text
stringlengths 70
7.86k
| label
class label 2
classes |
|---|---|
how fitting
Was nice to find that Amazon sold brass fittings. I used this fitting for a boost gauge in my car. No parts stores has a 1/8 barb fitting to a female thread.Nice quality, great price. | 1positive
|
Good Quality
Really good quality. I'm not certain all the uses my husband has planned for this item, but I do know he used it to make an inscription plaque for a desk he built. The plaque turned out beautifully. | 1positive
|
Stay Away!!!!
These are some of the worst drill bits I have ever had the displeasure to use. I caution anyone who is trying to achieve any fine control over their drilling to stay far away from these.First, they seem to get quite hot, very quickly. I see some other reviewers have noted this. Working in hardwoods you will especially note this, with good potential for burning the wood.But far worse than that is the overly aggressive bite these take of the wood once they dig in. Trust me; whether its hardwood, softwood, even plywood - when these start to "bite" they rip and tear into the wood with such aggression that only one of two outcomes is possible: either the workpiece will jump from your hands (if it's smaller or un-clamped), or the drill will violently twist in your hand, requiring that you reverse the drill to extract the bit. Even in a drill press, while very cautiously taking small bites, if you're not extremely careful and clamp the workpiece, you may experience this problem.If you do any work with smaller pieces, I'd stay completely away from these. I guarantee you will have multiple unhappy surprises.Further, once they bite in, they often rip and tear the exit hole, leaving a very messy looking job.I can't say this strongly enough: if you care about doing clean, controlled work, these ARE NOT the drill bits for you! | 0negative
|
Good stuff, works well, easy to apply
I live in MN and have an older house. One of the windows I have not replaced suddenly wouldn't close all the way no matter what I tried.I used this stuff to caulk approx a 1/8in hole all the way around the window a couple of days ago (had ice on the window etc). It seems to have cured great despite the cold air and some melting ice water getting on it. The draft is sealed and the window isn't leaking air anymore....so far this stuff is working great.If I could give it a 4.5 I would, it says clear but hazy is more like it (I gave it a 5 I'm certainly more worried about performance then looks), still great stuff and I'm impressed with it. | 1positive
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
exceeded my expectations
These cobalt drill bits are great! Regular titanium coated bits or carbide bits do not compare with cobalt bits, at all. With these I was able to drill quickly - really quickly - through steel that was dulling my titanium bits, even with oil. It's always best to use a couple drops of any oil when drilling to keep the temperature down and avoid wear. You will not be disappointed with these bits. | 1positive
|
Comfortable!
These are the most confortable sandals i've ever worn! They are super durable. Wouldn't get anything other than reefs. Also look into their bottle opener sandals! | 1positive
|
All Glass Aquarium Sealant
The Sealant worked just fine. It sealed the 150 Gallon Fish Tank with no problems. I sealed my fish tank with no problem. | 1positive
|
horrible
I tried 2 of these products and both of them failed within 5 minutes. The hex chuck is magnetic and can not withstand normal drilling. It broke both times. A very poorly engineered tool. | 0negative
|
Quality...
There's not much to say about o rings, unless they don't work. However, these are just fine. They appear to be well made and true to size. If you need them, buy them without worry. | 1positive
|
Not good.
So I bought this vinyl tape thinking it would stick to vinyl siding. Well, it didn't. Not even a little bit. This tape practically ran away screaming from the vinyl I tried to stick it to. You might need some of this tape on a tropical island to bandage a broken leg. As long as your leg isn't made out of vinyl. | 0negative
|
Lasted one year...
Bought them for my honeymoon. They are comfortable! However the strap that goes between the toes came loose and then broke apart. I was running while wearing them, but still disappointed that they fell apart this quickly. Wore them about twice a week for a year. Also the soles started to show cracks and creases several months in. | 0negative
|
Doesn't Work
This is a bad product. The device needs recalibration at every stage and even then refuses to give an accurate reading. I am going back to the classic vernier caliper. | 0negative
|
Longer than the advertised 14"
I had bought one a month prior and thought I would get one for my other arm, which I did, but while the 14" size was perfect with the first one, when I received the new one tonight even though the packaging had the same model # and I can't find a longer G&F model on Amazon, it is 18" long and too long for my forearm. I guess I will contact Amazon on my options. | 0negative
|
o rings
I'm always running for o rings for something now I have a stock at home. | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Remington 1100
Used to replace broken o-ring on a Remington 1100 12 gauge. Product fits perfectly and is of very high quality. At this price you basically have a lifetime supply! Highly recommend! | 1positive
|
Warning - wrong item!
Be careful! I've bought this stuff a month ago, but they sent me totally different item. Different brand, color of glove, different color of rubber, different kind (and quality) of rubber. On the picture it looks like- nice fancy gloves. But what you get- is very cheap, streaky-rubber,bad quality..I've been purchasing similar gloves for a 14 years, and this one was my worst deal ever... I did not like it at all, and returned it. But when I contacted a seller, they disagree - that it is different item.Finely I've got a refund (not a %100, they probably charged me for shipping). And I am OK with that, I just don't want to deal with them any more... | 0negative
|
Really good quality a lot less expensive then the stores
I was so happy when I found these flip flops for so cheap. I looked around the malls and searched store to store and found nothing close to this price. I bought them for my boyfriend and he absolutely loves them. He wears them every day. I am so happy. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Never going unseen again!
I often bike late at night, and I have tried many methods to make myself seen (EL wire, wheel lights, cree headlight, etc). The more angles you can be seen from the better, so I plan to put this on the sides and back where the headlight is less visible. This is a very cost effective option, requiring no batteries and covering a large area. For those who wonder why they can't see the effect when testing it, try putting the light source nearer to your eyes. This tape is designed to reflect back toward the light source (aka: the car/driver) so it won't reflect much light in other directions. It's directional, like a mirror. Anyways, glad that 3M sells it. This will be a great addition to my bike. | 1positive
|
Some one is reading these reviews.
I am displease the Amazons customer service. all I'm asking is that someone help me with the matter.678 983 5360 or ericlandress@gmail.com | 0negative
|
More useful than I thought - GREAT VALUE
I bought these tension poles solely to support plastic draping to contain dust. But I found them incredibly handy when I needed to hold up a fixture while the adhesive cured (1 week!) and they even helped keep a dropcloth in place while I painted.They are very well made and although no instructions were included... very easy to figure out.Rugged, well made and easy to use. Wish I had found these years ago! | 1positive
|
Gracias por el envío
Muchas gracias, el calibardor me pareció fabuloso, es una herramienta que me servirá bastante en mi labor como profesor de matemáticas | 1positive
|
A$$ muncher
I bought this item with good intentions, I was going to build a warship to wipe out the entire ginger race as a way of preserving the future of mankind and destroying the ginger gene once and for all!Unfortunately I left it by my bedside and my boyfriend sebastian ashanti rodriguez II thought it was lube. After rubbing all over my sweet a$$chen my sphincter turned inside out and my hair became ginger! Now sebastian wont even look me in the eye let alone make love to me.four stars | 1positive
|
Screwed
They were the correct item but only 57 in a box that should have contained 100. The 5/32 drill bit was absent. In the end they cost me more than if I would have purchased them locally. I reccomend that you not trust this seller. | 0negative
|
Kinda dissapointed
Received the GENERAL 1436 6-inch Digital calipers for fathers day. Nice setup with the box and all. Opened the packaging and the digital readout wouldn't work so I tried the spare battery that came in the case, NOTHING!!My fiance asked Amazon for a replacement and it was here FAST.Opened the packaging and as before, no digital readout!!!I tried the spare battery in the case and FINALLY a digital readout. So basically 1 battery out of 4 worked so I guess I got screwed out of a spare battery. | 0negative
|
Not Great Against Thor
I purchased this product in order to eat it and use the radioactive powers gained to rob a local bank, bringing me into conflict with my nemesis, the thunder god Thor. By the time it kicked in, it was 4:50 and by the time I got over to the bank in the Decatur Street traffic the furgin bank was closed. I tried to melt my way in but no go and my stomach was starting to hurt. I turned to the heavens and screamed out, "ThoooOOOORRRR!!!" And I thought the clouds parted but I guess not. So I got in my car and drove over to, well, it was going to be Denny's but I quickly realized that the emergency room was a better bet. The doctor there didn't know how to summon Thor and honestly, I was not really up to fighting him by that time. My midsection was purple as a eggplant and I had about a thousand IV tubes in me. Anyway long story short, I died, and I found that none of the religions really got it right. No light or tunnel, no old guy with a gray beard, no reincarnation. It was like one of those long anterooms at a movie theatre when you superhave to take a leak. I looked around all over for Asgard and it took like, six months to get there and, long story short, Thor wasn't even there. You may want to try the [...] douche syringe instead. | 0negative
|
Used for loading aircraft. 4 hours per night
These were good for a month before they were no longer waterproof. I found my hands Soaked and freezing. They do not keep my hands warm in 20 degree weather. The only good thing about them is their dexterity. | 0negative
|
It's great, I use it as a bracelet-wristband!
GREAT PRODUCT, HIGHLY RECOMMEND IT!, GREAT GREAT GREAT THING YEAH! GREAT THING YEAY!GREAT PRODUCT, HIGHLY RECOMMEND IT!, GREAT GREAT GREAT THING YEAH! GREAT THING YEAY! | 1positive
|
Works better than the original!
I purchased these O-rings for replacing the drive belts for a rod dryer (fishing rods). They're stronger than the originals! | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Been Lookin For These at A Good Price Finally Found Them
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
works as advertised.
Works as advertised. I'm sure glad I got this item to lift wood and drywall. I don't always have the luxury of someone helping me lift or move. | 1positive
|
Dribble-proof a 750 ml Nalgene bottle
My favorite Nalgene 750ml bottle had turned into a "dribble" bottle. This ring is the correct size to fit over the neck and seal against the cap when the cap is screwed on. Not perfect - when you unscrew the cap, a little water that was sitting above the ring will drip. But I'm not getting dripped on when I drink. | 1positive
|
Long Overdue
First let me say this is an absolutely excellent product. I finally know the exact salinity of my tanks in seconds. There are some great things that come with this Refractometer that are not mentioned in description. It comes with a little bottle of distilled water as well as a mini flat head screw driver to calibrate before your first use. It also comes with a nice mini microfiber cloth to wipe the prism between uses. This is by far the most accurate way to measure the salinity of your tanks water and I can assure you that you will not be disappointed. | 1positive
|
It's great, I use it as a bracelet-wristband!
GREAT PRODUCT, HIGHLY RECOMMEND IT!, GREAT GREAT GREAT THING YEAH! GREAT THING YEAY!GREAT PRODUCT, HIGHLY RECOMMEND IT!, GREAT GREAT GREAT THING YEAH! GREAT THING YEAY! | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Supurb small tap wrench
Starrett 93A tap wrenchAs with most Starrett products, this one is absolutely first rate.I bought this to replace a 50-year-old Millers Falls tap wrench of the same size. The Millers Falls wrench jaws were an integral part of the wrench body and was designed to bend inward to hold a tap's base when the knurled knob was tightened. Eventually, that bending caused one of the jaw sections to snap off.This Starrett tool is a much better design, as the two jaw halves that hold the tap are separate forgings, with a spring holding them apart. It securely holds the very smallest taps -- from 1/16" to 3/16" square shank. The handle rod, needed to provide turning leverage, is pushed into the wrench against a small spring -- which keeps it from moving much, unless you want it to. It's easy and fast to slide the rod out of the way when necessary - much faster than rods that are held in place with a set screw.The price of this wrench is much higher than other tap wrenches, but if you want the very best, this is the one to get. The design and manufacture of this Made in the USA tool is outstanding. Highly recommended. | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
021 Viton O-Ring
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
Causes Cancer!
I ordered this for my sister due to her love of duck tape and i thought this would make a great gift.Well, once it had arrived the front label said that it contains chemicals that are proven to cause cancer.So we just threw it out and were dissapointed with its ability to give us life threatening disease and called it a day. | 0negative
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
Quality...
There's not much to say about o rings, unless they don't work. However, these are just fine. They appear to be well made and true to size. If you need them, buy them without worry. | 1positive
|
Sturdy & modern looking
It is currently holding about 20 hangers of clothes (not that it ususally does, but it has been these days).My only issue is that, in hindsight, I would prefer a longer design..almost like a horizontal rack so I can sift through a few items or let more than 1-2 items "dry out" at the end of the day. This design is not as conducive to what I actually wanted to accomplish, but I should have realized that.Otherwise it is a well-made product. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Awesome!
These sandals are just as better than my last pair of Rainbows at half the price. They look and feel awesome, and they are super comfy. The fit is exactly the same as a nike running shoe. | 1positive
|
solar boiler parts
excellent price and good delivery. the item will be used to seal pyrex glass tubes used for a solar boiler to create steam. | 1positive
|
Non Returnable - Does not match with the 501B series
I bought the wrong type. Guillens took it back but I had to pay for extra delivery and return (shipping and handling). Then I bought the right style directly from Guillens. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Triplett True RMS AC/DC Clamp-On Meter
I needed to replace an antique R.S. multi-meter, at the same time wanting to expand my amperage measuring capabilities. I just inherited a diesel truck with some cold starting issues, and this meter seemed a good partner to tackle the job.The AC/DC amp ranges are 400A and 1000A and the hold feature allows you to clamp it in place, energize the system under test, then read the peak. Glo-plugs can be corporately and individually tested to compare for benchmark differences, helping to determine if all are working, and working together properly. Alternator output current measured during idle in loaded and unloaded conditions. Battery output current measured during glo-plug initiation, and then start up sequence to quantify the delivery of the Cold Cranking Amps that the batteries are rated for. (They should deliver at least half of the individual CCA rating for 15 seconds or be replaced.) When the engine starts you can see the reversal of the current flow and measure the rate of current going back into the battery, indicating whether it is properly recharging the batteries. My diesel system has two batteries connected in parallel and the DC amp-clamp helped to determine if both were contributing equally to the starting sequence, and receiving re-charge current equally. This helps to quickly determine if one battery is weaker and the other is doing more than it's share of the work, or resolve wiring & connectivity issues.The meter comes with a set of test leads that are PVC, but still remain reasonably flexible down to 10 deg. F (coldest I've had it). AC amps readings seem very accurate - when testing a CF bulb stamped 390mA AC that's exactly what it read (with the help of a X10 line separator - which multiplies small readings like this to 3.9 amps so the meter can read it). The temperature in the room read two degrees higher than the thermometer on the wall, probably right, cold day = cool wall. Voltage readings are right on what you would expect (new "AA" battery 1.625 Vdc) (Wall socket 117 Vac tru-rms) (Hertz in the wall measures 59.99 Hz). The Ohms scale corresponds well within tolerance while measuring 5 or 6 precision (1%) resistors I keep in my supplies. Capacitance also works well matching several caps I keep around. Continuity is indicated at measurements of less than 30 Ohms. Diode check shows the forward bias voltage and indicates "OL" when reversed.The back light on the display is useful in anything less than full daylight, which is when you need it. Display is large enough to read easily and the selector knob has an "OFF" position at both ends of the selection range, so you can go to whichever your closest to. Meter has a powerful enough spring in the clamp to easily hold it's own weight and more, when clamping it and walking away to energize the part under test, and then returning to retrieve the measurement.It came with a padded vinyl carry case, test leads, K type temp probe, 9V battery, and instructions.I like this meter even more after working with it for the last several weeks and now have a good starting diesel to show for it, already paid for itself in savings! Thanks Triplett! | 1positive
|
Fantech Booster fan Lint Trap does the job, but the door is a pain
I just finished a few loads of laundry after installing all new dryer ducting, a lint trap and Fantech booster fan (the system works VERY well). After every load the lint trap needed to be cleaned. OK, it's doing it's job. However, taking off the door involves pinching the spring retention clip, cleaning the screen then reinstalling the spring clips in very small hard to see holes. The spring clip is awkward and the screen is poorly adhered to the metal housing (after 2 loads it's already coming loose). Also, the Fantech Lint Trap housing is very industrial looking (galvanized sheet metal), and doesn't fully recess in a standard wall frame. I'm not sure Fantech could have put less thought into how this lint trap would actually fit into a laundry room and be used. It needs to be cleaned often, which will likely be the least desirable step in the entire laundry process (including folding and putting clothes away). I am actively looking for an alternate lint trap solution. I am convinced that the lint trap is necessary (the dryer vent isn't catching all the lint), but there must be a better solution out there! (no complaints about the Fan - it's quiet and works perfectly). | 0negative
|
Excellent Value
After purchasing a lower quality product from the local hardware store for about twice the price, I was happy to see Amazon carrying the silicon type of this O-Ring and for a lower price. They are quality products for a great price. | 1positive
|
Inexpensive and durable
I had been going through o-rings on our tube filling machine like crazy. I had to replace it once a week or more often. I decided to order this 25 pack since it was so inexpensive. It's been a month and a half and I have not yet replaced the first one of these. They seem to be extremely durable so far. | 1positive
|
Delayed delivery, awesome Amazon service though!
***EDIT 7/9/12 12:00 PM***Well, I posted this review a couple of hours ago, and also notified Amazon about the issue. Within about fifteen minutes, they issued a refund on the shipping charges, escalated the issue immediately with their shipping department and have a representative monitoring my order until it arrives on my doorstep. All I can say is, WOW! That was definitely not the response I expected, and was very impressed!***Original Review***This is the first time that I've used the expedited shipping option to update my shipping option from 2-day Prime shipping to 1-day shipping, with an additional upcharge. I ordered this product pretty early (08:27 AM Pacific Time) on the morning of Thursday, July 5th, so that it would be delivered by Saturday afternoon at the latest. Here's the actual tracking history (with local cities removed for privacy)July 9, 2012 07:52:00 AM XXXXXXX CA US Out for deliveryJuly 9, 2012 07:48:00 AM XXXXXXX CA US Arrival ScanJuly 7, 2012 05:01:00 AM XXXXXXXXXX CA US Arrival ScanJuly 7, 2012 03:35:00 AM Memphis TN US Departure ScanJuly 6, 2012 01:14:00 AM Memphis TN US Arrival ScanJuly 6, 2012 01:07:00 AM Indianapolis IN US Departure ScanJuly 5, 2012 10:03:00 PM Indianapolis IN US Arrival ScanJuly 5, 2012 09:47:00 PM Indianapolis IN US Departure ScanJuly 5, 2012 07:26:00 PM Indianapolis IN US Shipment received by carrierJuly 5, 2012 09:50:50 PM --- Shipment has left seller facility and is in transitAnd details of the order:Date: Thu, 05 Jul 2012 08:27:01 -0700 11 of 127From: "auto-confirm@amazon.com" <auto-confirm@amazon.com>Subject: Your Order with Amazon.comShipping Details : (order will arrive in 1 shipment)Order #: xxx-xxxxxxx-xxxxxxxShipping Method: One-Day ShippingItems: $12.12Shipping & Handling: $3.99------Total Before Tax: $16.11Estimated Tax To Be Collected: $0.00------Order Total: $16.11Delivery estimate: July 6, 2012 1 "Cold Rolled Steel A513 Drawn Over Mandrel Round Tubing, ASTM A513, 0.75" ID, 1.25" OD, 1/4" Wall, 12" Length"Misc.; $12.12In StockSold by: Amazon.comI'm actually really disappointed, and pretty irritated that I paid extra for what is now four days (not including that actual order date) waiting for delivery on a 1-day shipping item. Granted, this is the first time that I have had any issues with an Amazon stocked item, but four days for next day shipping is definitely not OK. This was a rush shipment and it actually arrived at a shipping facility note once, but twice in the early AM and sat there over night before it was processed again. | 1positive
|
Bad quality from amazon
Normally love Reef sandals and have had great luck with the last 3 pairs purchased locally. This was the first pair purchased from Amazon and after 1 month the sole started to separate - nothing abnormal in the wear. Be careful. | 0negative
|
Good price, good product
Used this to replace my o ring on my BMW's DISA valve. O ring is not available from the dealer. Worked perfectly and solved my vacuum leak. | 1positive
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
not the size advertised
I ordered a 6" x 12" x 1/2" piece of black acetal. I got a 5.8" x 11.8" x 1/2" piece. I'll make it work, but don't appreciate the undersized piece. Guess that's why they call it small parts. | 0negative
|
Shop Vac 5 Gallon Wall Mount
I would recommend the Shop Vac 9520262 5 Gallon Wall Mounted Vacuum to any one that has a garage and cars to keep clean. Easy to install on the wall. Vacuum has great power.Shop-Vac 9520262 5-Gallon 4.5-Peak HP Hang Up Wall Mounted Wet/Dry Vacuum | 1positive
|
Not perfect, but excellent quality, and value.
I can't speak definitively about durability as mine arrived yesterday, but I can speak about my impressions so far. (I may update / add an updated review later on if my impression changes).The box that the bits shipped in appeared well made, however the bumper gizmos that the bits rest on weren't all lined up quite right, and several of the bits on the top right corner don't quite have enough room, where the bits on the bottom right have too much room... Aside from that, and it doesn't really matter with the lid closed anyway as the foam blocks hold everything tight... all was well. My box did not stick to the cardboard like others have mentioned theirs did. With the type of finish that is on this box, I can see how it could stick if not 100% cured. If they get in a rush to run an order out the door, well curing time gets rushed...The bits measured up accurately, or close enough for my purposes. The 1/2" was only shy by .001" which is no big deal. I used the 1-1/16" bit, and 3/4" bit which measured 1.0625 and .75 respectively. (Right on the money).I am replacing a 7 piece Porter Cable set, along with a couple of Freud single bits. The Grizzly bits center point takes a bit more work getting the bit down into the wood, but not anything that would impact accuracy, and most likely would NOT be noticed using these in a drill press instead of a hand drill...Once the bit is started, material removal was fast, and efficient, with shavings coming out of the back side of the bit in nearly hand plane like thin wispy curls.I am happy this set shipped with the plastic protective covers for the heads of the bits. The little extra distance they went to protect the bits is well appreciated.The hex drive bit shanks insure solid, slip free engagement with the drill, or drill press chuck. It would take some work to mess up chucking these up tightly...These bits are typical of Asian produced tools as they are shipped coated in cosmoline, which is easy enough to get off of the bits simply with mineral spirits and a clean rag. I did not read the country of origin statement, but from the quality of the construction, and machining, I would guess these are Taiwan made and not mainland China.This is item #2 from Grizzly for me, and I was hesitant to try them a second time due to the low quality of the first item (a drill press table). But I see so many people that have Grizzly this or that, and are very happy with it. If this bit set quality lives up to my initial impressions, then the drill press table is just a fluke... These appear every bit as good as the Porter Cables, and nicer than the Freuds... And I hate to say that because I have been overjoyed by every bit and blade I have gotten from them... | 1positive
|
viton orings for 6.9 diesel engine.
I ordered these orings to repair my ford 6.9 diesel engine. I used them on the injector leak-off jackets to reseal them. They worked great and were a great deal. | 1positive
|
Great for Remington 1100
I was looking for an o-ring for my Remington 1100 and other places were asking $9 for 1. You get 50 of these for less than that. My great grandkids will still have these o-rings for the gun lol. | 1positive
|
Terrible, terrible product.
I choose to rate this item as 1-star since it came at a much larger size than I wanted. I wanted a 2" ID instead I got a 3" ID which is a ridiculous size bigger, when I check my order it says that I did order the 3" which is completely wrong because I had my measurements all written down when I was ordering. I'd recommend never purchasing from this company since they will not give you the correct item. | 0negative
|
Dreadful!
Dreadful, dreadful, dreadful! I bought these because I was led to believe they were the 'Gold Standard' in flip-flops. The sole started to come away from the uppers within four wearings on the shoe. Buy some other make and forget the hype about this piece of 'shoe'! | 0negative
|
021 Viton O-Ring
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
All nicked up!!!
It looked like somebody dragged it on the road before it was shipped!! Unfortunate for me, I cannot use it!! | 0negative
|
No return
I though I was purchasing 6061 Aluminum tubing with a finish for a bimini top. This tubing has no finish, and was not eligable for return. I would not recommend purchasing any products from this Seller. | 0negative
|
You Get What You Pay For
On two of the three extensions, the spring-loaded ball would NOT compress, and you couldn't attach a socket to it.I tried hammering it, and even put them in a vice, but no luck. That ball wouldn't budge.Chalk it up to experience. | 0negative
|
Precise hex socket makes for a tight fit
Not some sloppy fit, these screws are rough and tough and coarse threaded. Unless the price is abnormally cheap, as it was when I purchased them, I'm sure not many people are going to be reading this. But I will say I have successfully used some of these fasteners. They work as expected. | 1positive
|
Not good.
So I bought this vinyl tape thinking it would stick to vinyl siding. Well, it didn't. Not even a little bit. This tape practically ran away screaming from the vinyl I tried to stick it to. You might need some of this tape on a tropical island to bandage a broken leg. As long as your leg isn't made out of vinyl. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
021 Viton O-Ring
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
Not good.
So I bought this vinyl tape thinking it would stick to vinyl siding. Well, it didn't. Not even a little bit. This tape practically ran away screaming from the vinyl I tried to stick it to. You might need some of this tape on a tropical island to bandage a broken leg. As long as your leg isn't made out of vinyl. | 0negative
|
Lasted about 1 week
We installed this tape on my steps in Southern California (not very difficult weather) and it rained a week later and most of the tape came off. Don't waste your money. | 0negative
|
Not worth the money
My door is loose in the jamb. The heavy duty rubberized seal is shredding, and a newspaper fixit column recommeded this product. It is as thin and flimsy as it looks. I'm probably going to try applying a square spongy seal and putting this on top - but it's by no means optimal. Don't waste your money. | 0negative
|
Great Design, Poor Quality
I got these sandals after trying them on at a store and talking to my wife about hers. She bought her reefs about 6 years ago and they're still comfortable and supportive. I bought 2 pairs of these sandals as they were my every footwear for almost everyday of college. Unfortunately it seems as if the Reef quality has been declining. After buying these sandals I noticed how nice they felt and how nice the leather was. There was a break in period, normal for any sandal, especially leather. Within 3 months, however, the leather layer on the plantar surface of both sandals began to peel up from the layer beneath it. Eventually, the leather had pulled away from the front of the sandals so much that the sandal would droop down and catch the ground when walking, making it easy to trip on stairs or curbs. Also, if you ever get these sandals wet, like stepping into a puddle that gets the leather wet AT ALL, it will pull away from the sandal upon drying. Within 5 months these sandals weren't at all what they should have been, much less 6 years. The current quality is definitely not worth the money. Since then I've tried Rainbows. I've had them for 2 years. Quality is much, much better. | 0negative
|
Dribble-proof a 750 ml Nalgene bottle
My favorite Nalgene 750ml bottle had turned into a "dribble" bottle. This ring is the correct size to fit over the neck and seal against the cap when the cap is screwed on. Not perfect - when you unscrew the cap, a little water that was sitting above the ring will drip. But I'm not getting dripped on when I drink. | 1positive
|
Perfect!
I'm using these for a mixed-media art project. They're VERY durable (tried to break one by stretching it, and it WON'T break), and the dimensions are exactly as described. Thanks! ~G | 1positive
|
An alternative garden auger
I had tried the garden augers and they are hard to use unless the soil is perfect. I needed to plant a huge amount of a ground cover so I decided I might as well try this. It worked perfect, I was not continually having to retighten the auger and it went through the soil like a knife through butter. If you are planting something larger than a vine you will have to drill two or three holes together but this is not a big issue because it drills the holes so fast. The only issue is you must have a 1/2 inch drill so that was an added expense but I purchased a cheap electric so I would not have to worry about running the battery down in the middle of my work. This has worked amazingly for me. | 1positive
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Drills wont last.
Bought these drills trying to drill through "soft metal" as stated on the box. went through 3 drills trying to make one hole. In my opinion these drills are soft metal themselfs. If you want quallity bits buy a differant set. If your going to use them for wood than give them a try. | 0negative
|
Great
I used this to make a couple of Heavy Duty saw horses. Steel adjustable legs and this makes the top. Smooth and flat, very strong but quite light. Easy to clean. Easy to clamp things to the saw horse as well. There were a few nicks on the edges so if you need a crisp clean edge you might have to do a little sanding. | 1positive
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Excellent Value
After purchasing a lower quality product from the local hardware store for about twice the price, I was happy to see Amazon carrying the silicon type of this O-Ring and for a lower price. They are quality products for a great price. | 1positive
|
Sticky Residue
These gloves deteriorate after 2-3 weeks and leave a smeary, sticky residue on dishes. I only used mine for dishwashing, and I do like to use pretty hot water, but these are meant for washing dishes and they should be able to tolerate hot water, right? It's a shame that they have this issue because otherwise, they would be great gloves. The arm length is nice, they fit well, and they are durable as far as not getting holes easily -- but the residue problem is definitely a dealbreaker. I won't be buying these again. | 0negative
|
Beware of the Specs
The specs as shown in the "Brass C260 Seamless Round Tubing" provided by "Small Parts" are inconsistent. For tubing, the "OD" should be equal to the "ID" plus twice the "Wall Thickness". 56 of the 123 entries for round brass tubing are incorrect. You may not get what you expect if you're counting on telescoping different tubing sizes. An example is: 'Brass C260 Seamless Round Tubing, 3/16" OD, 7/64" ID, 1/64" Wall'. One of these three numbers must be wrong. | 0negative
|
The best vacuum for this size!!
I have had ShopVac vacuums before and they never disappoint me. This one it's not the exception. When I received the package I thought it was too small, but as soon as I put it to work it was really up to the task. I vacuum my house and cars with this little marvel and it's enough! Great adquisition for the price and size! However I have not used it for wet spills, just dry and regular dirt and dust at home, carpet, curtains, sofas, etc. All in all great purchase! | 1positive
|
Terrible, terrible product.
I choose to rate this item as 1-star since it came at a much larger size than I wanted. I wanted a 2" ID instead I got a 3" ID which is a ridiculous size bigger, when I check my order it says that I did order the 3" which is completely wrong because I had my measurements all written down when I was ordering. I'd recommend never purchasing from this company since they will not give you the correct item. | 0negative
|
Viton O-Rings
Fast service and product as described. Fits an old Remington 1100 perfectly at a fraction of the cost of Remington replacements. That's about all - they are just O-rings. | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Good straps
Got them in the mail today too bad they were open and already used still good straps kind of disappointed though | 0negative
|
This vise is un-finished and unuseable
Based on the price and reviews here I ordered and just received this vise. The size and weight are impressive, but this product is shipped un-finished and unusable. There is some major machining that should have been done on 3 key pieces to make this a useful product, plus it should include a handle.1> The primary mounting plate is cast really warped - about 3/8" from end to end. It should have been surface ground. As supplied you cannot mount it flush to a surface without putting spacer washers under all mounting points to try and level. If you do not, and tighten your mounting hardware down you will just crack the plate - 'cause cast iron does not bend - at all.2> The front jaw plate is also cast with a warp in it. It has a distinct curve - across it's 9" width it's got at least a 1/4" bend in it. Should also have been surface ground.3> The cast handle should have been drilled out. It was designed to hold a 1 1/8" dia. wooden handle, but the out-of-round hole is full of rough casting iron - there is no way even a 1" handle fits through there. It should have been drilled out, but I had to spend several hours with a dremel tool (do you have a 1 1/8" drill bit laying around?)grinding it round from the inside out.4> a wooden handle should have been included. Surpisingly Grizzly does not even offer one for sale - I had to order it separately from Lee Valley. What a pain. (or make your own)5> The green paint is really cheap - expect it to wipe off onto your hands.On the plus side - all the parts they bothered to machine are fine: the main steel screw is well made and really heavy duty, as are the steel guide rods. All align well into the main plate. But - they should have put about 50 cents more Chinese labor into this to do a bit more machining, and included the wooden handle. They could then charge $39.95 and it would be a truly great value. But as it is shipped now it is unuseable. I guess you do get what you pay for, but knowing the questionable quality of some Asian made goods you would think that Grizzly wold demand better for something that they are putting their name on. | 0negative
|
Cheap but useful
These calipers are really great for just around the house but they are cheaply made. I didn't pay very much for them so that would explain it but they work well and come with a decent case! | 1positive
|
False advertising
This item only seals gaps 3/8" not 7/8" as advertised. I never would have bought it if it was advertised correctly. Very disappointed with Amazon recently. | 0negative
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|