import gradio as gr
import torch
from PIL import Image
from ultralytics import YOLO
import matplotlib.pyplot as plt
import io
from matplotlib.backends.backend_agg import FigureCanvasAgg as FigureCanvas
plt.rcParams['font.family'] = 'SimHei'  # 用来正常显示中文标签
plt.rcParams['axes.unicode_minus'] = False  # 用来正常显示负号
model = YOLO(r'pcb-best.pt')


def predict(img, conf, iou):
    results = model.predict(img, conf=conf, iou=iou)
    name = results[0].names
    cls = results[0].boxes.cls
    copper = 0
    mousebite = 0
    open_defect = 0
    pin_hole = 0
    short = 0
    spur = 0
    for i in cls:
        if i == 0:
            copper += 1
        elif i == 1:
            mousebite += 1
        elif i == 2:
            open_defect += 1
        elif i == 3:
            pin_hole += 1
        elif i == 4:
            short += 1
        elif i == 5:
            spur += 1
        # 绘制柱状图
    fig, ax = plt.subplots()
    categories = ['Copper', 'Mousebite', 'Open Defect', 'Pin Hole', 'Short', 'Spur']
    counts = [copper, mousebite, open_defect, pin_hole, short, spur]
    ax.bar(categories, counts)
    ax.set_title('缺陷类别计数')
    plt.ylim(0,5)
    ax.set_xlabel('缺陷类别')
    ax.set_ylabel('数目')
    # 将图表保存为字节流
    buf = io.BytesIO()
    canvas = FigureCanvas(fig)
    canvas.print_png(buf)
    plt.close(fig)  # 关闭图形，释放资源

    # 将字节流转换为PIL Image
    image_png = Image.open(buf)
    # 绘制并返回结果图片和类别计数图表

    for i, r in enumerate(results):
        # Plot results image
        im_bgr = r.plot()  # BGR-order numpy array
        im_rgb = Image.fromarray(im_bgr[..., ::-1])  # RGB-order PIL image

        # Show results to screen (in supported environments)
        return im_rgb, image_png


base_conf, base_iou = 0.25, 0.45
title = "基于YOLO-V8的PCB电路板缺陷检测"
des = "鼠标点击上传图片即可检测缺陷，可通过鼠标调整预测置信度，还可点击网页最下方示例图片进行预测"
interface = gr.Interface(
    inputs=['image', gr.Slider(maximum=1, minimum=0, value=base_conf), gr.Slider(maximum=1, minimum=0, value=base_iou)],
    outputs=["image", 'image'], fn=predict, title=title, description=des,
    examples=[["example1.jpg", base_conf, base_iou],
              ["example2.jpg", base_conf, base_iou],
              ["example3.jpg", base_conf, base_iou]])
interface.launch()