Ticket Name: Linux/TDA2: vip_single_cam_openclframe_copy No alg create function specified ERROR Query Text: Part Number: TDA2 Tool/software: Linux I have compiled the example of(vip_single_cam_openclframe_copy) successfully， and my config is tda2xx_evm_linux_opencx， Run in a hardware environment ，An error occurred： [HOST] [HOST ] 89.268193 s: [HOST] [IPU2 ] 89.268346 s: CHAINS: Sensor create in progress [HOST] [IPU2 ] 89.268895 s: VIDEO_SENSOR: INST0 : I2C1 : I2C Addr = 0x30 [HOST] [IPU2 ] 89.365796 s: VIDEO_SENSOR: VIP 0: DRV ID 1203 (I2C ADDR 0x30): a635:0000:7fa2 [HOST] [IPU2 ] 89.366101 s: CHAINS: Sensor create ... DONE !!! [HOST] [IPU2 ] 89.381199 s: CAPTURE: Create in progress !!! [HOST] [IPU2 ] 89.381595 s: CAPTURE: VIP1 Slice0 PortA capture mode is [ 8-bit] !!! [HOST] [HOST ] 89.503233 s: IPC_IN_0 : Create in progress !!! [HOST] [IPU2 ] 89.502135 s: CAPTURE: Create Done !!! [HOST] [IPU2 ] 89.502623 s: IPC_OUT_0 : Create in progress !!! [HOST] [IPU2 ] 89.502958 s: IPC_OUT_0 : Create Done !!! ASSERT (chains_vipSingleCamOpenCLFrameCopySgxDisplay_priv.c|chains_vipSingleCamOpenCLFrameCopySgxDisplay_Create|165) [HOST] [HOST ] 89.503812 s: IPC_IN_0 : Create Done !!! [HOST] [HOST ] 89.503904 s: ALG: ERROR: No alg create function specified (algId = 6) !!! How can I solve this problem？ I'm stuck here. Responses: Hi Xie Baojian, This is a duplicate thread Same has been tracked in below thread Can you please close this thread ? Regards Surya Hi Surya, they are two different questions，What you said above thread is a compile problem. i have compiled successful，But i cannot run the example successful. sorry to bother you. Regrads, Xie Baojian Xie Baojian, Could you please share logs from boot ? Regards Surya 4606.boot_log.txt [ OK ] Started Update UTMP about System Boot/Shutdown. [ 6.499631] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=358) [ OK ] Started Network Time Synchronization. Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [ 6.670264] remoteproc1: registered virtio2 (type 7) [ OK ] Started Synchronize System and HW clocks. [ 6.726695] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ OK ] Reached target System Initialization. [ 6.742117] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on dropbear.socket. [ 6.792879] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ 6.846653] scsi host0: ahci [ 6.850642] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 342 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. [ 6.945491] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 Starting Permit User Sessions... Starting TI MultiCore Tools Daemon... Starting Print notice about GPLv3 packages... Starting uim-sysfs.service... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started Kernel Logging Service. Starting Save/Restore Sound Card State... Starting Network Service... [ OK ] Started System Logging Service. [ OK ] Started Permit User Sessions. [FAILED] Failed to start TI MultiCore Tools Daemon.[ 7.227761] ata1: SATA link down (SStatus 0 SControl 300) See 'systemctl status ti-mct-daemon.service' for details. [ OK ] Started Network Service. [ 7.324357] net eth1: initializing cpsw version 1.15 (0) [ 7.367881] net eth0: initialized cpsw ale version 1.4 [ 7.386019] net eth0: ALE Table size 1024 [ 7.400353] NET: Registered protocol family 15 [ 7.419865] net eth1: phy found : id is : 0x20005c7a [ 7.469344] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.496706] net eth0: initializing cpsw version 1.15 (0) [ 7.535041] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.570547] net eth0: phy found : id is : 0x20005c7a [ 7.610123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.743863] Initializing XFRM netlink socket [ 7.995070] remoteproc0: powering up 55020000.ipu [ 8.047979] random: nonblocking pool is initialized [ 8.069162] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 9507952 [ 8.085278] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ OK ] Started Save/Restore Sound Card State. [ 8.202976] remoteproc0: remote processor 55020000.ipu is now up [ 8.230955] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.255294] remoteproc2: powering up 41000000.dsp [ 8.297838] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 7449552 [ 8.322180] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 8.328070] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 8.334023] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 8.433156] remoteproc2: remote processor 41000000.dsp is now up [ 8.451051] virtio_rpmsg_bus virtio1: rpmsg host is online [ 8.467716] remoteproc1: powering up 40800000.dsp [ 8.502748] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 7449552 [ 8.527721] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 8.533607] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 8.539549] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 8.634099] remoteproc1: remote processor 40800000.dsp is now up [ 8.655875] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.717126] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 8.726608] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [ 8.746392] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [ 8.746771] NET: Registered protocol family 41 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ 8.988143] usbcore: registered new interface driver usbfs [ 8.993855] usbcore: registered new interface driver hub [ 8.999622] usbcore: registered new device driver usb [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ 9.076081] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered [ 9.083600] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered [ 9.093323] dwc3 48890000.usb: otg: can't start till gadget registers [ 9.101153] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.106908] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 9.118167] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 9.128358] xhci-hcd xhci-hcd.1.auto: irq 500, io mem 0x488d0000 [ 9.136311] hub 1-0:1.0: USB hub found [ 9.142210] hub 1-0:1.0: 1 port detected [ 9.146678] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.154523] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 9.163527] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.174029] hub 2-0:1.0: USB hub found [ OK ] Started uim-sysfs.service.[ 9.183821] hub 2-0:1.0: 1 port detected Starting rc.pvr.service... [ 9.267612] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ 9.574762] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 9.583820] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started matrix-gui-2.0.service. [ OK ] Started Print notice about GPLv3 packages. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# ./start.sh [ 23.119918] DMA: Module install successful, device major num = 243 [ 23.126220] DRV: Module install successful insmod: ERROR: could not load module ./bin/cmemk.ko: No such file or directory ./disableDssInterruptsOnA15.sh: line 11: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 12: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 13: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 14: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 15: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 16: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 17: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 18: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 19: @0x4A002AC4:: command not found updated 0x4A002AC4 value is 00930000 [HOST] OSA: MEM: 0: Mapped 0xa0100000 to 0xb660d000 of size 0x00100000 [HOST] OSA: MEM: 1: Mapped 0x84203000 to 0xa6c0d000 of size 0x0fa00000 [HOST] OSA: MEM: 2: Mapped 0xa0200000 to 0xa6b4d000 of size 0x00040000 [HOST] OSA: MEM: 3: Mapped 0xa02c0000 to 0xa6b8d000 of size 0x00080000 [HOST] OSA: MEM: 4: Mapped 0x00000000 to 0x00000000 of size 0x00000000 [HOST] OSA: HOST Remote Log Shared Memory @ 0xa024f140 [HOST] OSA: IPU2 Remote Log Shared Memory @ 0xa0363da0 23.353585] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) [ 23.395412] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) [ HOST] [HOST ] 30.010309 s: SYSTEM: System A15 Init in proress !!! [HOST] [HOST ] 30.010400 s: SYSTEM: IPC: Init in progress !!! [HOST] [HOST ] 30.010431 s: SYSTEM: IPC: Notify init in progress !!! [HOST] [HOST ] 30.011498 s: SYSTEM: IPC: [IPU2] socket bind success !!! (dst vproc = 1, endpt = 81) [HOST] [HOST ] 30.011529 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 81) !!! [HOST] [HOST ] 30.011559 s: SYSTEM: IPC: [IPU2] socket connect success !!! (dst vproc = 1, endpt = 80) [HOST] [HOST ] 30.011559 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 1024) !!! [HOST] [HOST ] 30.011681 s: SYSTEM: IPC: Notify init DONE !!! [HOST] [HOST ] 30.011681 s: SYSTEM: MSGQ: MsgQ init in progress !!! [HOST] [HOST ] 30.011773 s: SYSTEM: MSGQ: MsgQ init DONE !!! [HOST] [HOST ] 30.011773 s: SYSTEM: IPC: Init DONE !!! [HOST] [HOST ] 30.011773 s: SYSTEM: Initializing A15 Links !!! [HOST] [HOST ] 30.011895 s: IPC_OUT_0 : Init done - linkid-0x2000000 [HOST] [HOST ] 30.011986 s: IPC_OUT_1 : Init done - linkid-0x2000001 [HOST] [HOST ] 30.012078 s: IPC_OUT_2 : Init done - linkid-0x2000002 [HOST] [HOST ] 30.012139 s: IPC_OUT_3 : Init done - linkid-0x2000003 [HOST] [HOST ] 30.012230 s: IPC_OUT_4 : Init done - linkid-0x2000004 [HOST] [HOST ] 30.012322 s: IPC_IN_0 : Init done - linkid-0x200000a [HOST] [HOST ] 30.012413 s: IPC_IN_1 : Init done - linkid-0x200000b [HOST] [HOST ] 30.012505 s: IPC_IN_2 : Init done - linkid-0x200000c [HOST] [HOST ] 30.012596 s: IPC_IN_3 : Init done - linkid-0x200000d [HOST] [HOST ] 30.012779 s: IPC_IN_4 : Init done - linkid-0x200000e [HOST] [HOST ] 30.012871 s: IPC_IN_5 : Init done - linkid-0x200000f [HOST] [HOST ] 30.012962 s: IPC_IN_6 : Init done - linkid-0x2000010 [HOST] [HOST ] 30.013054 s: NULL_0 : Init done - linkid-0x2000014 [HOST] [HOST ] 30.013115 s: NULL_1 : Init done - linkid-0x2000015 [HOST] [HOST ] 30.013237 s: NULL_SRC_0 : Init done - linkid-0x2000039 [HOST] [HOST ] 30.013328 s: ALGORITHM_0 : Init done - linkid-0x2000031 [HOST] [HOST ] 30.013420 s: ALGORITHM_1 : Init done - linkid-0x2000032 [HOST] [HOST ] 30.013511 s: ALGORITHM_2 : Init done - linkid-0x2000033 [HOST] [HOST ] 30.013603 s: ALGORITHM_3 : Init done - linkid-0x2000034 [HOST] [HOST ] 30.013694 s: ALGORITHM_4 : Init done - linkid-0x2000035 [HOST] [HOST ] 30.013786 s: ALGORITHM_5 : Init done - linkid-0x2000036 [HOST] [HOST ] 30.013877 s: ALGORITHM_6 : Init done - linkid-0x2000037 [HOST] [HOST ] 30.013969 s: ALGORITHM_7 : Init done - linkid-0x2000038 [HOST] [HOST ] 30.014121 s: DUP0 : Init done - linkid-0x0 [HOST] [HOST ] 30.014274 s: DUP1 : Init done - linkid-0x0 [HOST] [HOST ] 30.014426 s: DUP2 : Init done - linkid-0x0 [HOST] [HOST ] 30.014579 s: DUP3 : Init done - linkid-0x0 [HOST] [HOST ] 30.014701 s: DUP4 : Init done - linkid-0x0 [HOST] [HOST ] 30.014823 s: SYNC_0 : Init done - linkid-0x0 [HOST] [HOST ] 30.014975 s: SYNC_1 : Init done - linkid-0x0 [HOST] [HOST ] 30.015097 s: SYNC_2 : Init done - linkid-0x0 [HOST] [HOST ] 30.015250 s: SYNC_3 : Init done - linkid-0x0 [HOST] [HOST ] 30.015402 s: MERGE_0 : Init done - linkid-0x0 [HOST] [HOST ] 30.015555 s: MERGE_1 : Init done - linkid-0x0 [HOST] [HOST ] 30.015677 s: MERGE_2 : Init done - linkid-0x0 [HOST] [HOST ] 30.015799 s: MERGE_3 : Init done - linkid-0x0 [HOST] [HOST ] 30.015921 s: MERGE_4 : Init done - linkid-0x0 [HOST] [HOST ] 30.016073 s: SELECT_0 : Init done - linkid-0x0 [HOST] [HOST ] 30.016195 s: SELECT_1 : Init done - linkid-0x0 [HOST] [HOST ] 30.016317 s: GATE_0 : Init done - linkid-0x0 [HOST] [HOST ] 30.016409 s: GATE_1 : Init done - linkid-0x0 [HOST] [HOST ] 30.016531 s: GATE_2 : Init done - linkid-0x0 [HOST] [HOST ] 30.016653 s: GATE_3 : Init done - linkid-0x0 [HOST] [HOST ] 30.016744 s: SGXFRMCPY_0 : Init done - linkid-0x2000040 [HOST] [HOST ] 30.016775 s: SYSTEM: Initializing A15 Links ... DONE !!! [HOST] [HOST ] 30.017110 s: OSA: Adjusting global time, timeH by 0 units!!! [HOST] [HOST ] 30.017141 s: SYSTEM: System A15 Init Done !!! [HOST] [HOST ] 30.017263 s: NETWORK_CTRL: Starting Server (port=5000) !!! [HOST] [HOST ] 30.017324 s: NETWORK_CTRL: Starting Server ... DONE (port=5000) !!! [HOST] [IPU2 ] 14.933111 s: [HOST] [IPU2 ] EVE1 Image Load Completed [HOST] [IPU2 ] 14.964222 s: [HOST] [IPU2 ] EVE2 Image Load Completed [HOST] [IPU2 ] 14.994692 s: [HOST] [IPU2 ] EVE3 Image Load Completed [HOST] [IPU2 ] 15.025224 s: [HOST] [IPU2 ] EVE4 Image Load Completed [HOST] [IPU2 ] 15.025346 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.025437 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.025498 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.025590 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.025651 s: ***** IPU2 Firmware build time 21:09:18 Apr 2 2018 [HOST] [IPU2 ] 15.025803 s: *** SYSTEM: CPU Frequency , [HOST] [IPU2 ] 15.028884 s: SYSTEM: System Common Init in progress !!! [HOST] [IPU2 ] 15.039712 s: UTILS: CIO: Init Done !!! [HOST] [IPU2 ] 15.039803 s: SYSTEM: IPC init in progress !!! [HOST] [IPU2 ] 15.039925 s: SYSTEM: Attaching to [DSP1] ... [HOST] [IPU2 ] 15.302873 s: SYSTEM: Attaching to [DSP1] ... SUCCESS !!! [HOST] [IPU2 ] 15.305862 s: SYSTEM: Attaching to [DSP2] ... SUCCESS !!! [HOST] [IPU2 ] 15.317971 s: SYSTEM: Attaching to [EVE1] ... SUCCESS !!! [HOST] [IPU2 ] 15.338071 s: SYSTEM: Attaching to [EVE2] ... SUCCESS !!! [HOST] [IPU2 ] 15.358018 s: SYSTEM: Attaching to [EVE3] ... SUCCESS !!! [HOST] [IPU2 ] 15.378057 s: SYSTEM: Attaching to [EVE4] ... SUCCESS !!! [HOST] [IPU2 ] 15.378149 s: SYSTEM: Notify register to [DSP1] line 0, event 15... [HOST] [IPU2 ] 15.378332 s: SYSTEM: Notify register to [DSP2] line 0, event 15... [HOST] [IPU2 ] 15.378454 s: SYSTEM: Notify register to [EVE1] line 0, event 15... [HOST] [IPU2 ] 15.378576 s: SYSTEM: Notify register to [EVE2] line 0, event 15... [HOST] [IPU2 ] 15.378667 s: SYSTEM: Notify register to [EVE3] line 0, event 15... [HOST] [IPU2 ] 15.378789 s: SYSTEM: Notify register to [EVE4] line 0, event 15... [HOST] [IPU2 ] 15.378911 s: SYSTEM: Notify init done !!! [HOST] [IPU2 ] 15.380650 s: SYSTEM: MsgQ init done !!! [HOST] [IPU2 ] 15.381595 s: RpmsgInit in progress... [HOST] [IPU2 ] 15.381656 s: Connection established with HLOS, calling rpmsgInit [HOST] [IPU2 ] 15.382297 s: SYSTEM: IPC init DONE !!! [HOST] [IPU2 ] 15.387390 s: SYSTEM: Initializing TIOVX ... [HOST] [IPU2 ] 15.387573 s: VX_ZONE_INIT:Enabled [HOST] [IPU2 ] 15.387695 s: VX_ZONE_ERROR:Enabled [HOST] [IPU2 ] 15.387817 s: VX_ZONE_WARNING:Enabled [HOST] [IPU2 ] 15.391508 s: VX_ZONE_INIT:[tivxInit:48] Initialization Done !!! [HOST] [IPU2 ] 15.391600 s: SYSTEM: Initializing TIOVX ... Done !!! [HOST] [IPU2 ] 15.391661 s: SYSTEM: System Common Init Done !!! [HOST] [IPU2 ] 15.391722 s: SYSTEM: System Init in progress !!! [HOST] [IPU2 ] 15.391783 s: SYSTEM: BSP Common Init in progress !!! [HOST] [IPU2 ] 15.391874 s: SYSTEM: BSP Common Init Done !!! [HOST] [IPU2 ] 15.391935 s: SYSTEM: BSP Platform Init in progress !!! [HOST] [IPU2 ] 15.392027 s: SYSTEM: BSP Platform Init Done !!! [HOST] [IPU2 ] 15.392088 s: SYSTEM: FVID2 Init in progress !!! [HOST] [IPU2 ] 15.392271 s: SYSTEM: FVID2 Init Done !!! [HOST] [IPU2 ] 15.392362 s: SYSTEM: VPS Init in progress !!! [HOST] [IPU2 ] 15.392423 s: SYSTEM: VPDMA Descriptor Memory Address translation ENABLED [0x80000000 -> 0x80000000] [HOST] [IPU2 ] 15.395412 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.395534 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.395626 s: VPDMA Load Address = 0x4897d004 [HOST] [IPU2 ] 15.395717 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.395809 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.395900 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.396236 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.396327 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.396419 s: VPDMA Load Address = 0x4899d004 [HOST] [IPU2 ] 15.396510 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.396602 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.396693 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.397029 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.397120 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.397242 s: VPDMA Load Address = 0x489bd004 [HOST] [IPU2 ] 15.397334 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.397425 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.397517 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.397852 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.397944 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.398035 s: VPDMA Load Address = 0x489dd004 [HOST] [IPU2 ] 15.398127 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.398249 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.398340 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.457390 s: SYSTEM: VPS Init Done !!! [HOST] [IPU2 ] 15.458366 s: UTILS: DMA: HWI Create for INT25 !!! [HOST] [IPU2 ] 15.458610 s: SYSTEM: SW Message Box Msg Pool, Free Msg Count = 1024 [HOST] [IPU2 ] 15.458701 s: SYSTEM: Heap = LOCAL_DDR @ 0x00000000, Total size = 262144 B (256 KB), Free size = 253744 B (247 KB) [HOST] [IPU2 ] 15.458854 s: SYSTEM: Heap = SR_OCMC @ 0x00000000, Total size = 0 B (0 KB), Free size = 0 B (0 KB) [HOST] [IPU2 ] 15.459006 s: SYSTEM: Heap = SR_DDR_CACHED @ 0x84203000, Total size = 262144000 B (250 MB), Free size = 262144000 B (250 MB) [HOST] [IPU2 ] 15.459250 s: SYSTEM: Heap = SR_DDR_NON_CACHED @ 0xa0100000, Total size = 1045376 B (0 MB), Free size = 851840 B (0 MB) [HOST] [IPU2 ] 15.459403 s: SYSTEM: Initializing Links !!! [HOST] [IPU2 ] 15.720764 s: SYSTEM: Initializing Links ... DONE !!! [HOST] [IPU2 ] 15.806563 s: CHAINS: Application Started !!! [HOST] [IPU2 ] 15.816690 s: BOARD: Board Init in progress !!! [HOST] [IPU2 ] 15.817147 s: BOARD: Board Init Done !!! [HOST] [IPU2 ] 15.825016 s: [HOST] [HOST ] 30.569846 s: [HOST] [HOST ] [HOST] [HOST ] ==================== [HOST] [HOST ] Vision SDK Usecases [HOST] [HOST ] ==================== [HOST] [HOST ] 1: Single Camera Usecases [HOST] [HOST ] 2: Multi-Camera LVDS Usecases [HOST] [HOST ] 3: Open-Compute Usecases [HOST] [HOST ] [HOST] [HOST ] p: CPU Status [HOST] [HOST ] i: Show IP Addr (IPU + NDK + AVB) [HOST] [HOST ] [HOST] [HOST ] s: System Settings [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] z: Exit - AND SHUTDOWN Remote CPUs [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 3 [HOST] [HOST ] 37.817971 s: [HOST] [HOST ] [HOST] [HOST ] OpenCompute Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 2: OpenCV Usecases [HOST] [HOST ] 3: OpenCL Usecases [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] [HOST] [HOST ] 37.818001 s: [HOST] [HOST ] 37.818001 s: Unsupported option ' [HOST] [HOST ] '. Please try again [HOST] [HOST ] 37.818001 s: [HOST] [HOST ] [HOST] [HOST ] OpenCompute Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 2: OpenCV Usecases [HOST] [HOST ] 3: OpenCL Usecases [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 3 [HOST] [HOST ] 40.209876 s: [HOST] [HOST ] 40.209876 s: [HOST] [HOST ] [HOST] [HOST ] OpenCL Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 1: 1CH VIP capture + OpenCL Copy (A15->DSP) + SGX Copy + DISPLAY [HOST] [HOST ] 4: OpenCL framecopy Usecases [HOST] [HOST ] 5: Chains_openclFrameCopy_DecodeDisplay [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 1 [HOST] [HOST ] 43.154120 s: [HOST] [IPU2 ] 43.154303 s: CHAINS: Sensor create in progress [HOST] [IPU2 ] 43.154791 s: VIDEO_SENSOR: INST0 : I2C1 : I2C Addr = 0x30 [HOST] [IPU2 ] 43.250289 s: VIDEO_SENSOR: VIP 0: DRV ID 1203 (I2C ADDR 0x30): a635:0000:7fa2 [HOST] [IPU2 ] 43.250625 s: CHAINS: Sensor create ... DONE !!! [HOST] [IPU2 ] 43.265753 s: CAPTURE: Create in progress !!! [HOST] [IPU2 ] 43.266150 s: CAPTURE: VIP1 Slice0 PortA capture mode is [ 8-bit] !!! [HOST] [HOST ] 43.387360 s: IPC_IN_0 : Create in progress !!! [HOST] [IPU2 ] 43.386262 s: CAPTURE: Create Done !!! [HOST] [IPU2 ] 43.386719 s: IPC_OUT_0 : Create in progress !!! [HOST] [IPU2 ] 43.387085 s: IPC_OUT_0 : Create Done !!! ASSERT (chains_vipSingleCamOpenCLFrameCopySgxDisplay_priv.c|chains_vipSingleCamOpenCLFrameCopySgxDisplay_Create|165) [HOST] [HOST ] 43.387817 s: IPC_IN_0 : Create Done !!! [HOST] [HOST ] 43.387909 s: ALG: ERROR: No alg create function specified (algId = 6) !!! Hi Surya, Above is my boot log, Can you see what's going wrong? Regards, Xie Baojian Hi Xie Baojian, From logs, it is clear cmem module is not loaded dra7xx-evm login: root root@dra7xx-evm:~# ./start.sh [ 23.119918] DMA: Module install successful, device major num = 243 [ 23.126220] DRV: Module install successful insmod: ERROR: could not load module ./bin/cmemk.ko: No such file or directory ./disableDssInterruptsOnA15.sh: line 11: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 12: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 13: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 14: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 15: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 16: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 17: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 18: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 19: @0x4A002AC4:: command not found updated 0x4A002AC4 value is 00930000 can you share the commands you are running in start.sh file Regards Surya 2273.log_2.txt Hi Surya, my start.sh file is: ifconfig eth0 172.17.123.117 netmask 255.255.224.0 mount -t nfs -o nolock,nfsvers=3,vers=3 172.17.123.14:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs /mnt cd /mnt/opt/vision_sdk/ source ./vision_sdk_load.sh ./apps.out I have copy cmemk.ko file to /bin directory, and above is the new log, there are still some problems exist. Regards, Xie Baojian Hi Xie Baojian, Can you run "./load_ocl_kos.sh" before "source ./vision_sdk_load.sh" & try ? Regards Surya 7002.log_3.txt ▒OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 165 bytes read in 2 ms (80.1 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3552144 bytes read in 89 ms (38.1 MiB/s) 106665 bytes read in 28 ms (3.6 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x363390 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff0a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00018-gd326d64 (htf@ubuntu) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Apr 2 20:16:47 CST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=2ca9f500-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 410844K/979968K available (6619K kernel code, 319K rwdata, 2388K rodata, 340K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d402c (9009 kB) [ 0.000000] .init : 0xc08d5000 - 0xc092a000 ( 340 kB) [ 0.000000] .data : 0xc092a000 - 0xc0979d60 ( 320 kB) [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000329] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000336] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000781] Console: colour dummy device 80x30 [ 0.000797] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000803] This ensures that you still see kernel messages. Please [ 0.000809] update your kernel commandline. [ 0.000822] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000835] pid_max: default: 32768 minimum: 301 [ 0.000933] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000944] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001487] Initializing cgroup subsys io [ 0.001504] Initializing cgroup subsys memory [ 0.001528] Initializing cgroup subsys devices [ 0.001540] Initializing cgroup subsys freezer [ 0.001551] Initializing cgroup subsys perf_event [ 0.001563] Initializing cgroup subsys pids [ 0.001590] CPU: Testing write buffer coherency: ok [ 0.001789] /cpus/cpu@0 missing clock-frequency property [ 0.001806] /cpus/cpu@1 missing clock-frequency property [ 0.001816] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001848] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080067] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080135] Brought up 2 CPUs [ 0.080148] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080155] CPU: All CPU(s) started in HYP mode. [ 0.080160] CPU: Virtualization extensions available. [ 0.080538] devtmpfs: initialized [ 0.108944] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.109900] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.312417] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.312437] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.316666] pinctrl core: initialized pinctrl subsystem [ 0.317526] NET: Registered protocol family 16 [ 0.318449] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.340220] cpuidle: using governor ladder [ 0.370248] cpuidle: using governor menu [ 0.378725] OMAP GPIO hardware version 0.1 [ 0.385101] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.401112] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.401125] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.410369] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.410379] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.410843] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.410853] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.411437] OMAP DMA hardware revision 0.0 [ 0.451378] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.452536] edma 43300000.edma: memcpy is disabled [ 0.457187] edma 43300000.edma: TI EDMA DMA engine driver [ 0.461604] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.461789] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.461952] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.462108] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.462403] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.462588] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.465601] palmas 0-0058: IRQ missing: skipping irq request [ 0.481033] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.553339] pcf857x 0-0020: probed [ 0.553901] pcf857x 0-0021: probed [ 0.554050] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554436] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554642] media: Linux media interface: v0.10 [ 0.554693] Linux video capture interface: v2.00 [ 0.554736] pps_core: LinuxPPS API ver. 1 registered [ 0.554744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554767] PTP clock support registered [ 0.554813] EDAC MC: Ver: 3.0.0 [ 0.555563] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555869] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.556198] Advanced Linux Sound Architecture Driver Initialized. [ 0.557029] clocksource: Switched to clocksource arch_sys_counter [ 0.567627] NET: Registered protocol family 2 [ 0.568124] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.568187] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.568312] TCP: Hash tables configured (established 8192 bind 8192) [ 0.568359] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.568390] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568600] NET: Registered protocol family 1 [ 0.568866] RPC: Registered named UNIX socket transport module. [ 0.568875] RPC: Registered udp transport module. [ 0.568881] RPC: Registered tcp transport module. [ 0.568887] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569885] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579854] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580503] NFS: Registering the id_resolver key type [ 0.580532] Key type id_resolver registered [ 0.580540] Key type id_legacy registered [ 0.580594] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581860] bounce: pool size: 64 pages [ 0.582009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.582023] io scheduler noop registered [ 0.582035] io scheduler deadline registered [ 0.582068] io scheduler cfq registered (default) [ 0.586974] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.590181] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.590194] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.590228] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.590249] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.620475] dra7-pcie 51000000.pcie_rc: link is not up [ 0.620651] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.620664] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.620674] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.620684] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.621084] PCI: bus0: Fast back to back transfers disabled [ 0.621205] PCI: bus1: Fast back to back transfers enabled [ 0.621288] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.621303] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.621316] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.621530] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.681878] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.685288] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.693599] console [ttyS0] enabled [ 1.698002] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.707712] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.717769] [drm] Initialized drm 1.1.0 20060810 [ 1.723804] OMAP DSS rev 6.1 [ 1.727597] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.743397] loop: module loaded [ 1.746916] vmemexp device MAJOR num = 246 [ 1.751070] vmemexp class registered [ 1.754783] /dev/vmemexp device registered [ 1.758915] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.764589] nand: No NAND device found [ 1.768379] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.778320] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.783717] 7 ofpart partitions found on MTD device spi32766.0 [ 1.789599] Creating 7 MTD partitions on "spi32766.0": [ 1.794763] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.800877] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.807230] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.814156] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.820861] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.828261] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.834602] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.842393] libphy: Fixed MDIO Bus: probed [ 1.897061] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.903186] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.913543] libphy: 48485000.mdio: probed [ 1.917617] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.925659] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.934370] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6 [ 1.941065] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.948068] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7 [ 1.956678] mousedev: PS/2 mouse device common for all mice [ 1.962896] i2c /dev entries driver [ 1.971657] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.977268] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.983652] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.990208] evm_3v3_sw: supplied by sysen1 [ 2.070811] mmc0: MAN_BKOPS_EN bit is not set [ 2.107640] mmc0: new HS200 MMC card at address 0001 [ 2.123087] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.138144] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.144341] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.152122] ledtrig-cpu: registered to indicate activity on CPUs [ 2.160842] aic_dvdd: supplied by evm_3v3_sw [ 2.166739] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.174441] NET: Registered protocol family 10 [ 2.179856] sit: IPv6 over IPv4 tunneling driver [ 2.185071] NET: Registered protocol family 17 [ 2.189793] Key type dns_resolver registered [ 2.194193] omap_voltage_late_init: Voltage driver support not added [ 2.201120] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.207353] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.214063] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.220315] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.228564] Power Management for TI OMAP4+ devices. [ 2.233636] Registering SWP/SWPB emulation handler [ 2.240595] dmm 4e000000.dmm: initialized all PAT entries [ 2.247952] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.254591] [drm] No driver support for vblank timestamp query. [ 2.260943] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.267801] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.308268] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.321010] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.327936] hctosys: unable to open rtc device (rtc0) [ 2.341317] evm_1v8: disabling [ 2.344390] aic_dvdd: disabling [ 2.347567] vmmcwl_fixed: disabling [ 2.351250] ldousb: disabling [ 2.354641] ALSA device list: [ 2.357636] #0: DRA7xx-EVM [ 2.361177] Waiting for root device PARTUUID=2ca9f500-02... [ 2.566884] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.581937] mmc2: new ultra high speed DDR50 SDHC card at address aaaa [ 2.588823] mmcblk1: mmc2:aaaa SS08G 7.40 GiB [ 2.598428] mmcblk1: p1 p2 [ 2.690533] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.701990] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 3.045157] EXT4-fs (mmcblk1p2): recovery complete [ 3.050857] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.059035] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 3.069759] devtmpfs: mounted [ 3.072963] Freeing unused kernel memory: 340K [ 3.077444] This architecture does not have kernel memory protection. [ 3.201615] systemd[1]: System time before build time, advancing clock. [ 3.232703] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 3.248143] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 3.259802] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.278307] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 3.311216] systemd[1]: Set hostname to . [ 3.370801] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.371681] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.371838] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.429103] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.444482] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.483735] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 3.493239] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 3.503101] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 3.835560] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start [ 3.843375] systemd[1]: sockets.target: Found dependency on rpcbind.socket/start [ 3.850824] systemd[1]: sockets.target: Found dependency on sysinit.target/start [ 3.858276] systemd[1]: sockets.target: Found dependency on alignment.service/start [ 3.865968] systemd[1]: sockets.target: Found dependency on basic.target/start [ 3.873294] systemd[1]: sockets.target: Found dependency on sockets.target/start [ 3.880743] systemd[1]: sockets.target: Breaking ordering cycle by deleting job rpcbind.socket/start [ 3.889935] systemd[1]: rpcbind.socket: Job rpcbind.socket/start deleted to break ordering cycle starting with sockets.target/start [ SKIP ] Ordering cycle found, skipping RPCbind Server Activation Socket [ 3.927362] systemd[1]: alignment.service: Found ordering cycle on alignment.service/start [ 3.935670] systemd[1]: alignment.service: Found dependency on sysinit.target/start [ 3.943382] systemd[1]: alignment.service: Found dependency on alignment.service/start [ 3.951353] systemd[1]: alignment.service: Breaking ordering cycle by deleting job alignment.service/start [ 3.961064] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with alignment.service/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 3.999516] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.027487] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.068744] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.097334] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.127302] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.157394] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.187762] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.217236] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.247289] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.297414] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.334806] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.347945] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.427387] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.443814] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 4.463319] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.489438] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.517430] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.547250] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.567906] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.587795] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.607422] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.637219] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.657266] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.717468] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.747281] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.769624] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.813432] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.837402] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.857264] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 4.877431] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 5.568865] systemd-journald[156]: Received request to flush runtime journal from PID 1 [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ 6.011633] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 Starting Create Volatile Files and Directories...[ 6.032803] remoteproc0: 55020000.ipu is available [ 6.043006] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 6.055746] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.069385] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ OK ] Started udev Coldplug all Devices. [ 6.099014] remoteproc1: 40800000.dsp is available [ 6.104785] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 6.121190] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.136089] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ OK ] Started Load/Save Random Seed. [ 6.154029] remoteproc2: 41000000.dsp is available [ 6.169539] remoteproc2: Note: remoteproc is still under development and considered experimental. [ OK ] Started Create Volatile Files and Directories.[ 6.186468] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Found device /dev/ttyS0. [ 6.363916] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.720898] remoteproc1: registered virtio0 (type 7) [ 6.726211] remoteproc0: registered virtio1 (type 7) Starting Network Time Synchronization... [ 6.757378] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 6.780069] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 Starting Update UTMP about System Boot/Shutdown... [ 6.797423] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 6.803986] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 6.816339] remoteproc2: registered virtio2 (type 7) [ 6.828270] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ 6.939933] SCSI subsystem initialized [ OK ] Reached target System Time Synchronized. [ 6.971813] CAN device driver interface Starting Synchronize System and HW clocks... [ 7.062754] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=358) [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ 7.149488] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.175446] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Listening on D-Bus System Message Bus Socket. [ 7.206511] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Listening on dropbear.socket. [ 7.254258] scsi host0: ahci [ 7.260298] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 342 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Permit User Sessions... [ 7.437906] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Print notice about GPLv3 packages... Starting Save/Restore Sound Card State... [ OK ] Started Kernel Logging Service. Starting Telephony service... Starting uim-sysfs.service... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started System Logging Service. [ OK ] Started D-Bus System Message Bus. [ 7.627477] ata1: SATA link down (SStatus 0 SControl 300) [ 7.828427] NET: Registered protocol family 15 [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. Starting Network Service... Starting TI MultiCore Tools Daemon... Starting Login Service... [ OK ] Started Permit User Sessions. [ OK ] Started Save/Restore Sound Card State. [ 8.079655] Bluetooth: Core ver 2.21 [ 8.083295] NET: Registered protocol family 31 [ 8.110063] Bluetooth: HCI device and connection manager initialized [ 8.116461] Bluetooth: HCI socket layer initialized [ 8.160290] Bluetooth: L2CAP socket layer initialized [ 8.165391] Bluetooth: SCO socket layer initialized [ 8.260617] net eth1: initializing cpsw version 1.15 (0) [ 8.273808] net eth0: initialized cpsw ale version 1.4 [ OK ] Started Network Service. [ 8.298194] net eth0: ALE Table size 1024 [ 8.323708] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8.325073] net eth1: phy found : id is : 0x20005c7a [ 8.346494] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.380315] net eth0: initializing cpsw version 1.15 (0) [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ 8.425001] net eth0: phy found : id is : 0x20005c7a [ 8.468828] Initializing XFRM netlink socket [ 8.474767] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.590945] remoteproc1: powering up 40800000.dsp [ 8.672337] random: nonblocking pool is initialized [ 8.672839] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 7449552 [ 8.679468] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 8.679499] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 8.679577] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 8.768881] remoteproc1: remote processor 40800000.dsp is now up [ 8.795111] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.829754] remoteproc0: powering up 55020000.ipu [ 8.862880] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 9507952 [ 8.897126] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 8.957794] remoteproc0: remote processor 55020000.ipu is now up [ 8.992155] virtio_rpmsg_bus virtio1: rpmsg host is online [ 9.011094] remoteproc2: powering up 41000000.dsp [ 9.045711] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 7449552 [ 9.078854] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 9.084749] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 9.090680] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 9.230420] remoteproc2: remote processor 41000000.dsp is now up [ 9.248601] virtio_rpmsg_bus virtio2: rpmsg host is online [ 9.315959] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [ 9.328408] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 9.347868] NET: Registered protocol family 41 [ 9.375643] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ OK ] Reached target Network. Starting Network Name Resolution... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Started Login Service. [ 9.755675] usbcore: registered new interface driver usbfs [ 9.770193] usbcore: registered new interface driver hub [ 9.782491] usbcore: registered new device driver usb [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ 9.861736] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered [ 9.877125] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered [ 9.884834] dwc3 48890000.usb: otg: can't start till gadget registers [ 9.899210] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.911346] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 9.923427] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 9.937801] xhci-hcd xhci-hcd.1.auto: irq 500, io mem 0x488d0000 [ 9.948906] hub 1-0:1.0: USB hub found [ 9.953618] hub 1-0:1.0: 1 port detected [ 9.961355] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.969647] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 9.979378] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.998173] hub 2-0:1.0: USB hub found [ 10.007001] hub 2-0:1.0: 1 port detected [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 10.210345] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting tiipclad-daemon.service... Starting telnetd.service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** 0.424061] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 10.512555] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [[;32m OK ]Started tiipclad-daemon.service. [[;32m OK ]Started Print notice about GPLv3 packages. [[;32m OK ]Started telnetd.service. tSarting thttpd.service... [[;32m OK ]Started thttpd.service. tSarting rng-tools.service... [[;32m OK ]Started rng-tools.service. tSarting gdbserverproxy.service... [[;32m OK ]Started gdbserverproxy.service. tSarting matrix-gui-2.0.service... [[;32m OK ]Started matrix-gui-2.0.service. tSarting thermal-zone-init.service... [[;32m OK ]Started thermal-zone-init.service. ____ _ _ ____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# ./start.sh Opened log file: lad.txt numProcessors = 5 id = 0 baseId = 0 Spawned daemon: /usr/bin/lad_dra7xx [ 69.578936] CMEMK module: reference Linux version 4.4.84 [ 69.586793] allocated heap buffer 0x40400000 of size 0x100000 [ 69.592998] cmemk initialized insmod: ERROR: could not load module /opt/vision_sdk/debugss_kmodule.ko: No such file or directory insmod: ERROR: could not load module /opt/vision_sdk/gdbserverproxy.ko: No such file or directory [ 69.634689] DMA: Module install successful, device major num = 242 [ 69.641043] DRV: Module install successful insmod: ERROR: could not insert module ./bin/cmemk.ko: File exists ./disableDssInterruptsOnA15.sh: line 11: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 12: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 13: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 14: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 15: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 16: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 17: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 18: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 19: @0x4A002AC4:: command not found updated 0x4A002AC4 value is 00930000 [HOST] OSA: MEM: 0: Mapped 0xa0100000 to 0xb662b000 of size 0x00100000 [HOST] OSA: MEM: 1: Mapped 0x84203000 to 0xa6c2b000 of size 0x0fa00000 [HOST] OSA: MEM: 2: Mapped 0xa0200000 to 0xa6b6b000 of size 0x00040000 [HOST] OSA: MEM: 3: Mapped 0xa02c0000 to 0xa6bab000 of size 0x00080000 [HOST] OSA: MEM: 4: Mapped 0x00000000 to 0x00000000 of size 0x00000000 [HOST] OSA: HOST Remote Log Shared Memory @ 0xa024f140 [HOST] OSA: IPU2 Remote Log Shared Memory @ 0xa0363da0 69.888855] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) [ 69.929824] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) [ HOST] [HOST ] 76.522357 s: SYSTEM: System A15 Init in proress !!! [HOST] [HOST ] 76.522479 s: SYSTEM: IPC: Init in progress !!! [HOST] [HOST ] 76.522479 s: SYSTEM: IPC: Notify init in progress !!! [HOST] [HOST ] 76.523607 s: SYSTEM: IPC: [IPU2] socket bind success !!! (dst vproc = 1, endpt = 81) [HOST] [HOST ] 76.523638 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 81) !!! [HOST] [HOST ] 76.523668 s: SYSTEM: IPC: [IPU2] socket connect success !!! (dst vproc = 1, endpt = 80) [HOST] [HOST ] 76.523699 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 1024) !!! [HOST] [HOST ] 76.523821 s: SYSTEM: IPC: Notify init DONE !!! [HOST] [HOST ] 76.523821 s: SYSTEM: MSGQ: MsgQ init in progress !!! [HOST] [HOST ] 76.523943 s: SYSTEM: MSGQ: MsgQ init DONE !!! [HOST] [HOST ] 76.523943 s: SYSTEM: IPC: Init DONE !!! [HOST] [HOST ] 76.523943 s: SYSTEM: Initializing A15 Links !!! [HOST] [HOST ] 76.524065 s: IPC_OUT_0 : Init done - linkid-0x2000000 [HOST] [HOST ] 76.524187 s: IPC_OUT_1 : Init done - linkid-0x2000001 [HOST] [HOST ] 76.524278 s: IPC_OUT_2 : Init done - linkid-0x2000002 [HOST] [HOST ] 76.524400 s: IPC_OUT_3 : Init done - linkid-0x2000003 [HOST] [HOST ] 76.524492 s: IPC_OUT_4 : Init done - linkid-0x2000004 [HOST] [HOST ] 76.524614 s: IPC_IN_0 : Init done - linkid-0x200000a [HOST] [HOST ] 76.524705 s: IPC_IN_1 : Init done - linkid-0x200000b [HOST] [HOST ] 76.524827 s: IPC_IN_2 : Init done - linkid-0x200000c [HOST] [HOST ] 76.524919 s: IPC_IN_3 : Init done - linkid-0x200000d [HOST] [HOST ] 76.525041 s: IPC_IN_4 : Init done - linkid-0x200000e [HOST] [HOST ] 76.525132 s: IPC_IN_5 : Init done - linkid-0x200000f [HOST] [HOST ] 76.525254 s: IPC_IN_6 : Init done - linkid-0x2000010 [HOST] [HOST ] 76.525346 s: NULL_0 : Init done - linkid-0x2000014 [HOST] [HOST ] 76.525437 s: NULL_1 : Init done - linkid-0x2000015 [HOST] [HOST ] 76.525590 s: NULL_SRC_0 : Init done - linkid-0x2000039 [HOST] [HOST ] 76.525681 s: ALGORITHM_0 : Init done - linkid-0x2000031 [HOST] [HOST ] 76.525773 s: ALGORITHM_1 : Init done - linkid-0x2000032 [HOST] [HOST ] 76.525895 s: ALGORITHM_2 : Init done - linkid-0x2000033 [HOST] [HOST ] 76.526017 s: ALGORITHM_3 : Init done - linkid-0x2000034 [HOST] [HOST ] 76.526108 s: ALGORITHM_4 : Init done - linkid-0x2000035 [HOST] [HOST ] 76.526230 s: ALGORITHM_5 : Init done - linkid-0x2000036 [HOST] [HOST ] 76.526322 s: ALGORITHM_6 : Init done - linkid-0x2000037 [HOST] [HOST ] 76.526444 s: ALGORITHM_7 : Init done - linkid-0x2000038 [HOST] [HOST ] 76.526596 s: DUP0 : Init done - linkid-0x0 [HOST] [HOST ] 76.526779 s: DUP1 : Init done - linkid-0x0 [HOST] [HOST ] 76.526932 s: DUP2 : Init done - linkid-0x0 [HOST] [HOST ] 76.527084 s: DUP3 : Init done - linkid-0x0 [HOST] [HOST ] 76.527298 s: DUP4 : Init done - linkid-0x0 [HOST] [HOST ] 76.527481 s: SYNC_0 : Init done - linkid-0x0 [HOST] [HOST ] 76.527633 s: SYNC_1 : Init done - linkid-0x0 [HOST] [HOST ] 76.527786 s: SYNC_2 : Init done - linkid-0x0 [HOST] [HOST ] 76.527938 s: SYNC_3 : Init done - linkid-0x0 [HOST] [HOST ] 76.528060 s: MERGE_0 : Init done - linkid-0x0 [HOST] [HOST ] 76.528213 s: MERGE_1 : Init done - linkid-0x0 [HOST] [HOST ] 76.528365 s: MERGE_2 : Init done - linkid-0x0 [HOST] [HOST ] 76.528548 s: MERGE_3 : Init done - linkid-0x0 [HOST] [HOST ] 76.528701 s: MERGE_4 : Init done - linkid-0x0 [HOST] [HOST ] 76.528823 s: SELECT_0 : Init done - linkid-0x0 [HOST] [HOST ] 76.528975 s: SELECT_1 : Init done - linkid-0x0 [HOST] [HOST ] 76.529128 s: GATE_0 : Init done - linkid-0x0 [HOST] [HOST ] 76.529250 s: GATE_1 : Init done - linkid-0x0 [HOST] [HOST ] 76.529372 s: GATE_2 : Init done - linkid-0x0 [HOST] [HOST ] 76.529494 s: GATE_3 : Init done - linkid-0x0 [HOST] [HOST ] 76.529646 s: SGXFRMCPY_0 : Init done - linkid-0x2000040 [HOST] [HOST ] 76.529646 s: SYSTEM: Initializing A15 Links ... DONE !!! [HOST] [HOST ] 76.530012 s: OSA: Adjusting global time, timeH by 0 units!!! [HOST] [HOST ] 76.530012 s: SYSTEM: System A15 Init Done !!! [HOST] [HOST ] 76.530165 s: NETWORK_CTRL: Starting Server (port=5000) !!! [HOST] [HOST ] 76.530226 s: NETWORK_CTRL: Starting Server ... DONE (port=5000) !!! [HOST] [IPU2 ] 15.665863 s: [HOST] [IPU2 ] EVE1 Image Load Completed [HOST] [IPU2 ] 15.697767 s: [HOST] [IPU2 ] EVE2 Image Load Completed [HOST] [IPU2 ] 15.729061 s: [HOST] [IPU2 ] EVE3 Image Load Completed [HOST] [IPU2 ] 15.760385 s: [HOST] [IPU2 ] EVE4 Image Load Completed [HOST] [IPU2 ] 15.760507 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.760568 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.760660 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.760751 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.760812 s: ***** IPU2 Firmware build time 21:09:18 Apr 2 2018 [HOST] [IPU2 ] 15.760965 s: *** SYSTEM: CPU Frequency , [HOST] [IPU2 ] 15.764076 s: SYSTEM: System Common Init in progress !!! [HOST] [IPU2 ] 15.775117 s: UTILS: CIO: Init Done !!! [HOST] [IPU2 ] 15.775239 s: SYSTEM: IPC init in progress !!! [HOST] [IPU2 ] 15.775330 s: SYSTEM: Attaching to [DSP1] ... [HOST] [IPU2 ] 15.778076 s: SYSTEM: Attaching to [DSP1] ... SUCCESS !!! [HOST] [IPU2 ] 15.875617 s: SYSTEM: Attaching to [DSP2] ... SUCCESS !!! [HOST] [IPU2 ] 15.893125 s: SYSTEM: Attaching to [EVE1] ... SUCCESS !!! [HOST] [IPU2 ] 15.913194 s: SYSTEM: Attaching to [EVE2] ... SUCCESS !!! [HOST] [IPU2 ] 15.933172 s: SYSTEM: Attaching to [EVE3] ... SUCCESS !!! [HOST] [IPU2 ] 15.953181 s: SYSTEM: Attaching to [EVE4] ... SUCCESS !!! [HOST] [IPU2 ] 15.953303 s: SYSTEM: Notify register to [DSP1] line 0, event 15... [HOST] [IPU2 ] 15.953455 s: SYSTEM: Notify register to [DSP2] line 0, event 15... [HOST] [IPU2 ] 15.953577 s: SYSTEM: Notify register to [EVE1] line 0, event 15... [HOST] [IPU2 ] 15.953699 s: SYSTEM: Notify register to [EVE2] line 0, event 15... [HOST] [IPU2 ] 15.953821 s: SYSTEM: Notify register to [EVE3] line 0, event 15... [HOST] [IPU2 ] 15.953943 s: SYSTEM: Notify register to [EVE4] line 0, event 15... [HOST] [IPU2 ] 15.954065 s: SYSTEM: Notify init done !!! [HOST] [IPU2 ] 15.955804 s: SYSTEM: MsgQ init done !!! [HOST] [IPU2 ] 15.956749 s: RpmsgInit in progress... [HOST] [IPU2 ] 15.956841 s: Connection established with HLOS, calling rpmsgInit [HOST] [IPU2 ] 15.957451 s: SYSTEM: IPC init DONE !!! [HOST] [IPU2 ] 15.962575 s: SYSTEM: Initializing TIOVX ... [HOST] [IPU2 ] 15.962758 s: VX_ZONE_INIT:Enabled [HOST] [IPU2 ] 15.962880 s: VX_ZONE_ERROR:Enabled [HOST] [IPU2 ] 15.963002 s: VX_ZONE_WARNING:Enabled [HOST] [IPU2 ] 15.966723 s: VX_ZONE_INIT:[tivxInit:48] Initialization Done !!! [HOST] [IPU2 ] 15.966815 s: SYSTEM: Initializing TIOVX ... Done !!! [HOST] [IPU2 ] 15.966876 s: SYSTEM: System Common Init Done !!! [HOST] [IPU2 ] 15.966937 s: SYSTEM: System Init in progress !!! [HOST] [IPU2 ] 15.967028 s: SYSTEM: BSP Common Init in progress !!! [HOST] [IPU2 ] 15.967089 s: SYSTEM: BSP Common Init Done !!! [HOST] [IPU2 ] 15.967150 s: SYSTEM: BSP Platform Init in progress !!! [HOST] [IPU2 ] 15.967699 s: SYSTEM: BSP Platform Init Done !!! [HOST] [IPU2 ] 15.967760 s: SYSTEM: FVID2 Init in progress !!! [HOST] [IPU2 ] 15.967913 s: SYSTEM: FVID2 Init Done !!! [HOST] [IPU2 ] 15.967974 s: SYSTEM: VPS Init in progress !!! [HOST] [IPU2 ] 15.968035 s: SYSTEM: VPDMA Descriptor Memory Address translation ENABLED [0x80000000 -> 0x80000000] [HOST] [IPU2 ] 15.971146 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.971268 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.971359 s: VPDMA Load Address = 0x4897d004 [HOST] [IPU2 ] 15.971512 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.971603 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.971695 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.972061 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.972152 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.972213 s: VPDMA Load Address = 0x4899d004 [HOST] [IPU2 ] 15.972335 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.972457 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.972518 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.972884 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.972976 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.973067 s: VPDMA Load Address = 0x489bd004 [HOST] [IPU2 ] 15.973159 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.973250 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.973342 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 15.973708 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 15.973799 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 15.973891 s: VPDMA Load Address = 0x489dd004 [HOST] [IPU2 ] 15.974013 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 15.974074 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 15.974165 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 16.033825 s: SYSTEM: VPS Init Done !!! [HOST] [IPU2 ] 16.034770 s: UTILS: DMA: HWI Create for INT25 !!! [HOST] [IPU2 ] 16.035014 s: SYSTEM: SW Message Box Msg Pool, Free Msg Count = 1024 [HOST] [IPU2 ] 16.035106 s: SYSTEM: Heap = LOCAL_DDR @ 0x00000000, Total size = 262144 B (256 KB), Free size = 253744 B (247 KB) [HOST] [IPU2 ] 16.035289 s: SYSTEM: Heap = SR_OCMC @ 0x00000000, Total size = 0 B (0 KB), Free size = 0 B (0 KB) [HOST] [IPU2 ] 16.035472 s: SYSTEM: Heap = SR_DDR_CACHED @ 0x84203000, Total size = 262144000 B (250 MB), Free size = 262144000 B (250 MB) [HOST] [IPU2 ] 16.035685 s: SYSTEM: Heap = SR_DDR_NON_CACHED @ 0xa0100000, Total size = 1045376 B (0 MB), Free size = 851840 B (0 MB) [HOST] [IPU2 ] 16.035838 s: SYSTEM: Initializing Links !!! [HOST] [IPU2 ] 16.298145 s: SYSTEM: Initializing Links ... DONE !!! [HOST] [IPU2 ] 16.381687 s: CHAINS: Application Started !!! [HOST] [IPU2 ] 16.391966 s: BOARD: Board Init in progress !!! [HOST] [IPU2 ] 16.392515 s: BOARD: Board Init Done !!! [HOST] [IPU2 ] 16.400536 s: [HOST] [HOST ] 77.081010 s: [HOST] [HOST ] [HOST] [HOST ] ==================== [HOST] [HOST ] Vision SDK Usecases [HOST] [HOST ] ==================== [HOST] [HOST ] 1: Single Camera Usecases [HOST] [HOST ] 2: Multi-Camera LVDS Usecases [HOST] [HOST ] 3: Open-Compute Usecases [HOST] [HOST ] [HOST] [HOST ] p: CPU Status [HOST] [HOST ] i: Show IP Addr (IPU + NDK + AVB) [HOST] [HOST ] [HOST] [HOST ] s: System Settings [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] z: Exit - AND SHUTDOWN Remote CPUs [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] x [HOST] [HOST ] 84.200817 s: SYSTEM: System A15 De-Init in progress !!! [HOST] [HOST ] 84.200847 s: SYSTEM: De-Initializing A15 Links !!! [HOST] [HOST ] 84.200969 s: IPC_OUT_0 : DeInit done - linkid-0x2000000 [HOST] [HOST ] 84.201061 s: IPC_OUT_1 : DeInit done - linkid-0x2000001 [HOST] [HOST ] 84.201152 s: IPC_OUT_2 : DeInit done - linkid-0x2000002 [HOST] [HOST ] 84.201244 s: IPC_OUT_3 : DeInit done - linkid-0x2000003 [HOST] [HOST ] 84.201396 s: IPC_OUT_4 : DeInit done - linkid-0x2000004 [HOST] [HOST ] 84.201518 s: IPC_IN_0 : DeInit done - linkid-0x200000a [HOST] [HOST ] 84.201640 s: IPC_IN_1 : DeInit done - linkid-0x200000b [HOST] [HOST ] 84.201762 s: IPC_IN_2 : DeInit done - linkid-0x200000c [HOST] [HOST ] 84.201915 s: IPC_IN_3 : DeInit done - linkid-0x200000d [HOST] [HOST ] 84.202037 s: IPC_IN_4 : DeInit done - linkid-0x200000e [HOST] [HOST ] 84.202159 s: IPC_IN_5 : DeInit done - linkid-0x200000f [HOST] [HOST ] 84.202250 s: IPC_IN_6 : DeInit done - linkid-0x2000010 [HOST] [HOST ] 84.202403 s: NULL_0 : DeInit done - linkid-0x2000014 [HOST] [HOST ] 84.202525 s: NULL_1 : DeInit done - linkid-0x2000015 [HOST] [HOST ] 84.202647 s: NULL_SRC_0 : DeInit done - linkid-0x2000039 [HOST] [HOST ] 84.202738 s: ALGORITHM_0 : DeInit done - linkid-0x2000031 [HOST] [HOST ] 84.202830 s: ALGORITHM_1 : DeInit done - linkid-0x2000032 [HOST] [HOST ] 84.202921 s: ALGORITHM_2 : DeInit done - linkid-0x2000033 [HOST] [HOST ] 84.203013 s: ALGORITHM_3 : DeInit done - linkid-0x2000034 [HOST] [HOST ] 84.203104 s: ALGORITHM_4 : DeInit done - linkid-0x2000035 [HOST] [HOST ] 84.203165 s: ALGORITHM_5 : DeInit done - linkid-0x2000036 [HOST] [HOST ] 84.203257 s: ALGORITHM_6 : DeInit done - linkid-0x2000037 [HOST] [HOST ] 84.203348 s: ALGORITHM_7 : DeInit done - linkid-0x2000038 [HOST] [HOST ] 84.203470 s: DUP0 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.203592 s: DUP1 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.203715 s: DUP2 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.203837 s: DUP3 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204081 s: DUP4 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204203 s: SYNC_0 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204325 s: SYNC_1 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204416 s: SYNC_2 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204538 s: SYNC_3 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204660 s: MERGE_0 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204782 s: MERGE_1 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204904 s: MERGE_2 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.204996 s: MERGE_3 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205118 s: MERGE_4 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205240 s: SELECT_0 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205362 s: SELECT_1 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205453 s: GATE_0 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205575 s: GATE_1 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205697 s: GATE_2 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.205819 s: GATE_3 : DeInit done - linkid-0x0 [HOST] [HOST ] 84.206795 s: SGXFRMCPY_0 : DeInit done - linkid-0x2000040 [HOST] [HOST ] 84.206826 s: SYSTEM: De-Initializing A15 Links ... DONE !!! [HOST] [HOST ] 84.206826 s: SYSTEM: IPC: De-init in progress !!! [HOST] [HOST ] 84.206826 s: SYSTEM: MSGQ: MsgQ de-init in progress !!! [HOST] [HOST ] 84.206978 s: SYSTEM: MSGQ: MsgQ de-init DONE !!! [HOST] [HOST ] 84.206978 s: SYSTEM: IPC: Notify de-init in progress !!! [HOST] [HOST ] 84.207283 s: SYSTEM: IPC: Notify de-init DONE !!! [HOST] [HOST ] 84.207314 s: SYSTEM: IPC: De-init DONE !!! [HOST] [HOST ] 84.207314 s: SYSTEM: System A15 De-Init Done !!! CMEM Error: registerAlloc: ioctl CMEM_IOCREGUSER failed for phys addr 0xa9000000: -1 TIOCL FATAL: The TI Multicore Tools daemon (/usr/bin/ti-mctd) is not running. Re-run application after starting the daemon. Refer User Guide for details. ./start.sh: line 6: 1014 Aborted (core dumped) ./apps.out root@dra7xx-evm:~# Hi Surya, I add "./load_ocl_kos.sh" before "source ./vision_sdk_load.sh" and try , Above is my new log. Regards, Xie Baojian Hi Xie Baojian, It seems below files are not build or copied to /opt/vision_sdk folder properly insmod: ERROR: could not load module /opt/vision_sdk/debugss_kmodule.ko: No such file or directory insmod: ERROR: could not load module /opt/vision_sdk/gdbserverproxy.ko: No such file or directory We need to build once again Before building let us check We have everything correctly configured 1. MAKECONFIG = tda2xx_evm_linux_opencx 2. We cloned kernel,u-boot,sgx,cmem,dsptop,gdbc6x 3. filesystem downloaded & placed under targetfs folder & permission of targetfs changed to 777 4. filesystem patches under kernel\linux_kernel_addon\fs_patches are applied to filesystem 5. ti-cgt-c6000_8.1.0 is downloaded & kept under ti_components\cg_tools\linux folder 6. "ti-cgt-c6000_8.1.0\bin" path is added to system path variable Run below commands from vision_sdk\ build folder rm -rf ../binaries make clean make linux_clean make linux make linux_install make -s -j depend make -s -j opencx Build should be success without any errors Regards Surya Hi Surya, I checked all of above steps, But my only uncertainty is cloned cmem. I refer to the documentation， but the documentation is not detailed about clone cmem. Can you tell me in detail of clone cmem steps? Regards, Xie Baojian Hi Xie Baojian, Refer Linux User guide section 2.4.2.1.1 Clone kernel, After cloning OMAP, below there is procedure mentioned to clone cmem (from ludev.git) Regards Surya Hi Surya, I have finished following the steps above without any errors. But it still no effect, Below is my entire run log. Regards, Xie Baojian log6.txt OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 165 bytes read in 3 ms (53.7 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3552144 bytes read in 89 ms (38.1 MiB/s) 106665 bytes read in 28 ms (3.6 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x363390 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff0a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00018-gd326d64 (htf@ubuntu) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Apr 2 20:16:47 CST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=2ca9f500-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 410844K/979968K available (6619K kernel code, 319K rwdata, 2388K rodata, 340K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d402c (9009 kB) [ 0.000000] .init : 0xc08d5000 - 0xc092a000 ( 340 kB) [ 0.000000] .data : 0xc092a000 - 0xc0979d60 ( 320 kB) [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000332] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000340] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000772] Console: colour dummy device 80x30 [ 0.000787] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000793] This ensures that you still see kernel messages. Please [ 0.000798] update your kernel commandline. [ 0.000812] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000825] pid_max: default: 32768 minimum: 301 [ 0.000920] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000930] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001471] Initializing cgroup subsys io [ 0.001488] Initializing cgroup subsys memory [ 0.001512] Initializing cgroup subsys devices [ 0.001525] Initializing cgroup subsys freezer [ 0.001536] Initializing cgroup subsys perf_event [ 0.001547] Initializing cgroup subsys pids [ 0.001574] CPU: Testing write buffer coherency: ok [ 0.001775] /cpus/cpu@0 missing clock-frequency property [ 0.001791] /cpus/cpu@1 missing clock-frequency property [ 0.001801] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001834] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080051] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080119] Brought up 2 CPUs [ 0.080132] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080139] CPU: All CPU(s) started in HYP mode. [ 0.080144] CPU: Virtualization extensions available. [ 0.080525] devtmpfs: initialized [ 0.109001] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.109984] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.314461] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.314480] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.318706] pinctrl core: initialized pinctrl subsystem [ 0.319558] NET: Registered protocol family 16 [ 0.320510] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.350237] cpuidle: using governor ladder [ 0.380259] cpuidle: using governor menu [ 0.388733] OMAP GPIO hardware version 0.1 [ 0.395120] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.411132] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.411145] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.420429] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.420439] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.420903] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.420913] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.421502] OMAP DMA hardware revision 0.0 [ 0.461426] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.462589] edma 43300000.edma: memcpy is disabled [ 0.467231] edma 43300000.edma: TI EDMA DMA engine driver [ 0.471652] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.471838] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.471997] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.472152] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.472442] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.472626] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.475630] palmas 0-0058: IRQ missing: skipping irq request [ 0.491073] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.563394] pcf857x 0-0020: probed [ 0.563950] pcf857x 0-0021: probed [ 0.564099] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.564485] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.564691] media: Linux media interface: v0.10 [ 0.564742] Linux video capture interface: v2.00 [ 0.564786] pps_core: LinuxPPS API ver. 1 registered [ 0.564793] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.564817] PTP clock support registered [ 0.564863] EDAC MC: Ver: 3.0.0 [ 0.565608] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.565908] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.566236] Advanced Linux Sound Architecture Driver Initialized. [ 0.567068] clocksource: Switched to clocksource arch_sys_counter [ 0.577682] NET: Registered protocol family 2 [ 0.578179] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.578242] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.578367] TCP: Hash tables configured (established 8192 bind 8192) [ 0.578414] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.578445] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.578654] NET: Registered protocol family 1 [ 0.578927] RPC: Registered named UNIX socket transport module. [ 0.578937] RPC: Registered udp transport module. [ 0.578943] RPC: Registered tcp transport module. [ 0.578950] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.579939] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.589892] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.590545] NFS: Registering the id_resolver key type [ 0.590571] Key type id_resolver registered [ 0.590579] Key type id_legacy registered [ 0.590631] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.591897] bounce: pool size: 64 pages [ 0.592047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.592062] io scheduler noop registered [ 0.592073] io scheduler deadline registered [ 0.592105] io scheduler cfq registered (default) [ 0.597012] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.600249] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.600262] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.600295] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.600316] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.630589] dra7-pcie 51000000.pcie_rc: link is not up [ 0.630765] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.630778] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.630788] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.630797] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.631200] PCI: bus0: Fast back to back transfers disabled [ 0.631321] PCI: bus1: Fast back to back transfers enabled [ 0.631404] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.631418] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.631431] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.631648] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.691910] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.695300] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.703675] console [ttyS0] enabled [ 1.708078] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.717777] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.727804] [drm] Initialized drm 1.1.0 20060810 [ 1.733822] OMAP DSS rev 6.1 [ 1.737589] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.753169] loop: module loaded [ 1.756688] vmemexp device MAJOR num = 246 [ 1.760835] vmemexp class registered [ 1.764546] /dev/vmemexp device registered [ 1.768681] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.774348] nand: No NAND device found [ 1.778141] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.788079] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.793473] 7 ofpart partitions found on MTD device spi32766.0 [ 1.799355] Creating 7 MTD partitions on "spi32766.0": [ 1.804518] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.810638] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.816971] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.823930] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.830633] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.838031] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.844382] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.852173] libphy: Fixed MDIO Bus: probed [ 1.907100] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.913225] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.923793] libphy: 48485000.mdio: probed [ 1.927842] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.935883] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.944582] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6 [ 1.951243] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.958227] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7 [ 1.966827] mousedev: PS/2 mouse device common for all mice [ 1.973023] i2c /dev entries driver [ 1.981749] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.987328] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.993713] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.000247] evm_3v3_sw: supplied by sysen1 [ 2.080850] mmc0: MAN_BKOPS_EN bit is not set [ 2.117621] mmc0: new HS200 MMC card at address 0001 [ 2.123055] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.127826] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.133983] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.168910] ledtrig-cpu: registered to indicate activity on CPUs [ 2.177418] aic_dvdd: supplied by evm_3v3_sw [ 2.183290] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.190822] NET: Registered protocol family 10 [ 2.206079] sit: IPv6 over IPv4 tunneling driver [ 2.211287] NET: Registered protocol family 17 [ 2.215964] Key type dns_resolver registered [ 2.220410] omap_voltage_late_init: Voltage driver support not added [ 2.227315] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.233523] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.240281] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.246491] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.254717] Power Management for TI OMAP4+ devices. [ 2.259823] Registering SWP/SWPB emulation handler [ 2.266660] dmm 4e000000.dmm: initialized all PAT entries [ 2.274048] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280718] [drm] No driver support for vblank timestamp query. [ 2.287007] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.293869] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.338404] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.351517] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.360442] hctosys: unable to open rtc device (rtc0) [ 2.376786] evm_1v8: disabling [ 2.379884] aic_dvdd: disabling [ 2.383037] vmmcwl_fixed: disabling [ 2.386702] ldousb: disabling [ 2.390138] ALSA device list: [ 2.393127] #0: DRA7xx-EVM [ 2.396666] Waiting for root device PARTUUID=2ca9f500-02... [ 2.616492] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.631675] mmc2: new ultra high speed DDR50 SDHC card at address aaaa [ 2.648685] mmcblk1: mmc2:aaaa SS08G 7.40 GiB [ 2.658363] mmcblk1: p1 p2 [ 2.730376] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.741894] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 2.965756] EXT4-fs (mmcblk1p2): recovery complete [ 2.971371] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.979539] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 2.989120] devtmpfs: mounted [ 2.992292] Freeing unused kernel memory: 340K [ 2.996754] This architecture does not have kernel memory protection. [ 3.122391] systemd[1]: System time before build time, advancing clock. [ 3.156049] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.172128] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 3.183475] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.201938] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 3.230938] systemd[1]: Set hostname to . [ 3.289140] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.299405] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.315614] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.343105] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.359031] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.437436] random: systemd: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.446899] random: systemd: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.456762] random: systemd: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 3.789318] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 3.797130] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 3.804824] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 3.812138] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 3.819589] systemd[1]: sysinit.target: Found dependency on avahi-daemon.socket/start [ 3.827475] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 3.834906] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 3.844362] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 3.879555] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.907439] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.948000] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.978274] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.007259] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.027288] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.047407] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.078456] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.107311] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.137239] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.157322] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.187349] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.217788] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.247901] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.277820] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.307260] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.327365] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.377484] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.409447] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.442862] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.480440] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.499093] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 4.514793] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.539878] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.569882] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.609498] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.643465] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.667415] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.687318] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 4.707492] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 5.364635] systemd-journald[122]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 5.808826] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 Starting Load/Save Random Seed... [ OK ] Started udev Coldplug all Devices.[ 5.846483] remoteproc0: 55020000.ipu is available [ 5.855728] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 5.866818] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.883672] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 5.894926] remoteproc1: 40800000.dsp is available [ OK ] Started Create Volatile Files and Directories. [ 5.903241] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.923846] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Load/Save Random Seed. [ 5.969192] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 5.996290] remoteproc2: 41000000.dsp is available [ 6.013563] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 6.049756] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Found device /dev/ttyS0. Starting Network Time Synchronization... [ 6.204735] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Network Time Synchronization. [ 6.341953] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [ OK ] Reached target System Time Synchronized. Starting Synchronize System and HW clocks... [ 6.455029] remoteproc1: registered virtio0 (type 7) [ OK ] Started Update UTMP about System Boot/Shutdown.[ 6.498415] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Started Synchronize System and HW clocks. [ 6.581170] remoteproc0: registered virtio1 (type 7) [ 6.604767] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Reached target System Initialization. [ 6.628497] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ 6.685025] CAN device driver interface [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 6.748498] SCSI subsystem initialized [ 6.771116] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=358) [ 6.931094] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ OK ] Listening on dropbear.socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ 7.014744] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Reached target Basic System. [ 7.067478] remoteproc2: registered virtio2 (type 7) Starting Login Service... Starting Telephony service... Starting Print notice about GPLv3 packages... [ 7.151779] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.174889] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Started Kernel Logging Service. Starting Permit User Sessions... [ OK ] Started System Logging Service. Starting Avahi mDNS/DNS-SD Stack... Starting TI MultiCore Tools Daemon... [ OK ] Started D-Bus System Message Bus. [ 7.254080] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 7.335187] scsi host0: ahci [ 7.338977] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 342 [ OK ] Started Telephony service. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Network Service... Starting uim-sysfs.service... Starting Save/Restore Sound Card State... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started Permit User Sessions. [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ 7.727099] ata1: SATA link down (SStatus 0 SControl 300) [ 7.735828] Bluetooth: Core ver 2.21 [ 7.755442] NET: Registered protocol family 31 [ 7.813841] Bluetooth: HCI device and connection manager initialized [ 7.859689] net eth1: initializing cpsw version 1.15 (0) [ OK ] Started Network Service. [ OK ] Started Save/Restore Sound Card State. [ 7.906771] Bluetooth: HCI socket layer initialized [ 7.917571] net eth0: initialized cpsw ale version 1.4 [ 7.932446] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.942489] Bluetooth: L2CAP socket layer initialized [ 7.948497] net eth0: ALE Table size 1024 [ 7.956937] Bluetooth: SCO socket layer initialized [ 7.984026] net eth1: phy found : id is : 0x20005c7a [ 8.023969] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.049712] net eth0: initializing cpsw version 1.15 (0) [ 8.109105] net eth0: phy found : id is : 0x20005c7a [ 8.124432] NET: Registered protocol family 15 [ 8.149678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.314213] random: nonblocking pool is initialized [ 8.391195] Initializing XFRM netlink socket [ 8.514036] remoteproc1: powering up 40800000.dsp [ 8.563120] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 7449552 [ 8.594757] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 8.600655] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 8.606599] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 8.767210] remoteproc1: remote processor 40800000.dsp is now up [ 8.783919] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.800599] remoteproc0: powering up 55020000.ipu [ 8.839120] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 9507952 [ 8.846115] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 8.934252] remoteproc0: remote processor 55020000.ipu is now up [ 8.956001] virtio_rpmsg_bus virtio1: rpmsg host is online [ 8.983169] remoteproc2: powering up 41000000.dsp [ 9.032672] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 7449552 [ 9.064805] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 9.070694] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 9.076634] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 9.218541] remoteproc2: remote processor 41000000.dsp is now up [ 9.244929] virtio_rpmsg_bus virtio2: rpmsg host is online [ 9.301552] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [ 9.313550] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 9.329871] NET: Registered protocol family 41 [ 9.338706] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [ 9.522593] usbcore: registered new interface driver usbfs [ 9.534571] usbcore: registered new interface driver hub [ 9.546897] usbcore: registered new device driver usb [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ OK ] Reached target Network. [ 9.600242] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Getty on tty1. [[ 9.618181] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered OK ] Started Serial Getty on ttyS0. [ 9.631898] dwc3 48890000.usb: otg: can't start till gadget registers [ 9.655073] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.655095] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 9.655422] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 9.655463] xhci-hcd xhci-hcd.1.auto: irq 500, io mem 0x488d0000 [ 9.661125] hub 1-0:1.0: USB hub found [ 9.661152] hub 1-0:1.0: 1 port detected [ 9.661454] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.661464] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 9.661523] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.665158] hub 2-0:1.0: USB hub found [ 9.665186] hub 2-0:1.0: 1 port detected [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ OK ] Started Login Service. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 10.074190] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 10.114809] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 10.131642] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting tiipclad-daemon.service... Starting telnetd.service... [ OK ] Started telnetd.service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: [ OK ] Started tiipclad-daemon.service. autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** Starting thttpd.service... [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# ./start.sh Opened log file: lad.txt numProcessors = 5 id = 0 baseId = 0 Spawned daemon: /usr/bin/lad_dra7xx [ 23.992447] CMEMK module: reference Linux version 4.4.84 [ 24.000338] allocated heap buffer 0x40400000 of size 0x100000 [ 24.006324] cmemk initialized insmod: ERROR: could not load module /opt/vision_sdk/debugss_kmodule.ko: No such file or directory insmod: ERROR: could not load module /opt/vision_sdk/gdbserverproxy.ko: No such file or directory [ 24.050475] DMA: Module install successful, device major num = 242 [ 24.056913] DRV: Module install successful insmod: ERROR: could not insert module ./bin/cmemk.ko: File exists ./disableDssInterruptsOnA15.sh: line 11: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 12: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 13: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 14: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 15: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 16: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 17: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 18: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 19: @0x4A002AC4:: command not found updated 0x4A002AC4 value is 00930000 [HOST] OSA: MEM: 0: Mapped 0xa0100000 to 0xb65df000 of size 0x00100000 [HOST] OSA: MEM: 1: Mapped 0x84203000 to 0xa6bdf000 of size 0x0fa00000 [HOST] OSA: MEM: 2: Mapped 0xa0200000 to 0xa6b1f000 of size 0x00040000 [HOST] OSA: MEM: 3: Mapped 0xa02c0000 to 0xa6b5f000 of size 0x00080000 [HOST] OSA: MEM: 4: Mapped 0x00000000 to 0x00000000 of size 0x00000000 [HOST] OSA: HOST Remote Log Shared Memory @ 0xa024f140 [HOST] OSA: IPU2 Remote Log Shared Memory @ 0xa0363da0 24.311229] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) [ 24.353212] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) [ HOST] [HOST ] 31.025224 s: SYSTEM: System A15 Init in proress !!! [HOST] [HOST ] 31.025315 s: SYSTEM: IPC: Init in progress !!! [HOST] [HOST ] 31.025346 s: SYSTEM: IPC: Notify init in progress !!! [HOST] [HOST ] 31.025590 s: SYSTEM: IPC: [IPU2] socket bind success !!! (dst vproc = 1, endpt = 81) [HOST] [HOST ] 31.025590 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 81) !!! [HOST] [HOST ] 31.025620 s: SYSTEM: IPC: [IPU2] socket connect success !!! (dst vproc = 1, endpt = 80) [HOST] [HOST ] 31.025651 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 1024) !!! [HOST] [HOST ] 31.025742 s: SYSTEM: IPC: Notify init DONE !!! [HOST] [HOST ] 31.025742 s: SYSTEM: MSGQ: MsgQ init in progress !!! [HOST] [HOST ] 31.025864 s: SYSTEM: MSGQ: MsgQ init DONE !!! [HOST] [HOST ] 31.025864 s: SYSTEM: IPC: Init DONE !!! [HOST] [HOST ] 31.025864 s: SYSTEM: Initializing A15 Links !!! [HOST] [HOST ] 31.025986 s: IPC_OUT_0 : Init done - linkid-0x2000000 [HOST] [HOST ] 31.026078 s: IPC_OUT_1 : Init done - linkid-0x2000001 [HOST] [HOST ] 31.026169 s: IPC_OUT_2 : Init done - linkid-0x2000002 [HOST] [HOST ] 31.026261 s: IPC_OUT_3 : Init done - linkid-0x2000003 [HOST] [HOST ] 31.026383 s: IPC_OUT_4 : Init done - linkid-0x2000004 [HOST] [HOST ] 31.026535 s: IPC_IN_0 : Init done - linkid-0x200000a [HOST] [HOST ] 31.026688 s: IPC_IN_1 : Init done - linkid-0x200000b [HOST] [HOST ] 31.026840 s: IPC_IN_2 : Init done - linkid-0x200000c [HOST] [HOST ] 31.026993 s: IPC_IN_3 : Init done - linkid-0x200000d [HOST] [HOST ] 31.027145 s: IPC_IN_4 : Init done - linkid-0x200000e [HOST] [HOST ] 31.027298 s: IPC_IN_5 : Init done - linkid-0x200000f [HOST] [HOST ] 31.027420 s: IPC_IN_6 : Init done - linkid-0x2000010 [HOST] [HOST ] 31.027572 s: NULL_0 : Init done - linkid-0x2000014 [HOST] [HOST ] 31.027694 s: NULL_1 : Init done - linkid-0x2000015 [HOST] [HOST ] 31.027847 s: NULL_SRC_0 : Init done - linkid-0x2000039 [HOST] [HOST ] 31.027999 s: ALGORITHM_0 : Init done - linkid-0x2000031 [HOST] [HOST ] 31.028121 s: ALGORITHM_1 : Init done - linkid-0x2000032 [HOST] [HOST ] 31.028243 s: ALGORITHM_2 : Init done - linkid-0x2000033 [HOST] [HOST ] 31.028365 s: ALGORITHM_3 : Init done - linkid-0x2000034 [HOST] [HOST ] 31.028487 s: ALGORITHM_4 : Init done - linkid-0x2000035 [HOST] [HOST ] 31.028640 s: ALGORITHM_5 : Init done - linkid-0x2000036 [HOST] [HOST ] 31.028762 s: ALGORITHM_6 : Init done - linkid-0x2000037 [HOST] [HOST ] 31.028914 s: ALGORITHM_7 : Init done - linkid-0x2000038 [HOST] [HOST ] 31.029097 s: DUP0 : Init done - linkid-0x0 [HOST] [HOST ] 31.029280 s: DUP1 : Init done - linkid-0x0 [HOST] [HOST ] 31.029463 s: DUP2 : Init done - linkid-0x0 [HOST] [HOST ] 31.029646 s: DUP3 : Init done - linkid-0x0 [HOST] [HOST ] 31.029860 s: DUP4 : Init done - linkid-0x0 [HOST] [HOST ] 31.029951 s: SYNC_0 : Init done - linkid-0x0 [HOST] [HOST ] 31.030104 s: SYNC_1 : Init done - linkid-0x0 [HOST] [HOST ] 31.030195 s: SYNC_2 : Init done - linkid-0x0 [HOST] [HOST ] 31.030317 s: SYNC_3 : Init done - linkid-0x0 [HOST] [HOST ] 31.030439 s: MERGE_0 : Init done - linkid-0x0 [HOST] [HOST ] 31.030561 s: MERGE_1 : Init done - linkid-0x0 [HOST] [HOST ] 31.030653 s: MERGE_2 : Init done - linkid-0x0 [HOST] [HOST ] 31.030744 s: MERGE_3 : Init done - linkid-0x0 [HOST] [HOST ] 31.030866 s: MERGE_4 : Init done - linkid-0x0 [HOST] [HOST ] 31.030988 s: SELECT_0 : Init done - linkid-0x0 [HOST] [HOST ] 31.031080 s: SELECT_1 : Init done - linkid-0x0 [HOST] [HOST ] 31.031202 s: GATE_0 : Init done - linkid-0x0 [HOST] [HOST ] 31.031263 s: GATE_1 : Init done - linkid-0x0 [HOST] [HOST ] 31.031385 s: GATE_2 : Init done - linkid-0x0 [HOST] [HOST ] 31.031476 s: GATE_3 : Init done - linkid-0x0 [HOST] [HOST ] 31.031568 s: SGXFRMCPY_0 : Init done - linkid-0x2000040 [HOST] [HOST ] 31.031568 s: SYSTEM: Initializing A15 Links ... DONE !!! [HOST] [HOST ] 31.031934 s: OSA: Adjusting global time, timeH by 0 units!!! [HOST] [HOST ] 31.031934 s: SYSTEM: System A15 Init Done !!! [HOST] [HOST ] 31.032086 s: NETWORK_CTRL: Starting Server (port=5000) !!! [HOST] [HOST ] 31.032147 s: NETWORK_CTRL: Starting Server ... DONE (port=5000) !!! [HOST] [IPU2 ] 15.722686 s: [HOST] [IPU2 ] EVE1 Image Load Completed [HOST] [IPU2 ] 15.754620 s: [HOST] [IPU2 ] EVE2 Image Load Completed [HOST] [IPU2 ] 15.785853 s: [HOST] [IPU2 ] EVE3 Image Load Completed [HOST] [IPU2 ] 15.817025 s: [HOST] [IPU2 ] EVE4 Image Load Completed [HOST] [IPU2 ] 15.817147 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.817208 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.817300 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.817391 s: [HOST] [IPU2 ] EVE MMU configuration completed [HOST] [IPU2 ] 15.817452 s: ***** IPU2 Firmware build time 21:09:18 Apr 2 2018 [HOST] [IPU2 ] 15.817605 s: *** SYSTEM: CPU Frequency , [HOST] [IPU2 ] 15.820716 s: SYSTEM: System Common Init in progress !!! [HOST] [IPU2 ] 15.831757 s: UTILS: CIO: Init Done !!! [HOST] [IPU2 ] 15.831879 s: SYSTEM: IPC init in progress !!! [HOST] [IPU2 ] 15.831970 s: SYSTEM: Attaching to [DSP1] ... [HOST] [IPU2 ] 15.835082 s: SYSTEM: Attaching to [DSP1] ... SUCCESS !!! [HOST] [IPU2 ] 15.944396 s: SYSTEM: Attaching to [DSP2] ... SUCCESS !!! [HOST] [IPU2 ] 15.959372 s: SYSTEM: Attaching to [EVE1] ... SUCCESS !!! [HOST] [IPU2 ] 15.979411 s: SYSTEM: Attaching to [EVE2] ... SUCCESS !!! [HOST] [IPU2 ] 15.999389 s: SYSTEM: Attaching to [EVE3] ... SUCCESS !!! [HOST] [IPU2 ] 16.019429 s: SYSTEM: Attaching to [EVE4] ... SUCCESS !!! [HOST] [IPU2 ] 16.019551 s: SYSTEM: Notify register to [DSP1] line 0, event 15... [HOST] [IPU2 ] 16.019673 s: SYSTEM: Notify register to [DSP2] line 0, event 15... [HOST] [IPU2 ] 16.019795 s: SYSTEM: Notify register to [EVE1] line 0, event 15... [HOST] [IPU2 ] 16.019917 s: SYSTEM: Notify register to [EVE2] line 0, event 15... [HOST] [IPU2 ] 16.020069 s: SYSTEM: Notify register to [EVE3] line 0, event 15... [HOST] [IPU2 ] 16.020222 s: SYSTEM: Notify register to [EVE4] line 0, event 15... [HOST] [IPU2 ] 16.020344 s: SYSTEM: Notify init done !!! [HOST] [IPU2 ] 16.022082 s: SYSTEM: MsgQ init done !!! [HOST] [IPU2 ] 16.022967 s: RpmsgInit in progress... [HOST] [IPU2 ] 16.023089 s: Connection established with HLOS, calling rpmsgInit [HOST] [IPU2 ] 16.023699 s: SYSTEM: IPC init DONE !!! [HOST] [IPU2 ] 16.028823 s: SYSTEM: Initializing TIOVX ... [HOST] [IPU2 ] 16.029006 s: VX_ZONE_INIT:Enabled [HOST] [IPU2 ] 16.029158 s: VX_ZONE_ERROR:Enabled [HOST] [IPU2 ] 16.029311 s: VX_ZONE_WARNING:Enabled [HOST] [IPU2 ] 16.032940 s: VX_ZONE_INIT:[tivxInit:48] Initialization Done !!! [HOST] [IPU2 ] 16.033093 s: SYSTEM: Initializing TIOVX ... Done !!! [HOST] [IPU2 ] 16.033154 s: SYSTEM: System Common Init Done !!! [HOST] [IPU2 ] 16.033215 s: SYSTEM: System Init in progress !!! [HOST] [IPU2 ] 16.033306 s: SYSTEM: BSP Common Init in progress !!! [HOST] [IPU2 ] 16.033367 s: SYSTEM: BSP Common Init Done !!! [HOST] [IPU2 ] 16.033428 s: SYSTEM: BSP Platform Init in progress !!! [HOST] [IPU2 ] 16.033855 s: SYSTEM: BSP Platform Init Done !!! [HOST] [IPU2 ] 16.033916 s: SYSTEM: FVID2 Init in progress !!! [HOST] [IPU2 ] 16.034099 s: SYSTEM: FVID2 Init Done !!! [HOST] [IPU2 ] 16.034160 s: SYSTEM: VPS Init in progress !!! [HOST] [IPU2 ] 16.034221 s: SYSTEM: VPDMA Descriptor Memory Address translation ENABLED [0x80000000 -> 0x80000000] [HOST] [IPU2 ] 16.037302 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 16.037424 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 16.037516 s: VPDMA Load Address = 0x4897d004 [HOST] [IPU2 ] 16.037607 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 16.037699 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 16.037790 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 16.038187 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 16.038278 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 16.038370 s: VPDMA Load Address = 0x4899d004 [HOST] [IPU2 ] 16.038461 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 16.038553 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 16.038644 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 16.038980 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 16.039102 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 16.039193 s: VPDMA Load Address = 0x489bd004 [HOST] [IPU2 ] 16.039285 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 16.039376 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 16.039468 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 16.039803 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 16.039895 s: VPDMA Firmware Address = 0xa035ba40 [HOST] [IPU2 ] 16.039986 s: VPDMA Load Address = 0x489dd004 [HOST] [IPU2 ] 16.040108 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 16.040200 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 16.040291 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 16.099951 s: SYSTEM: VPS Init Done !!! [HOST] [IPU2 ] 16.100866 s: UTILS: DMA: HWI Create for INT25 !!! [HOST] [IPU2 ] 16.101201 s: SYSTEM: SW Message Box Msg Pool, Free Msg Count = 1024 [HOST] [IPU2 ] 16.101293 s: SYSTEM: Heap = LOCAL_DDR @ 0x00000000, Total size = 262144 B (256 KB), Free size = 253744 B (247 KB) [HOST] [IPU2 ] 16.101476 s: SYSTEM: Heap = SR_OCMC @ 0x00000000, Total size = 0 B (0 KB), Free size = 0 B (0 KB) [HOST] [IPU2 ] 16.101628 s: SYSTEM: Heap = SR_DDR_CACHED @ 0x84203000, Total size = 262144000 B (250 MB), Free size = 262144000 B (250 MB) [HOST] [IPU2 ] 16.101811 s: SYSTEM: Heap = SR_DDR_NON_CACHED @ 0xa0100000, Total size = 1045376 B (0 MB), Free size = 851840 B (0 MB) [HOST] [IPU2 ] 16.101964 s: SYSTEM: Initializing Links !!! [HOST] [IPU2 ] 16.365155 s: SYSTEM: Initializing Links ... DONE !!! [HOST] [IPU2 ] 16.447935 s: CHAINS: Application Started !!! [HOST] [IPU2 ] 16.458274 s: BOARD: Board Init in progress !!! [HOST] [IPU2 ] 16.458732 s: BOARD: Board Init Done !!! [HOST] [IPU2 ] 16.466632 s: [HOST] [HOST ] 31.584639 s: [HOST] [HOST ] [HOST] [HOST ] ==================== [HOST] [HOST ] Vision SDK Usecases [HOST] [HOST ] ==================== [HOST] [HOST ] 1: Single Camera Usecases [HOST] [HOST ] 2: Multi-Camera LVDS Usecases [HOST] [HOST ] 3: Open-Compute Usecases [HOST] [HOST ] [HOST] [HOST ] p: CPU Status [HOST] [HOST ] i: Show IP Addr (IPU + NDK + AVB) [HOST] [HOST ] [HOST] [HOST ] s: System Settings [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] z: Exit - AND SHUTDOWN Remote CPUs [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 3^H [HOST] [HOST ] 43.847373 s: [HOST] [HOST ] [HOST] [HOST ] OpenCompute Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 2: OpenCV Usecases [HOST] [HOST ] 3: OpenCL Usecases [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] [HOST] [HOST ] 43.847404 s: [HOST] [HOST ] 43.847404 s: Unsupported option '. Please try again [HOST] [HOST ] 43.847404 s: [HOST] [HOST ] [HOST] [HOST ] OpenCompute Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 2: OpenCV Usecases [HOST] [HOST ] 3: OpenCL Usecases [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 3 [HOST] [HOST ] 47.871530 s: [HOST] [HOST ] 47.871530 s: [HOST] [HOST ] [HOST] [HOST ] OpenCL Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 1: 1CH VIP capture + OpenCL Copy (A15->DSP) + SGX Copy + DISPLAY [HOST] [HOST ] 4: OpenCL framecopy Usecases [HOST] [HOST ] 5: Chains_openclFrameCopy_DecodeDisplay [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 1 [HOST] [HOST ] 52.783627 s: [HOST] [IPU2 ] 52.783779 s: CHAINS: Sensor create in progress [HOST] [IPU2 ] 52.784542 s: VIDEO_SENSOR: INST0 : I2C1 : I2C Addr = 0x30 [HOST] [IPU2 ] 52.881443 s: VIDEO_SENSOR: VIP 0: DRV ID 1203 (I2C ADDR 0x30): a635:0000:7fa2 [HOST] [IPU2 ] 52.881778 s: CHAINS: Sensor create ... DONE !!! [HOST] [IPU2 ] 52.896663 s: CAPTURE: Create in progress !!! [HOST] [IPU2 ] 52.897059 s: CAPTURE: VIP1 Slice0 PortA capture mode is [ 8-bit] !!! ASSERT (chains_vipSingleCamOpenCLFrameCopySgxDisplay_priv.c|chains_vipSingleCamOpenCLFrameCopySgxDisplay_Create|165) [HOST] [HOST ] 53.019703 s: IPC_IN_0 : Create in progress !!! [HOST] [HOST ] 53.020100 s: IPC_IN_0 : Create Done !!! [HOST] [HOST ] 53.020191 s: ALG: ERROR: No alg create function specified (algId = 6) !!! [HOST] [IPU2 ] 53.018544 s: CAPTURE: Create Done !!! [HOST] [IPU2 ] 53.019032 s: IPC_OUT_0 : Create in progress !!! [HOST] [IPU2 ] 53.019429 s: IPC_OUT_0 : Create Done !!! Hi Xie Baojian, From attached log, I can see the "apps.out" you are using is still the older version (built on Apr 2 2018) [HOST] [IPU2 ] 15.817452 s: ***** IPU2 Firmware build time 21:09:18 Apr 2 2018 [HOST] [IPU2 ] 15.817605 s: *** SYSTEM: CPU Frequency , [HOST] [IPU2 ] 15.820716 s: SYSTEM: System Common Init in progress !!! [HOST] [IPU2 ] 15.831757 s: UTILS: CIO: Init Done !!! [HOST] [IPU2 ] 15.831879 s: SYSTEM: IPC init in progress !!! [HOST] [IPU2 ] 15.831970 s: SYSTEM: Attaching to [DSP1] ... [HOST] [IPU2 ] 15.835082 s: SYSTEM: Attaching to [DSP1] ... SUCCESS !!! [HOST] [IPU2 ] 15.944396 s: SYSTEM: Attaching to [DSP2] ... SUCCESS !!! [HOST] [IPU2 ] 15.959372 s: SYSTEM: Attaching to [EVE1] ... SUCCESS !!! [HOST] [IPU2 ] 15.979411 s: SYSTEM: Attaching to [EVE2] ... SUCCESS !!! [HOST] [IPU2 ] 15.999389 s: SYSTEM: Attaching to [EVE3] ... SUCCESS !!! [HOST] [IPU2 ] 16.019429 s: SYSTEM: Attaching to [EVE4] ... SUCCESS !!! Could you please copy apps.out you built recently to /opt/vision_sdk folder & try with that Regards Surya Hi Surya, I have already identified my apps.out in directory /opt/vision_sdk Is the latest. I would like to know IPU2 Firmware which directory it is running in? I checked that "ti_components/os_tools/linux/targetfs/lib/firmware" the file inside is also the latest one generated. Is the system runs "ti_components/os_tools/linux/targetfs/lib/firmware" when it is running？ Regards, Xie Baojian Hi Xie Baojian, Depending upon the boot args passed in uenv.txt file, System will load apps.out either from SD card or nfs server path Regards Surya Hi Surya, my uenv.txt is: fdtfile=dra7-evm-infoadas.dtb args_mmc=part uuid mmc 0:2 uuid; setenv bootargs "console=ttyO0,115200n8 vram=16M root=PARTUUID=${uuid} rw rootwait ip=none mem=1024M" and my apps.out mounted to my VM directory through the network. I do not see the IPU2 Firmware execution path information. Regards, Xie Baojian Hi Xie Baojian, From the boot args, it is clear System is loading "apps.out" from SD card Attaching "uenv_nfs.txt" (also available under build/hlos/scripts/linux folder ) Use this if you want to load from nfs server path Modify the file & point to your file system path uenv_nfs.txt fdtfile=dra7-evm-infoadas.dtb args_mmc=setenv bootargs 'console=ttyO0,115200n8 vram=16M root=/dev/nfs rw nfsroot=172.24.210.101:/adasuser/shiju/ADAS/ti_components/os_tools/linux/targetfs rootwait ip=dhcp mem=1024M' Regards Surya Hi Surya, I try your uenv_nfs.txt， But it cannot log in . the info is： _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: [ 28.044468] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 28.058608] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 28.072453] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 28.086292] omap_hwmod: mmu0_dsp2: _wait_target_disable failed _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root Login incorrect dra7xx-evm login: Is it necessary to add any parameters? Regards, Xie Baojian Hi Xie Baojian, This thread is duplicate to below thread e2e.ti.com/.../697488 could you please close this thread ? Regards Surya