: Driver ov1063x requests probe deferral [ 3.608863] i2c 1-0030: Driver ov1063x requests probe deferral [ 3.615456] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 3.622135] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 3.629602] platform extcon_usb1: Driver extcon-usb-gpio requests probe deferral [ 3.637356] platform extcon_usb2: Driver extcon-usb-gpio requests probe deferral [ 3.688323] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.688332] davinci_mdio 48485000.mdio: detected phy mask fffffffb [ 3.700821] libphy: 48485000.mdio: probed [ 3.704853] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 3.713024] platform fixedregulator-sd: Driver reg-fixed-voltage requests probe deferral [ 3.721814] cpsw 48484000.ethernet: Detected MACID = 50:33:8b:d0:ef:40 [ 3.728630] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.729558] cpsw 48484000.ethernet: cpsw: Detected MACID = 50:33:8b:d0:ef:41 [ 3.741954] omap_rtc 48838000.rtcss: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.742094] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.742217] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.742341] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.742463] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.742586] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.742839] platform 48020000.serial: Driver omap8250 requests probe deferral [ 3.743082] i2c 1-0037: Driver ov1063x requests probe deferral [ 3.743198] i2c 1-0030: Driver ov1063x requests probe deferral [ 3.743997] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 3.744121] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 3.744499] platform extcon_usb1: Driver extcon-usb-gpio requests probe deferral [ 3.744838] platform extcon_usb2: Driver extcon-usb-gpio requests probe deferral [ 3.744968] platform fixedregulator-sd: Driver reg-fixed-voltage requests probe deferral [ 3.745271] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.843485] sr_init: No PMIC hook to init smartreflex [ 3.848910] sr_init: platform driver register failed for SR [ 3.867338] ALSA device list: [ 3.870391] #0: DRA7xx-WiLink [ 3.873547] #1: HDMI 58040000.encoder [ 3.877846] Waiting for root device PARTUUID=ef281dfe-02... Is there any procedure i missed or not done correctly?What hints can be found from the boot information? Thanks! ZeYuLu

Responses:
Hi ZeYuLu, from the version of your kernel and u-boot it seems that you are using very old version of the SDK. Can you try with the latest version (it is based on 4.4 kernel): software-dl.ti.com/.../index_FDS.html Also to what is set fdtfile in your uenv.txt, for TDA2x it should be fdtfile=dra7-evm-infoadas.dtb (at least in current versions) Regards, Yordan

Hi ZeYuLu, I haven't heard back from you, I'm assuming you were able to resolve your issue. If not, just post a reply below (or create a new thread if the thread has locked due to time-out). Regards, Yordan