Ticket Name: Linux/TDA2: TDA2xx/linux [FAILED] Failed to start Load Kernel Modules Query Text: Part Number: TDA2 Tool/software: Linux when i start the system， In the boot phase There is an error message： [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. Why did this error occur? here is my boot_log： log_boot.txt OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 165 bytes read in 3 ms (53.7 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3552144 bytes read in 89 ms (38.1 MiB/s) 106665 bytes read in 29 ms (3.5 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x363390 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff0a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00018-gd326d64 (htf@ubuntu) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Apr 2 20:16:47 CST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=2ca9f500-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 410844K/979968K available (6619K kernel code, 319K rwdata, 2388K rodata, 340K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d402c (9009 kB) [ 0.000000] .init : 0xc08d5000 - 0xc092a000 ( 340 kB) [ 0.000000] .data : 0xc092a000 - 0xc0979d60 ( 320 kB) [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000333] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000341] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000776] Console: colour dummy device 80x30 [ 0.000793] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000799] This ensures that you still see kernel messages. Please [ 0.000805] update your kernel commandline. [ 0.000817] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000830] pid_max: default: 32768 minimum: 301 [ 0.000927] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000937] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001480] Initializing cgroup subsys io [ 0.001496] Initializing cgroup subsys memory [ 0.001521] Initializing cgroup subsys devices [ 0.001532] Initializing cgroup subsys freezer [ 0.001544] Initializing cgroup subsys perf_event [ 0.001555] Initializing cgroup subsys pids [ 0.001583] CPU: Testing write buffer coherency: ok [ 0.001784] /cpus/cpu@0 missing clock-frequency property [ 0.001799] /cpus/cpu@1 missing clock-frequency property [ 0.001810] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001842] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080060] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080129] Brought up 2 CPUs [ 0.080142] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080149] CPU: All CPU(s) started in HYP mode. [ 0.080154] CPU: Virtualization extensions available. [ 0.080534] devtmpfs: initialized [ 0.109254] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110223] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.313043] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.317268] pinctrl core: initialized pinctrl subsystem [ 0.318123] NET: Registered protocol family 16 [ 0.319047] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.340216] cpuidle: using governor ladder [ 0.370237] cpuidle: using governor menu [ 0.378716] OMAP GPIO hardware version 0.1 [ 0.385122] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.401175] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.401189] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.410442] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.410452] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.410920] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.410929] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.411516] OMAP DMA hardware revision 0.0 [ 0.451432] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.452588] edma 43300000.edma: memcpy is disabled [ 0.457247] edma 43300000.edma: TI EDMA DMA engine driver [ 0.461657] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.461841] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.462004] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.462162] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.462453] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.462638] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.465650] palmas 0-0058: IRQ missing: skipping irq request [ 0.481077] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.553399] pcf857x 0-0020: probed [ 0.553952] pcf857x 0-0021: probed [ 0.554101] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554490] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554695] media: Linux media interface: v0.10 [ 0.554746] Linux video capture interface: v2.00 [ 0.554789] pps_core: LinuxPPS API ver. 1 registered [ 0.554797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554821] PTP clock support registered [ 0.554867] EDAC MC: Ver: 3.0.0 [ 0.555616] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555919] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.556247] Advanced Linux Sound Architecture Driver Initialized. [ 0.557082] clocksource: Switched to clocksource arch_sys_counter [ 0.567652] NET: Registered protocol family 2 [ 0.568150] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.568213] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.568338] TCP: Hash tables configured (established 8192 bind 8192) [ 0.568384] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.568415] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568625] NET: Registered protocol family 1 [ 0.568895] RPC: Registered named UNIX socket transport module. [ 0.568904] RPC: Registered udp transport module. [ 0.568911] RPC: Registered tcp transport module. [ 0.568917] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569915] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579841] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580488] NFS: Registering the id_resolver key type [ 0.580516] Key type id_resolver registered [ 0.580523] Key type id_legacy registered [ 0.580577] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581840] bounce: pool size: 64 pages [ 0.581990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.582005] io scheduler noop registered [ 0.582016] io scheduler deadline registered [ 0.582048] io scheduler cfq registered (default) [ 0.586948] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.590159] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.590172] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.590206] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.590227] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.620339] dra7-pcie 51000000.pcie_rc: link is not up [ 0.620518] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.620531] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.620542] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.620552] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.620949] PCI: bus0: Fast back to back transfers disabled [ 0.621068] PCI: bus1: Fast back to back transfers enabled [ 0.621152] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.621167] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.621180] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.621397] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.681308] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.684700] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.693036] console [ttyS0] enabled [ 1.697444] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.707157] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.717212] [drm] Initialized drm 1.1.0 20060810 [ 1.723222] OMAP DSS rev 6.1 [ 1.726966] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.742737] loop: module loaded [ 1.746247] vmemexp device MAJOR num = 246 [ 1.750401] vmemexp class registered [ 1.754112] /dev/vmemexp device registered [ 1.758246] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.763921] nand: No NAND device found [ 1.767710] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.777644] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.783042] 7 ofpart partitions found on MTD device spi32766.0 [ 1.788920] Creating 7 MTD partitions on "spi32766.0": [ 1.794084] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.800200] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.806529] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.813476] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.820174] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.827579] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.833925] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.841707] libphy: Fixed MDIO Bus: probed [ 1.897114] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.903239] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.913520] libphy: 48485000.mdio: probed [ 1.917591] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.925634] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.934347] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6 [ 1.941044] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.948050] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7 [ 1.956656] mousedev: PS/2 mouse device common for all mice [ 1.962872] i2c /dev entries driver [ 1.971657] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.977264] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.983648] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.990206] evm_3v3_sw: supplied by sysen1 [ 2.070864] mmc0: MAN_BKOPS_EN bit is not set [ 2.107574] mmc0: new HS200 MMC card at address 0001 [ 2.123013] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.138074] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.144273] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.152055] ledtrig-cpu: registered to indicate activity on CPUs [ 2.160755] aic_dvdd: supplied by evm_3v3_sw [ 2.166656] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.174313] NET: Registered protocol family 10 [ 2.179724] sit: IPv6 over IPv4 tunneling driver [ 2.184969] NET: Registered protocol family 17 [ 2.189690] Key type dns_resolver registered [ 2.194090] omap_voltage_late_init: Voltage driver support not added [ 2.201018] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.207250] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.213959] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.220209] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.228508] Power Management for TI OMAP4+ devices. [ 2.233583] Registering SWP/SWPB emulation handler [ 2.240531] dmm 4e000000.dmm: initialized all PAT entries [ 2.247886] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.254527] [drm] No driver support for vblank timestamp query. [ 2.260879] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.267733] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.308327] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.321067] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.327995] hctosys: unable to open rtc device (rtc0) [ 2.341324] evm_1v8: disabling [ 2.344395] aic_dvdd: disabling [ 2.347571] vmmcwl_fixed: disabling [ 2.351253] ldousb: disabling [ 2.354633] ALSA device list: [ 2.357628] #0: DRA7xx-EVM [ 2.361167] Waiting for root device PARTUUID=2ca9f500-02... [ 2.566938] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.581986] mmc2: new ultra high speed DDR50 SDHC card at address aaaa [ 2.588873] mmcblk1: mmc2:aaaa SS08G 7.40 GiB [ 2.598492] mmcblk1: p1 p2 [ 2.690402] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.701855] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 2.920888] EXT4-fs (mmcblk1p2): recovery complete [ 2.929446] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.937619] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 2.947186] devtmpfs: mounted [ 2.950358] Freeing unused kernel memory: 340K [ 2.954819] This architecture does not have kernel memory protection. [ 3.077237] systemd[1]: System time before build time, advancing clock. [ 3.107526] random: systemd: uninitialized urandom read (16 bytes read, 21 bits of entropy available) [ 3.122619] random: systemd: uninitialized urandom read (16 bytes read, 21 bits of entropy available) [ 3.134000] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.152464] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 3.181228] systemd[1]: Set hostname to . [ 3.237533] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.249356] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.268457] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 3.296989] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.310517] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.385834] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.395364] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.405247] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.738362] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 3.746151] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 3.753941] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 3.761235] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 3.768702] systemd[1]: sysinit.target: Found dependency on dbus.socket/start [ 3.775871] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 3.783314] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 3.792766] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 3.829606] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.857490] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.887367] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.917447] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.948485] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.977342] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 3.997257] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.017370] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.037357] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.057830] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.077285] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.097864] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.147460] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.168016] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.184597] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.247304] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.269444] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.299437] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.329492] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.344493] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.358847] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 4.377648] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.407284] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.427376] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.487470] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.507434] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.543564] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.577490] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.597308] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 4.617481] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 5.266750] systemd-journald[160]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Coldplug all Devices. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 5.701263] omap-rproc 55020000.ipu: assigned reserved memory nod ipu2_cma@95800000 Starting Load/Save Random Seed... [ 5.722109] remoteproc0: 55020000.ipu is available [ 5.732773] remoteproc0: Note: remoteproc is still under development and considered experimental. [ OK ] Started Create Volatile Files and Directories.[ 5.759577] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.785158] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ OK ] Started Load/Save Random Seed.[ 5.803472] remoteproc1: 40800000.dsp is available [ 5.826897] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.844034] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.870124] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 5.887878] remoteproc2: 41000000.dsp is available [ 5.902123] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 5.922263] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.099693] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [ 6.147227] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Found device /dev/ttyS0. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ 6.385896] remoteproc0: registered virtio0 (type 7) [ 6.391204] remoteproc1: registered virtio1 (type 7) [ 6.557513] SCSI subsystem initialized [ 6.589340] remoteproc2: registered virtio2 (type 7) [ 6.630733] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 6.641954] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 6.670333] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Started Update UTMP about System Boot/Shutdown. [ 6.706123] CAN device driver interface [ OK ] Started Network Time Synchronization. [ 6.763187] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=358) [ 6.779580] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ OK ] Reached target System Time Synchronized. [ 6.843052] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled Starting Synchronize System and HW clocks... [ 6.866972] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Started Synchronize System and HW clocks. [ 6.945559] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 7.035579] scsi host0: ahci [ 7.039115] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 342 [ 7.082236] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on dropbear.socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ 7.322022] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started D-Bus System Message Bus. [ 7.407133] ata1: SATA link down (SStatus 0 SControl 300) Starting Network Service... [ OK ] Started Kernel Logging Service. [ 7.583958] net eth1: initializing cpsw version 1.15 (0) Starting uim-sysfs.service... [ 7.600117] net eth0: initialized cpsw ale version 1.4 [ OK ] Started System Logging Service. [ 7.629012] net eth0: ALE Table size 1024 Starting Avahi mDNS/DNS-SD Stack... [ 7.683860] net eth1: phy found : id is : 0x20005c7a Starting Save/Restore Sound Card State... Starting TI MultiCore Tools Daemon... [ 7.736484] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Starting Permit User Sessions... [ 7.769368] net eth0: initializing cpsw version 1.15 (0) Starting Print notice about GPLv3 packages... [ 7.804077] net eth0: phy found : id is : 0x20005c7a [ 7.824165] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Starting Login Service... Starting Telephony service... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ 7.884302] remoteproc0: powering up 55020000.ipu [ 7.922692] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 9507952 [ OK ] Started Network Service.[ 7.945417] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ OK ] Started Save/Restore Sound Card State. [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ OK ] Started Permit User Sessions. [ 7.991051] remoteproc0: remote processor 55020000.ipu is now up [ 7.999012] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.005751] remoteproc1: powering up 40800000.dsp [ 8.023869] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 7449552 [ 8.061079] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 8.066975] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 8.072928] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 8.206524] remoteproc1: remote processor 40800000.dsp is now up [ 8.240428] virtio_rpmsg_bus virtio1: rpmsg host is online [ 8.257438] remoteproc2: powering up 41000000.dsp [ 8.283116] Bluetooth: Core ver 2.21 [ 8.286754] NET: Registered protocol family 31 [ 8.301927] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 7449552 [ 8.306965] NET: Registered protocol family 15 [ 8.329597] Bluetooth: HCI device and connection manager initialized [ 8.335994] Bluetooth: HCI socket layer initialized [ 8.363724] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 8.369617] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 8.375552] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 8.389062] Bluetooth: L2CAP socket layer initialized [ 8.394165] Bluetooth: SCO socket layer initialized [ 8.504235] Initializing XFRM netlink socket [ 8.535389] remoteproc2: remote processor 41000000.dsp is now up [ 8.560392] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.576235] random: nonblocking pool is initialized [ 8.620850] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 8.633950] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [ 8.661879] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [ 8.669718] NET: Registered protocol family 41 [ 8.960751] usbcore: registered new interface driver usbfs [ 8.977353] usbcore: registered new interface driver hub [ 8.991814] usbcore: registered new device driver usb [ 9.044703] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered [ 9.059356] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered [ 9.084766] dwc3 48890000.usb: otg: can't start till gadget registers [ 9.111763] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.125832] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 9.143576] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 9.163045] xhci-hcd xhci-hcd.1.auto: irq 500, io mem 0x488d0000 [ 9.177784] hub 1-0:1.0: USB hub found [ 9.185835] hub 1-0:1.0: 1 port detected [ 9.194877] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.208965] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 9.225699] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.244658] hub 2-0:1.0: USB hub found [ 9.252525] hub 2-0:1.0: 1 port detected [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Network. Starting Network Name Resolution... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started Login Service. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 9.748072] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 9.804755] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 9.813933] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: Responses: Hi , Are you able to login from the prompt . ? Regards Chetan.M Hi Chetan.M, Now i cannot log in use root, the info is: _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: [ 28.044468] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 28.058608] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 28.072453] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 28.086292] omap_hwmod: mmu0_dsp2: _wait_target_disable failed _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root Login incorrect dra7xx-evm login: How can I log in? Regards, Xie Baojian Hi Xie, From your logs I notice that the kernel still continues to load and you're able to get to prompt. Do you notice this error every time? Can you run the below commands on the target ? systemctl status systemd-modules-load.service lsmod Which boot media are you using? Can you try an SD boot with the rootfs and boot partitions flashed to the SD card? It's possible the zImage and the kernel modules (in the targetfs) are not in sync. Regards Shravan Hi Shravan, I booted from the path of the virtual machine I mounted，not use SD boot. My start.sh is: ifconfig eth0 172.17.123.117 netmask 255.255.224.0 mount -t nfs -o nolock,nfsvers=3,vers=3 172.17.123.14:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs /mnt cd /mnt/opt/vision_sdk/ ./load_ocl_kos.sh source ./vision_sdk_load.sh ./apps.out My uenv.txt is: fdtfile=dra7-evm-infoadas.dtb args_mmc=setenv bootargs 'console=ttyO0,115200n8 vram=16M root=/dev/nfs rw nfsroot=172.17.123.14:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs rootwait ip=dhcp mem=1024M' Is there a problem with this setting? Regards, Xie Baojian add: i boot from SD card， and log in to the mount path。 Hi Xie, Have you made any changes to the kernel? If yes, please recreate the SD card (using the steps in the vision-SDK user guide -- how to create a SD card). Your uenv.txt settings are fine, but it looks to me that the zImage and the kernel modules are out of sync. Creating the card is a one-time step (provided you're not making any more changes to the linux kernel), and you can subsequently use NFS. Regards Shravan Hi Shravan, I have create my SD card, when i use NFS + SD boot mode , Is only MLO、u-boot.img、uenv.txt three files in the SD card? Where is the zImage file placed? Regards， Xie Baojian Hi Shravan, If i use NFS + SD boot mode, Do I need to use tisdk-rootfs-image-dra7xx-evm.tar.xz ? and Do I need to Format SD card and create two partitions (boot (FAT32) and rootfs(ext4)) ? Regards, Xie Baojian Hi Xie, Yes you need to format your card and create two partitions -- boot (FAT32) and rootfs (ext4). The script mksdboot.sh does this (refer section 4.2 of docs/Linux/VisionSDK_LinuxUserGuide.pdf in vision-sdk). The zImage is present in the '/boot' folder of the rootfs (ext4) partition. Regards Shravan Hi Shravan, I have recreate my SD card and My compilation mode is tda2xx_evm_linux_opencx. But it is still cannot log in use root. Below is the boot log： log-boot.txt dra7xx-evm login: [ 32.044515] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 32.058657] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 32.072498] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 32.086190] omap_hwmod: mmu0_dsp1: _wait_target_disable failed How can I solve it? Regards, Xie Baojian Hi Xie, Please try the following: 1. Ensure you're booting your board in production SD boot mode. This can be achieved by setting the SYSBOOT settings as below: SYSBOOT [ 0:15] : 00001100 10000001 2. Ensure the SD card is connected to your pc and run the below command (replace the contents of the uenv.txt in your FAT-32 partition): PC# cp /build/hlos/scripts/linux/uenv_sd.txt /uenv.txt 3. Halt at u-boot and run the below commands: env default -fa saveenv 4. Reboot the board. You should be able to log into the system. Regards Shravan Hi Shravan, Thank for your approach，I can log in ， But I cannot run the openclframecopy usecase successfully. I have done Following steps: 1、MAKECONFIG = tda2xx_evm_linux_opencx； Run below commands from vision_sdk\ build folder rm -rf ../binaries make clean make linux_clean make linux make linux_install make -s -j depend make -s -j opencx and build success without any errors my uenv.txt is uenv_sd.txt But it cannot run success on the target. Is there a problem with my build environment? Below is the log I have been plagued by this problem for a long time. I really hope to get your help. log13.txt at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 => pri arch=arm args_fit=setenv bootargs console=${console} args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} baudrate=115200 board=dra7xx board_name=dra7xx board_rev=H.0 boot_fdt=try boot_fit=0 boot_os=0 bootargs=androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard bootcmd=if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 0; fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run envboot; run mmcboot;run emmc_android_boot; bootdelay=2 bootdir=/boot bootenvfile=uEnv.txt bootfile=zImage bootm_size=0x10000000 bootpart=0:2 bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} console=ttyO0,115200n8 cpu=armv7 dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x100;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1 dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x100;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1 dfu_alt_info_qspi=MLO raw 0x0 0x040000;u-boot.img raw 0x040000 0x0100000;u-boot-spl-os raw 0x140000 0x080000;u-boot-env raw 0x1C0000 0x010000;u-boot-env.backup raw 0x1D0000 0x010000;kernel raw 0x1E0000 0x800000 dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000 dfu_bufsiz=0x10000 dofastboot=0 emmc_android_boot=setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv fdt_part 3; setenv boot_part 9; if test $reboot_image = recovery; then setenv boot_part 8; setenv reboot_image boot; saveenv; fi;setenv machid fe6; mmc dev $mmcdev; mmc rescan; part start mmc ${mmcdev} ${fdt_part} fdt_start; part size mmc ${mmcdev} ${fdt_part} fdt_size; part start mmc ${mmcdev} ${boot_part} boot_start; part size mmc ${mmcdev} ${boot_part} boot_size; mmc read ${fdtaddr} ${fdt_start} ${fdt_size}; mmc read ${loadaddr} ${boot_start} ${boot_size}; echo Booting from eMMC ...; bootm $loadaddr $loadaddr $fdtaddr; envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi; ethaddr=7c:38:66:a1:e2:a6 fastboot.board_rev=H.0 fastboot.cpu=J6 fastboot.secure=GP fastboot.userdata_size=unknown fdt_addr_r=0x88000000 fdtaddr=0x88000000 fdtcontroladdr=fdf0a598 fdtfile=undefined findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-evm.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-evm-reva3.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = no; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am572x-idk-lcd-osd.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am572x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = no; then setenv fdtfile am571x-idk.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am571x-idk-lcd-osd.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am571x-idk-lcd-osd101t2587.dtb; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi; finduuid=part uuid mmc ${bootpart} uuid fit_bootfile=fitImage.itb fit_loadaddr=0x88000000 importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} kernel_addr_r=0x82000000 loadaddr=0x82000000 loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} loadfit=run args_fit; bootm ${loadaddr}#${fdtfile}; loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile} mmcboot=if mmc dev ${mmcdev}; then setenv devtype mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run loadfdt; echo Booting from mmc${mmcdev} ...; run args_mmc; bootz ${loadaddr} - ${fdtaddr}; fi; fi; fi; mmcdev=0 mmcloados=run args_mmc; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr} netloadfdt=tftp ${fdtaddr} ${fdtfile} netloadimage=tftp ${loadaddr} ${bootfile} nfsopts=nolock partitions=uuid_disk=${uuid_gpt_disk};name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs} partitions_android=uuid_disk=${uuid_gpt_disk};name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};name=bootloader,size=2304K,uuid=${uuid_gpt_bootloader};name=environment,size=256K,uuid=${uuid_gpt_environment};name=misc,size=128K,uuid=${uuid_gpt_misc};name=reserved,size=384K,uuid=${uuid_gpt_reserved};name=efs,size=16M,uuid=${uuid_gpt_efs};name=crypto,size=16K,uuid=${uuid_gpt_crypto};name=recovery,size=10M,uuid=${uuid_gpt_recovery};name=boot,size=10M,uuid=${uuid_gpt_boot};name=system,size=768M,uuid=${uuid_gpt_system};name=vendor,size=256M,uuid=${uuid_gpt_vendor};name=cache,size=256M,uuid=${uuid_gpt_cache};name=ipu1,size=8M,uuid=${uuid_gpt_ipu1};name=ipu2,size=8M,uuid=${uuid_gpt_ipu2};name=dsp1,size=8M,uuid=${uuid_gpt_dsp1};name=dsp2,size=8M,uuid=${uuid_gpt_dsp2};name=userdata,size=-,uuid=${uuid_gpt_userdata} pxefile_addr_r=0x80100000 ramdisk_addr_r=0x88080000 rdaddr=0x88080000 reboot_image=boot rootpath=/export/rootfs scriptaddr=0x80000000 scsidevs=0 serial#=0b0140144bb600a2 soc=omap5 static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off stderr=serial@4806a000 stdin=serial@4806a000 stdout=serial@4806a000 update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile} usbtty=cdc_acm vendor=ti ver=U-Boot 2016.05-00008-g1fbee98 (Jun 07 2018 - 20:31:19 +0800) vram=16M Environment size: 7470/131067 bytes => env default -fa ## Resetting to default environment => saveenv Saving Environment to MMC... Writing to redundant MMC(1)... done => reboot Unknown command 'reboot' - try 'help' => boot switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 165 bytes read in 2 ms (80.1 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3552160 bytes read in 110 ms (30.8 MiB/s) 106665 bytes read in 15 ms (6.8 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3633a0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff0a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00018-gd326d64 (hancan@hancan-virtual-machine) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Thu Jun 7 20:42:56 CST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=2ca9f500-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 410844K/979968K available (6619K kernel code, 319K rwdata, 2388K rodata, 340K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d402c (9009 kB) [ 0.000000] .init : 0xc08d5000 - 0xc092a000 ( 340 kB) [ 0.000000] .data : 0xc092a000 - 0xc0979d60 ( 320 kB) [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000329] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000337] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000772] Console: colour dummy device 80x30 [ 0.000787] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000794] This ensures that you still see kernel messages. Please [ 0.000799] update your kernel commandline. [ 0.000813] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000825] pid_max: default: 32768 minimum: 301 [ 0.000921] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000931] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001474] Initializing cgroup subsys io [ 0.001490] Initializing cgroup subsys memory [ 0.001514] Initializing cgroup subsys devices [ 0.001526] Initializing cgroup subsys freezer [ 0.001537] Initializing cgroup subsys perf_event [ 0.001548] Initializing cgroup subsys pids [ 0.001575] CPU: Testing write buffer coherency: ok [ 0.001777] /cpus/cpu@0 missing clock-frequency property [ 0.001792] /cpus/cpu@1 missing clock-frequency property [ 0.001802] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001834] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080058] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080128] Brought up 2 CPUs [ 0.080141] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080147] CPU: All CPU(s) started in HYP mode. [ 0.080152] CPU: Virtualization extensions available. [ 0.080531] devtmpfs: initialized [ 0.109242] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110221] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.313100] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.317325] pinctrl core: initialized pinctrl subsystem [ 0.318175] NET: Registered protocol family 16 [ 0.319103] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.340217] cpuidle: using governor ladder [ 0.370245] cpuidle: using governor menu [ 0.378708] OMAP GPIO hardware version 0.1 [ 0.385082] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.401068] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.401081] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.410323] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.410334] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.410795] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.410805] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.411376] OMAP DMA hardware revision 0.0 [ 0.451372] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.452531] edma 43300000.edma: memcpy is disabled [ 0.457176] edma 43300000.edma: TI EDMA DMA engine driver [ 0.461567] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.461744] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.461910] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.462064] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.462353] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.462539] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.465540] palmas 0-0058: IRQ missing: skipping irq request [ 0.480976] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.553288] pcf857x 0-0020: probed [ 0.553850] pcf857x 0-0021: probed [ 0.554000] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554391] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554596] media: Linux media interface: v0.10 [ 0.554647] Linux video capture interface: v2.00 [ 0.554690] pps_core: LinuxPPS API ver. 1 registered [ 0.554697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554721] PTP clock support registered [ 0.554766] EDAC MC: Ver: 3.0.0 [ 0.555511] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555809] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.556139] Advanced Linux Sound Architecture Driver Initialized. [ 0.556976] clocksource: Switched to clocksource arch_sys_counter [ 0.567594] NET: Registered protocol family 2 [ 0.568088] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.568151] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.568276] TCP: Hash tables configured (established 8192 bind 8192) [ 0.568322] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.568353] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568562] NET: Registered protocol family 1 [ 0.568831] RPC: Registered named UNIX socket transport module. [ 0.568840] RPC: Registered udp transport module. [ 0.568847] RPC: Registered tcp transport module. [ 0.568853] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569851] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579807] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580457] NFS: Registering the id_resolver key type [ 0.580484] Key type id_resolver registered [ 0.580492] Key type id_legacy registered [ 0.580545] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581805] bounce: pool size: 64 pages [ 0.581952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.581965] io scheduler noop registered [ 0.581977] io scheduler deadline registered [ 0.582010] io scheduler cfq registered (default) [ 0.586905] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.590173] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.590186] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.590219] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.590241] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.620429] dra7-pcie 51000000.pcie_rc: link is not up [ 0.620605] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.620618] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.620628] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.620638] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.621042] PCI: bus0: Fast back to back transfers disabled [ 0.621160] PCI: bus1: Fast back to back transfers enabled [ 0.621242] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.621257] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.621270] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.621489] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.681968] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.685355] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.695337] console [ttyS0] enabled [ 1.699736] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.709441] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.719491] [drm] Initialized drm 1.1.0 20060810 [ 1.725499] OMAP DSS rev 6.1 [ 1.729295] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.745084] loop: module loaded [ 1.748626] vmemexp device MAJOR num = 246 [ 1.752755] vmemexp class registered [ 1.756467] /dev/vmemexp device registered [ 1.760602] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.766274] nand: No NAND device found [ 1.770064] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.780008] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.785405] 7 ofpart partitions found on MTD device spi32766.0 [ 1.791288] Creating 7 MTD partitions on "spi32766.0": [ 1.796451] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.802569] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.808925] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.815850] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.822557] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.829958] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.836301] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.844100] libphy: Fixed MDIO Bus: probed [ 1.897007] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.903132] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.913632] libphy: 48485000.mdio: probed [ 1.917704] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.925746] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.934473] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6 [ 1.941169] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.948182] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7 [ 1.956804] mousedev: PS/2 mouse device common for all mice [ 1.963036] i2c /dev entries driver [ 1.971772] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.977389] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.983773] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.990332] evm_3v3_sw: supplied by sysen1 [ 2.070762] mmc0: MAN_BKOPS_EN bit is not set [ 2.107563] mmc0: new HS200 MMC card at address 0001 [ 2.123001] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.138059] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.144243] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.151978] ledtrig-cpu: registered to indicate activity on CPUs [ 2.160720] aic_dvdd: supplied by evm_3v3_sw [ 2.166623] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.174329] NET: Registered protocol family 10 [ 2.179735] sit: IPv6 over IPv4 tunneling driver [ 2.184944] NET: Registered protocol family 17 [ 2.189669] Key type dns_resolver registered [ 2.194071] omap_voltage_late_init: Voltage driver support not added [ 2.200999] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.207230] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.213938] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.220191] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.228443] Power Management for TI OMAP4+ devices. [ 2.233519] Registering SWP/SWPB emulation handler [ 2.240461] dmm 4e000000.dmm: initialized all PAT entries [ 2.247819] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.254460] [drm] No driver support for vblank timestamp query. [ 2.260815] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.267669] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.308218] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.327906] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.334795] hctosys: unable to open rtc device (rtc0) [ 2.348137] evm_1v8: disabling [ 2.351220] aic_dvdd: disabling [ 2.354379] vmmcwl_fixed: disabling [ 2.358073] ldousb: disabling [ 2.361473] ALSA device list: [ 2.364452] #0: DRA7xx-EVM [ 2.367999] Waiting for root device PARTUUID=2ca9f500-02... [ 2.566831] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.581884] mmc2: new ultra high speed DDR50 SDHC card at address aaaa [ 2.598785] mmcblk1: mmc2:aaaa SS08G 7.40 GiB [ 2.608384] mmcblk1: p1 p2 [ 2.700446] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.711919] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 3.649335] EXT4-fs (mmcblk1p2): recovery complete [ 3.655107] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.663289] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 3.674130] devtmpfs: mounted [ 3.677382] Freeing unused kernel memory: 340K [ 3.681843] This architecture does not have kernel memory protection. [ 3.807209] systemd[1]: System time before build time, advancing clock. [ 3.842182] random: systemd: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.857727] random: systemd: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 3.873367] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.891880] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 3.921000] systemd[1]: Set hostname to . [ 3.978497] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.990435] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.997224] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 4.025881] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 4.042360] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 4.120504] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 4.129985] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 4.139825] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 4.468095] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start [ 4.475884] systemd[1]: sockets.target: Found dependency on dbus.socket/start [ 4.483108] systemd[1]: sockets.target: Found dependency on sysinit.target/start [ 4.490560] systemd[1]: sockets.target: Found dependency on alignment.service/start [ 4.498293] systemd[1]: sockets.target: Found dependency on basic.target/start [ 4.505548] systemd[1]: sockets.target: Found dependency on sockets.target/start [ 4.512998] systemd[1]: sockets.target: Breaking ordering cycle by deleting job dbus.socket/start [ 4.521929] systemd[1]: dbus.socket: Job dbus.socket/start deleted to break ordering cycle starting with sockets.target/start [ SKIP ] Ordering cycle found, skipping D-Bus System Message Bus Socket [ 4.557398] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start [ 4.565184] systemd[1]: sockets.target: Found dependency on rpcbind.socket/start [ 4.572661] systemd[1]: sockets.target: Found dependency on sysinit.target/start [ 4.580130] systemd[1]: sockets.target: Found dependency on alignment.service/start [ 4.587867] systemd[1]: sockets.target: Found dependency on basic.target/start [ 4.595125] systemd[1]: sockets.target: Found dependency on sockets.target/start [ 4.602592] systemd[1]: sockets.target: Breaking ordering cycle by deleting job rpcbind.socket/start [ 4.611803] systemd[1]: rpcbind.socket: Job rpcbind.socket/start deleted to break ordering cycle starting with sockets.target/start [ SKIP ] Ordering cycle found, skipping RPCbind Server Activation Socket [ 4.637317] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start [ 4.645101] systemd[1]: sockets.target: Found dependency on avahi-daemon.socket/start [ 4.653015] systemd[1]: sockets.target: Found dependency on sysinit.target/start [ 4.660481] systemd[1]: sockets.target: Found dependency on alignment.service/start [ 4.668218] systemd[1]: sockets.target: Found dependency on basic.target/start [ 4.675475] systemd[1]: sockets.target: Found dependency on sockets.target/start [ 4.682942] systemd[1]: sockets.target: Breaking ordering cycle by deleting job avahi-daemon.socket/start [ 4.692590] systemd[1]: avahi-daemon.socket: Job avahi-daemon.socket/start deleted to break ordering cycle starting with sockets.target/start [ SKIP ] Ordering cycle found, skipping Avah...S/DNS-SD Stack Activation Socket [ 4.727345] systemd[1]: dropbear.socket: Found ordering cycle on dropbear.socket/stop [ 4.735216] systemd[1]: dropbear.socket: Found dependency on sysinit.target/start [ 4.742781] systemd[1]: dropbear.socket: Found dependency on alignment.service/start [ 4.750598] systemd[1]: dropbear.socket: Found dependency on basic.target/start [ 4.758002] systemd[1]: dropbear.socket: Found dependency on sockets.target/start [ 4.765520] systemd[1]: dropbear.socket: Found dependency on dropbear.socket/stop [ 4.773075] systemd[1]: dropbear.socket: Breaking ordering cycle by deleting job alignment.service/start [ 4.782636] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with dropbear.socket/stop [ SKIP ] Ordering cycle found, skipping alignment.service [ 4.820458] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.847295] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.867357] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.887254] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.907263] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.927225] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.947223] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.967324] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.997313] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 5.028394] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 5.077428] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.107907] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.187335] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 5.209453] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.244658] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.269357] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 5.299520] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 5.327844] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.387308] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 5.404701] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 5.410440] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.438622] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.457179] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.477182] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.497227] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.547349] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 5.573372] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 5.597238] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 5.617319] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 5.647409] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Setup Virtual Console. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 6.269836] systemd-journald[117]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 6.645296] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 6.671979] remoteproc0: 55020000.ipu is available [ 6.684290] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 6.705705] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.740884] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 6.759524] remoteproc1: 40800000.dsp is available Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ 6.781929] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 6.795057] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. Starting Create Volatile Files and Directories... [ 6.826685] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 6.850174] remoteproc2: 41000000.dsp is available [ 6.865408] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 6.888574] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Found device /dev/ttyS0. [ 6.942505] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.957989] remoteproc0: registered virtio0 (type 7) [ 6.982793] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. [ 7.068743] remoteproc1: registered virtio1 (type 7) [ 7.084233] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [ 7.158582] remoteproc2: registered virtio2 (type 7) Starting Update UTMP about System Boot/Shutdown... [ 7.262284] SCSI subsystem initialized Starting Network Time Synchronization... [ 7.339781] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Started Network Time Synchronization. [ 7.406262] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Started Update UTMP about System Boot/Shutdown.[ 7.417726] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 7.440443] CAN device driver interface [ 7.517218] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=358) Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [ OK ] Started Synchronize System and HW clocks. [ 7.590342] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 7.607359] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.628143] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 7.661923] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 7.776003] scsi host0: ahci [ 7.779739] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 342 [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on dropbear.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ 7.969023] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Starting Print notice about GPLv3 packages... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Save/Restore Sound Card State... Starting uim-sysfs.service... Starting TI MultiCore Tools Daemon... [ OK ] Started System Logging Service. Starting Permit User Sessions... Starting Network Service... [ OK ] Started Kernel Logging Service. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Permit User Sessions. [ 8.157037] ata1: SATA link down (SStatus 0 SControl 300) [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ 8.195868] net eth1: initializing cpsw version 1.15 (0) [ OK ] Started Network Service. [ 8.234583] net eth0: initialized cpsw ale version 1.4 [ 8.263256] net eth0: ALE Table size 1024 [ 8.293195] NET: Registered protocol family 15 [ 8.318197] net eth1: phy found : id is : 0x20005c7a [ 8.371771] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.411130] net eth0: initializing cpsw version 1.15 (0) [ 8.454059] net eth0: phy found : id is : 0x20005c7a [ 8.499265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.594856] Initializing XFRM netlink socket [ 8.949514] remoteproc0: powering up 55020000.ipu [ 8.969231] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 3506540 [ 8.986247] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 9.040504] remoteproc0: remote processor 55020000.ipu is now up [ 9.058215] virtio_rpmsg_bus virtio0: rpmsg host is online [ 9.072003] remoteproc1: powering up 40800000.dsp [ 9.082869] random: nonblocking pool is initialized [ 9.089121] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 9.098842] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 2851415 [ 9.118291] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 9.124176] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 9.130114] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 9.177883] remoteproc1: remote processor 40800000.dsp is now up [ 9.192761] virtio_rpmsg_bus virtio1: rpmsg host is online [ 9.198343] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x3d [ 9.214629] remoteproc2: powering up 41000000.dsp [ 9.231706] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 2851415 [ 9.253303] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 9.259191] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 9.265153] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ 9.333515] remoteproc2: remote processor 41000000.dsp is now up [ 9.352288] virtio_rpmsg_bus virtio2: rpmsg host is online [ 9.357869] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 9.396790] NET: Registered protocol family 41 [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 9.802990] usbcore: registered new interface driver usbfs [ 9.815713] usbcore: registered new interface driver hub [ 9.821311] usbcore: registered new device driver usb [ 9.875783] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered [ 9.882994] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered [ 9.891959] dwc3 48890000.usb: otg: can't start till gadget registers [ 9.898961] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 9.899590] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.899610] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 9.919300] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 9.928175] xhci-hcd xhci-hcd.1.auto: irq 500, io mem 0x488d0000 [ 9.934831] hub 1-0:1.0: USB hub found [ 9.941470] hub 1-0:1.0: 1 port detected [ 9.945820] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.953060] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 9.962386] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.972707] hub 2-0:1.0: USB hub found [ 9.976564] hub 2-0:1.0: 1 port detected [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ 10.454575] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 10.462890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# [ 19.194447] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 19.208354] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 20.084449] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 20.098354] omap_hwmod: mmu0_dsp2: _wait_target_disable failed root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root -sh: root: command not found root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# cd /opt/vision_sdk/ root@dra7xx-evm:/opt/vision_sdk# ls FragShader.fsh VipClockInversion.sh cmemk.ko enableIpu2CCSConectivity.sh load_ocl_kos.sh opencl_env.sh ub964Init.sh FragShader3Dsfm.fsh apps.out debugss_kmodule.ko gdbserverproxy.ko memcache_load.sh ov106x3Config.sh vision_sdk_load.sh VertShader.vsh bin disableDssInterruptsOnA15.sh hdmiReceiverConfig.sh memcache_unload.sh pvrscope vision_sdk_ov490_pinmux.sh VertShader3Dsfm.vsh car.pod enableImx290.sh jeep2.bmp models tda2exEnableAVB.sh vision_sdk_unload.sh root@dra7xx-evm:/opt/vision_sdk# ./load_ocl_kos.sh Opened log file: lad.txt numProcessors = 5 id = 0 baseId = 0 Spawned daemon: /usr/bin/lad_dra7xx [ 49.788875] CMEMK module: reference Linux version 4.4.84 [ 49.794888] allocated heap buffer 0x40400000 of size 0x100000 [ 49.801212] cmemk initialized root@dra7xx-evm:/opt/vision_sdk# source ./vision_sdk_load.sh [ 71.469463] DMA: Module install successful, device major num = 242 [ 71.475909] DRV: Module install successful insmod: ERROR: could not insert module ./bin/cmemk.ko: File exists ./disableDssInterruptsOnA15.sh: line 11: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 12: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 13: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 14: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 15: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 16: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 17: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 18: @0x4A002AC4:: command not found ./disableDssInterruptsOnA15.sh: line 19: @0x4A002AC4:: command not found updated 0x4A002AC4 value is 00930000 root@dra7xx-evm:/opt/vision_sdk# ./apps.out [HOST] OSA: MEM: 0: Mapped 0xa0100000 to 0xb65af000 of size 0x00100000 [HOST] OSA: MEM: 1: Mapped 0x84203000 to 0xa6baf000 of size 0x0fa00000 [HOST] OSA: MEM: 2: Mapped 0xa0200000 to 0xa6aef000 of size 0x00040000 [HOST] OSA: MEM: 3: Mapped 0xa02c0000 to 0xa6b2f000 of size 0x00080000 [HOST] OSA: MEM: 4: Mapped 0x00000000 to 0x00000000 of size 0x00000000 [HOST] OSA: HOST Remote Log Shared Memory @ 0xa024f140 [HOST] OSA: IPU2 Remote Log Shared Memory @ 0xa0363da0 80.228166] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) [ 80.265311] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) [ HOST] [HOST ] 143.146098 s: SYSTEM: System A15 Init in proress !!! [HOST] [HOST ] 143.146190 s: SYSTEM: IPC: Init in progress !!! [HOST] [HOST ] 143.146190 s: SYSTEM: IPC: Notify init in progress !!! [HOST] [HOST ] 143.147501 s: SYSTEM: IPC: [IPU2] socket bind success !!! (dst vproc = 1, endpt = 81) [HOST] [HOST ] 143.147532 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 81) !!! [HOST] [HOST ] 143.147593 s: SYSTEM: IPC: [IPU2] socket connect success !!! (dst vproc = 1, endpt = 80) [HOST] [HOST ] 143.147593 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 1024) !!! [HOST] [HOST ] 143.147715 s: SYSTEM: IPC: Notify init DONE !!! [HOST] [HOST ] 143.147745 s: SYSTEM: MSGQ: MsgQ init in progress !!! [HOST] [HOST ] 143.147837 s: SYSTEM: MSGQ: MsgQ init DONE !!! [HOST] [HOST ] 143.147837 s: SYSTEM: IPC: Init DONE !!! [HOST] [HOST ] 143.147837 s: SYSTEM: Initializing A15 Links !!! [HOST] [HOST ] 143.147959 s: IPC_OUT_0 : Init done - linkid-0x2000000 [HOST] [HOST ] 143.148081 s: IPC_OUT_1 : Init done - linkid-0x2000001 [HOST] [HOST ] 143.148173 s: IPC_OUT_2 : Init done - linkid-0x2000002 [HOST] [HOST ] 143.148264 s: IPC_OUT_3 : Init done - linkid-0x2000003 [HOST] [HOST ] 143.148478 s: IPC_OUT_4 : Init done - linkid-0x2000004 [HOST] [HOST ] 143.148600 s: IPC_IN_0 : Init done - linkid-0x200000a [HOST] [HOST ] 143.148722 s: IPC_IN_1 : Init done - linkid-0x200000b [HOST] [HOST ] 143.148844 s: IPC_IN_2 : Init done - linkid-0x200000c [HOST] [HOST ] 143.148935 s: IPC_IN_3 : Init done - linkid-0x200000d [HOST] [HOST ] 143.149057 s: IPC_IN_4 : Init done - linkid-0x200000e [HOST] [HOST ] 143.149149 s: IPC_IN_5 : Init done - linkid-0x200000f [HOST] [HOST ] 143.149271 s: IPC_IN_6 : Init done - linkid-0x2000010 [HOST] [HOST ] 143.149362 s: NULL_0 : Init done - linkid-0x2000014 [HOST] [HOST ] 143.149454 s: NULL_1 : Init done - linkid-0x2000015 [HOST] [HOST ] 143.149576 s: NULL_SRC_0 : Init done - linkid-0x2000039 [HOST] [HOST ] 143.149667 s: ALGORITHM_0 : Init done - linkid-0x2000031 [HOST] [HOST ] 143.149789 s: ALGORITHM_1 : Init done - linkid-0x2000032 [HOST] [HOST ] 143.149881 s: ALGORITHM_2 : Init done - linkid-0x2000033 [HOST] [HOST ] 143.150003 s: ALGORITHM_3 : Init done - linkid-0x2000034 [HOST] [HOST ] 143.150094 s: ALGORITHM_4 : Init done - linkid-0x2000035 [HOST] [HOST ] 143.150186 s: ALGORITHM_5 : Init done - linkid-0x2000036 [HOST] [HOST ] 143.150277 s: ALGORITHM_6 : Init done - linkid-0x2000037 [HOST] [HOST ] 143.150369 s: ALGORITHM_7 : Init done - linkid-0x2000038 [HOST] [HOST ] 143.150552 s: DUP0 : Init done - linkid-0x0 [HOST] [HOST ] 143.150704 s: DUP1 : Init done - linkid-0x0 [HOST] [HOST ] 143.150857 s: DUP2 : Init done - linkid-0x0 [HOST] [HOST ] 143.151040 s: DUP3 : Init done - linkid-0x0 [HOST] [HOST ] 143.151192 s: DUP4 : Init done - linkid-0x0 [HOST] [HOST ] 143.151284 s: SYNC_0 : Init done - linkid-0x0 [HOST] [HOST ] 143.151436 s: SYNC_1 : Init done - linkid-0x0 [HOST] [HOST ] 143.151589 s: SYNC_2 : Init done - linkid-0x0 [HOST] [HOST ] 143.151741 s: SYNC_3 : Init done - linkid-0x0 [HOST] [HOST ] 143.151924 s: MERGE_0 : Init done - linkid-0x0 [HOST] [HOST ] 143.155005 s: MERGE_1 : Init done - linkid-0x0 [HOST] [HOST ] 143.155127 s: MERGE_2 : Init done - linkid-0x0 [HOST] [HOST ] 143.155249 s: MERGE_3 : Init done - linkid-0x0 [HOST] [HOST ] 143.155523 s: MERGE_4 : Init done - linkid-0x0 [HOST] [HOST ] 143.155645 s: SELECT_0 : Init done - linkid-0x0 [HOST] [HOST ] 143.155767 s: SELECT_1 : Init done - linkid-0x0 [HOST] [HOST ] 143.155859 s: GATE_0 : Init done - linkid-0x0 [HOST] [HOST ] 143.155950 s: GATE_1 : Init done - linkid-0x0 [HOST] [HOST ] 143.156011 s: GATE_2 : Init done - linkid-0x0 [HOST] [HOST ] 143.156103 s: GATE_3 : Init done - linkid-0x0 [HOST] [HOST ] 143.157201 s: SGXFRMCPY_0 : Init done - linkid-0x2000040 [HOST] [HOST ] 143.157231 s: SYSTEM: Initializing A15 Links ... DONE !!! [HOST] [HOST ] 143.157689 s: OSA: Adjusting global time, timeH by 0 units!!! [HOST] [HOST ] 143.157689 s: SYSTEM: System A15 Init Done !!! [HOST] [HOST ] 143.157841 s: NETWORK_CTRL: Starting Server (port=5000) !!! [HOST] [HOST ] 143.157902 s: NETWORK_CTRL: Starting Server ... DONE (port=5000) !!! [HOST] [IPU2 ] 72.002958 s: ***** IPU2 Firmware build time 20:58:27 Jun 7 2018 [HOST] [IPU2 ] 72.003141 s: *** SYSTEM: CPU Frequency , [HOST] [IPU2 ] 72.006008 s: SYSTEM: System Common Init in progress !!! [HOST] [IPU2 ] 72.014975 s: SYSTEM: IPC init in progress !!! [HOST] [IPU2 ] 72.015097 s: SYSTEM: Notify init done !!! [HOST] [IPU2 ] 72.016836 s: SYSTEM: MsgQ init done !!! [HOST] [IPU2 ] 72.017781 s: RpmsgInit in progress... [HOST] [IPU2 ] 72.017842 s: Connection established with HLOS, calling rpmsgInit [HOST] [IPU2 ] 72.018513 s: SYSTEM: IPC init DONE !!! [HOST] [IPU2 ] 72.023607 s: SYSTEM: System Common Init Done !!! [HOST] [IPU2 ] 72.023699 s: SYSTEM: System Init in progress !!! [HOST] [IPU2 ] 72.023790 s: SYSTEM: BSP Common Init in progress !!! [HOST] [IPU2 ] 72.023851 s: SYSTEM: BSP Common Init Done !!! [HOST] [IPU2 ] 72.023912 s: SYSTEM: BSP Platform Init in progress !!! [HOST] [IPU2 ] 72.024004 s: SYSTEM: BSP Platform Init Done !!! [HOST] [IPU2 ] 72.024065 s: SYSTEM: FVID2 Init in progress !!! [HOST] [IPU2 ] 72.024217 s: SYSTEM: FVID2 Init Done !!! [HOST] [IPU2 ] 72.024278 s: SYSTEM: VPS Init in progress !!! [HOST] [IPU2 ] 72.024370 s: SYSTEM: VPDMA Descriptor Memory Address translation ENABLED [0x80000000 -> 0x80000000] [HOST] [IPU2 ] 72.027176 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 72.027298 s: VPDMA Firmware Address = 0xa0349a80 [HOST] [IPU2 ] 72.027450 s: VPDMA Load Address = 0x4897d004 [HOST] [IPU2 ] 72.027542 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 72.027633 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 72.027694 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 72.028030 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 72.028121 s: VPDMA Firmware Address = 0xa0349a80 [HOST] [IPU2 ] 72.028213 s: VPDMA Load Address = 0x4899d004 [HOST] [IPU2 ] 72.028304 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 72.028396 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 72.028487 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 72.028792 s: *** VPDMA Firmware Loading... *** [HOST] [IPU2 ] 72.028884 s: VPDMA Firmware Address = 0xa0349a80 [HOST] [IPU2 ] 72.028975 s: VPDMA Load Address = 0x489bd004 [HOST] [IPU2 ] 72.029067 s: VPDMA Firmware Version = 0x4d0001b8 [HOST] [IPU2 ] 72.029158 s: VPDMA List Busy Status = 0x00000000 [HOST] [IPU2 ] 72.029219 s: *** VPDMA Firmware Load Success *** [HOST] [IPU2 ] 72.082779 s: SYSTEM: VPS Init Done !!! [HOST] [IPU2 ] 72.083633 s: UTILS: DMA: HWI Create for INT25 !!! [HOST] [IPU2 ] 72.083877 s: SYSTEM: SW Message Box Msg Pool, Free Msg Count = 1024 [HOST] [IPU2 ] 72.083968 s: SYSTEM: Heap = LOCAL_DDR @ 0x00000000, Total size = 262144 B (256 KB), Free size = 260728 B (254 KB) [HOST] [IPU2 ] 72.084121 s: SYSTEM: Heap = SR_OCMC @ 0x00000000, Total size = 0 B (0 KB), Free size = 0 B (0 KB) [HOST] [IPU2 ] 72.084273 s: SYSTEM: Heap = SR_DDR_CACHED @ 0x84203000, Total size = 262144000 B (250 MB), Free size = 262144000 B (250 MB) [HOST] [IPU2 ] 72.084517 s: SYSTEM: Heap = SR_DDR_NON_CACHED @ 0xa0100000, Total size = 1047168 B (0 MB), Free size = 1047168 B (0 MB) [HOST] [IPU2 ] 72.084670 s: SYSTEM: Initializing Links !!! [HOST] [IPU2 ] 72.233697 s: SYSTEM: Initializing Links ... DONE !!! [HOST] [IPU2 ] 72.234368 s: CHAINS: Application Started !!! [HOST] [IPU2 ] 72.243183 s: BOARD: Board Init in progress !!! [HOST] [IPU2 ] 72.243640 s: BOARD: Board Init Done !!! [HOST] [IPU2 ] 72.250594 s: [HOST] [HOST ] 143.704508 s: [HOST] [HOST ] [HOST] [HOST ] ==================== [HOST] [HOST ] Vision SDK Usecases [HOST] [HOST ] ==================== [HOST] [HOST ] 1: Single Camera Usecases [HOST] [HOST ] 2: Multi-Camera LVDS Usecases [HOST] [HOST ] 3: Open-Compute Usecases [HOST] [HOST ] [HOST] [HOST ] p: CPU Status [HOST] [HOST ] i: Show IP Addr (IPU + NDK + AVB) [HOST] [HOST ] [HOST] [HOST ] s: System Settings [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] z: Exit - AND SHUTDOWN Remote CPUs [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 3 [HOST] [HOST ] 147.803117 s: [HOST] [HOST ] [HOST] [HOST ] OpenCompute Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 2: OpenCV Usecases [HOST] [HOST ] 3: OpenCL Usecases [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] [HOST] [HOST ] 147.803178 s: [HOST] [HOST ] 147.803178 s: Unsupported option ' [HOST] [HOST ] '. Please try again [HOST] [HOST ] 147.803178 s: [HOST] [HOST ] [HOST] [HOST ] OpenCompute Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 2: OpenCV Usecases [HOST] [HOST ] 3: OpenCL Usecases [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 3 [HOST] [HOST ] 153.651375 s: [HOST] [HOST ] 153.651375 s: [HOST] [HOST ] [HOST] [HOST ] OpenCL Usecases [HOST] [HOST ] ---------------------------- [HOST] [HOST ] 1: 1CH VIP capture + OpenCL Copy (A15->DSP) + SGX Copy + DISPLAY [HOST] [HOST ] [HOST] [HOST ] x: Exit [HOST] [HOST ] [HOST] [HOST ] Enter Choice: [HOST] [HOST ] 1 [HOST] [HOST ] 159.932105 s: [HOST] [IPU2 ] 159.932257 s: CHAINS: Sensor create in progress [HOST] [IPU2 ] 159.932776 s: VIDEO_SENSOR: INST0 : I2C1 : I2C Addr = 0x30 [HOST] [IPU2 ] 160.026932 s: VIDEO_SENSOR: VIP 0: DRV ID 1203 (I2C ADDR 0x30): a635:0000:7fa2 [HOST] [IPU2 ] 160.027237 s: CHAINS: Sensor create ... DONE !!! [HOST] [IPU2 ] 160.042213 s: CAPTURE: Create in progress !!! [HOST] [IPU2 ] 160.042579 s: CAPTURE: VIP1 Slice0 PortA capture mode is [ 8-bit] !!! ASSERT (chains_vipSingleCamOpenCLFrameCopySgxDisplay_priv.c|chains_vipSingleCamOpenCLFrameCopySgxDisplay_Create|165) [HOST] [HOST ] 160.158726 s: IPC_IN_0 : Create in progress !!! [HOST] [HOST ] 160.159092 s: IPC_IN_0 : Create Done !!! [HOST] [HOST ] 160.159153 s: ALG: ERROR: No alg create function specified (algId = 6) !!! [HOST] [IPU2 ] 160.157658 s: CAPTURE: Create Done !!! [HOST] [IPU2 ] 160.158146 s: IPC_OUT_0 : Create in progress !!! [HOST] [IPU2 ] 160.158482 s: IPC_OUT_0 : Create Done !!! Hi Shravan, my all Steps is ： 1. clone kernel, uboot, cmem,sgx driver and target file system; 2. run hlos/scripts/linux/setup-linux-build-env.sh and ./hlos/scripts/linux/setup_linux.sh; 3. set git config; 4. git Opencl supported package; 5. MAKECONFIG = tda2xx_evm_linux_opencx； 6. my system path is :PATH="/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/cg_tools/linux/ti-cgt-c6000_8.1.0/bin:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/open_compute/opencl_rtos_am57xx_01_01_10_00/packages/ti/clocl:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs/usr/share/ti/opencl/bin/x86:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" 7. KERNEL_INSTALL_DIR="/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/kernel" 8. cd /vision_sdk/build run "rm -rf ../binaries/"; 9. make clean ; make liunx_clean; make -s -j dpend ; make -s -j opencx; 10. use uenv_sd.txt as uenv.txt; There is no error in the above steps . Can you see any clues? Regards, Xie Baojian Hi Xie, Would it be possible to create another thread for this issue? The issue pertaining to loading kernel modules seems to be resolved. Please create another thread on running openvx on VSDK and we will support you. Regards Shravan Hi Shravan, I have create another thread: e2e.ti.com/.../697488 and i will close this thread. Thank you for a lot. Regards, Xie Baojian