text
stringlengths 70
7.86k
| label
class label 2
classes |
|---|---|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Gaff Tape Review
So i got this gaff tape because it had good reviews and the reviewers said it was actually Gaff tape unlike some other products available. It is in fact gaff tape with a fabric mat black finish. It is a little cheaper quality wise then other gaff tape I've used and that is why i gave it 4 stars. It seams a tad thinner and the adhesive doesn't seem to stay on the fabric backing as long as it should. It is still quality tape and I wouldn't hesitate to use it on the XLR and DMX cables. I wouldn't keep it on the cables for longer then 10 days. Then a residue will most likely form. It's still a far better option then any other tape for stage work. | 1positive
|
Great O-rings and Great Price
O-rings were top quality, exactly as pictured. Prices are great for only a 10 pack. Exactly what I wanted and expected. What more would you need? | 1positive
|
much cheaper than dealership and works just as well
I bought this part to use on the fuel pump plate of my bmw r1150r. I think it's also the same part for 1100 too. It works just as well at fraction of the cost quoted by dealerships | 1positive
|
The hardware store said I couldn't buy these
Just what I needed to fix my pool fill valve. 25 is a lot but now I'm covered. | 1positive
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
solar boiler parts
excellent price and good delivery. the item will be used to seal pyrex glass tubes used for a solar boiler to create steam. | 1positive
|
Great O-rings and Great Price
O-rings were top quality, exactly as pictured. Prices are great for only a 10 pack. Exactly what I wanted and expected. What more would you need? | 1positive
|
Works for Geo Metro Distributor Seal !!!
Yes, this is the one you've been hunting, and yes, my 91 geo 1.0 quit leaking from there. What to do with the extra nine? Well, I don't know either, but its hard to beat the price!!! | 1positive
|
No issue here
Just standard O-rings. They work great for 5-gallon soda kegs used for home brewing. With the 100-pk, I won't have to buy more....ever. | 1positive
|
Too many rings in a pack
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
Good price, good product
Used this to replace my o ring on my BMW's DISA valve. O ring is not available from the dealer. Worked perfectly and solved my vacuum leak. | 1positive
|
All nicked up!!!
It looked like somebody dragged it on the road before it was shipped!! Unfortunate for me, I cannot use it!! | 0negative
|
very good quality at very good price
Very good quality, it cames with a box, extra battery, and runs very well either in cm and inches... very good choise if you will use it as hobby. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Good product
Fabric strength is sufficient (does not tear easily) and it appears to be good for its intended function, i.e. wrapping around perforated drain pipes to prevent silt from seeping in and plugging the pipes. I did not award 5 stars because I would have used a wider roll (6 ft would have been ideal) if it had been available. I buried the pipes in crushed stone and wrapped the fabric around the outside of the stone layer to allow for better drainage. At 24" the fabric was not wide enough and so I had to overlap 3 runs for complete coverage. Other than that, very happy with the results. Drain worked great during last rain storm. | 1positive
|
Excellent Value
After purchasing a lower quality product from the local hardware store for about twice the price, I was happy to see Amazon carrying the silicon type of this O-Ring and for a lower price. They are quality products for a great price. | 1positive
|
Compatible with 1998 Toyota Tercel door latch
I used this screw to fix my car door latch when one of the originals fell off. It fit perfectly and held up well over the winter. | 1positive
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Good Product
This copper bar will be just what I need to fabricate a custom battery disconnect terminal to hide under the rear panel of my 928. | 1positive
|
Not Sharp!
These things are hopeless! The Chinese don't even bother to sharpen off the paint on the edges. The steel is soft. They are easy to sharpen with a file - as long as you do it frequently. This design has no spurs - just a single dull cutting edge. They will bore a hole but not cleanly. | 0negative
|
Bits are Bent right out of the Box
Several of the bits in the set I received are warped or bent, such that the point oscillates visibly as the bit rotates in a stable chuck. They do make holes, but are useless for precise work because they tend to drill oversize and it's difficult to control the exact location of the hole. | 0negative
|
Two Right Feet
What can I say? This box held shoes for two right feet.And the surface of the shoe is a soft brown -looks like a coating that will rub off on the soles of my feet. | 0negative
|
021 Viton O-Ring
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
Two Right Feet
What can I say? This box held shoes for two right feet.And the surface of the shoe is a soft brown -looks like a coating that will rub off on the soles of my feet. | 0negative
|
mine broke immediately
mine broke after just a few uses. the shaft broke off right where it joins the actual core. it had been used only a couple of times. the teeth look brand new. it says made in Germany so I assume this is just a bad luck situation. when you look at the broken shaft it is obvious there was a defect in the metal.I bought another and so far it has not broken. | 0negative
|
Comfortable, Stylish and Durable
These flip flops are divine. The name isn't misleading at all--the footbed is as smooth as can be. The straps are short enough that your feet don't really "flip" or "flop" when walking, and durable enough that they don't stretch. I have been complaining about stretching issues with reefs for years, but these don't have that problem. Overall a great buy.Note: I wear a woman's size 10 and bought these in a man's size 8. They fit great. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Great Stuff
1. Shipping seemed a little much, but then again how else would you ship a sheet this size for a quick delivery and undamaged. (Great Job)2. Beautiful metal I'am not an expert,but it's what I was looking for in my project. (Great Metal)3. I'm very happy with my project, and would reorder from this supplier again. (Great Work) | 1positive
|
Quality O-ring
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
Much-needed replacement!
My husband takes a Thermos travel mug of coffee with him every workday, and the o-ring was very stained. I also figured that eventually it would relax and no longer provide a tight, leakproof fit. I thought finding a replacement would be impossible, but, when it looks impossible . . . try Amazon! Found these, which are the exact size as the original. We're set for a long time, now! | 1positive
|
bit holder
this bit lost it's ability to hold bits way to soon after purchase. I do not recommend it. | 0negative
|
Terrible, terrible product.
I choose to rate this item as 1-star since it came at a much larger size than I wanted. I wanted a 2" ID instead I got a 3" ID which is a ridiculous size bigger, when I check my order it says that I did order the 3" which is completely wrong because I had my measurements all written down when I was ordering. I'd recommend never purchasing from this company since they will not give you the correct item. | 0negative
|
All's right with the O-Rings
The o-rings are as described so what's not to like. The price is reasonable and they arrived within a week. I'll try this source again when looking for small parts. | 1positive
|
much cheaper than dealership and works just as well
I bought this part to use on the fuel pump plate of my bmw r1150r. I think it's also the same part for 1100 too. It works just as well at fraction of the cost quoted by dealerships | 1positive
|
Wasn't sticky enought for my application.
I needed a brown tape to accent older aluminum framed windows... to make them look less bland, until they're replaced. :)The pros:+ Reasonable price which includes free shipping.+ The Brown color I wanted.+ 1/2" width.The cons:- This tape isn't very sticky & it won't stay stuck, unless the surface is perfectly flat. Forget about it staying down if there are bumps or dips on the surface. :( | 0negative
|
Silicone is nice over rubber
I really like these instead of the rubber ones I replaced them for. I would do this again since silicone is forever | 1positive
|
No issue here
Just standard O-rings. They work great for 5-gallon soda kegs used for home brewing. With the 100-pk, I won't have to buy more....ever. | 1positive
|
Been Lookin For These at A Good Price Finally Found Them
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
Beware of the Specs
The specs as shown in the "Brass C260 Seamless Round Tubing" provided by "Small Parts" are inconsistent. For tubing, the "OD" should be equal to the "ID" plus twice the "Wall Thickness". 56 of the 123 entries for round brass tubing are incorrect. You may not get what you expect if you're counting on telescoping different tubing sizes. An example is: 'Brass C260 Seamless Round Tubing, 3/16" OD, 7/64" ID, 1/64" Wall'. One of these three numbers must be wrong. | 0negative
|
Beware of the Specs
The specs as shown in the "Brass C260 Seamless Round Tubing" provided by "Small Parts" are inconsistent. For tubing, the "OD" should be equal to the "ID" plus twice the "Wall Thickness". 56 of the 123 entries for round brass tubing are incorrect. You may not get what you expect if you're counting on telescoping different tubing sizes. An example is: 'Brass C260 Seamless Round Tubing, 3/16" OD, 7/64" ID, 1/64" Wall'. One of these three numbers must be wrong. | 0negative
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
I love these Command hooks!!
These Command Medium Hooks are so handy and easy to use. They really do stick on the wall, they seem to be very sturdy holding things up. I got them at a great price and they really came fast!! | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Leather comes away from the soul
Hate to be the bearer of bad news, but the leather peels up away from the soul at both the toes and heels after only a few weeks of use. I'm going to have to shoe goo these bad boys and hope for the best. | 0negative
|
Stainless Steel (316) Bar 1/4 x 1 1/2 x 12 as advertised for $13.16
If you know what grade 316 stainless is and are familiar with its proffered and how to machine it,all I can say its they delivered what was promised without any problems: an unpolished rectangle/flat bar 1/4" thick, 1 1/2" wide, 12" long for a little over $13.00.For background stainless steel 316 is one of the most corrosion resistant of all the common "austenitic" (any grade of stainless in the 300 range) stainless steels. It is sometimes called marine grade stainless because it resists corrosion even in the presence of saltwater. It is often called A4 stainless on metric sized fasteners.If you plan on using this for a project requiring machining -- like drilling or milling -- keep a couple things in mind:1) Don't even think about trying to drill without coolant. If you value your drill bits life, use LOTS of it, literally keep flooding the area with coolant from start to stop. If you don't have any real coolant, try regular olive oil.2) You can drill this with high speed steel drill bits, but cobalt bits will last longer because this process generates heat that cobalt can deal with better than high speed steel. If possible use a drill with an angle around 135 and if you can use a shorter "screw machine" or "stub" length drill rather than the standard "jobber" length.3) Drill a with lot slower rpm than you are used to for regular steel or (especially aluminum) and keep the pressure on. If you need to disengage from the cut, pull it back completely out of the hole immediately -- never let the drill just stay rotating in the hole without a good bit of pressure applied. It is much easier to do this on a drill press or mill than with a hand held drill because you can maintain pressure without flexing the bit (which can cause it to snap) more easily on a press.4) Make sure your bits are SHARP. Don't even bother trying if your bit is the least bit dull or worn.5) You can do this even if you've never machined/drilled a significant hole in a real metal before -- I first learned about metal cutting using Titanium 6al4v, which is a lot like this material as far as drilling / milling strategy goes. I never understood why people said it was so difficult to machine until later when I worked on mild steel and aluminum -- if you're used to those metals or try to machine this like it is those metals, you will likely be quite frustrated.6) This product comes unfinished (scratchy). If you want it to look half decent, use a disc or belt sander, start at 80 grit and work your way up to 400 to 600. It should look pretty decent by then. If not, move on to buffing with buffing wheels and appropriate compounds.I hope this provides a decent review of my transaction, plus what this stuff is used for and what to do with it so people can decide whether its appropriate for whatever project they're working on. | 1positive
|
Fits Omni Heavy Duty Whole House filters
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Quality O-ring
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
Too many rings in a pack
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
much cheaper than dealership and works just as well
I bought this part to use on the fuel pump plate of my bmw r1150r. I think it's also the same part for 1100 too. It works just as well at fraction of the cost quoted by dealerships | 1positive
|
viton orings for 6.9 diesel engine.
I ordered these orings to repair my ford 6.9 diesel engine. I used them on the injector leak-off jackets to reseal them. They worked great and were a great deal. | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Greenfielf Tap
I ordered A Greenfield Tap but got some other mfg that was made maybe in China. I would not recomend using this site for anything since they show one mfg and ship a different mfg. | 0negative
|
Handy in the Hunters backpack
I wanted something to prevent cuts while processing wild game in the woods. These are great for that. I would buy these again. | 1positive
|
1 of every 4 defective
I normally do not write reviews for items, but, I was so dissatisfied with this product that I felt I should warn others of the quality. I purchased a package of 100 screws, and I am glad that I had plenty extra. I ended up throwing away 1 of every 4 screws. I discovered 2 problems with the screws. The first is that the threads are bad on some of the screws and would not thread into the #8/32 bolts I have. I know it was the screw because another brand I purchased (shorter length) always threaded with no problems. Also for a good screw in this batch they also threaded with no problems. The second problem is that the hex head is not a consistent size. some heads would not accept the hex key in them, being to small, others fit just fine.Good price, but consistent quality is definitely an issue. | 0negative
|
Good price, good product
Used this to replace my o ring on my BMW's DISA valve. O ring is not available from the dealer. Worked perfectly and solved my vacuum leak. | 1positive
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
Quality O-ring
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
oyster gloves
Flexible, strong- perfect for shucking oysters. 4 stars only because wrist cuff could be a bit higher. Husband loved it. | 1positive
|
Extremely poor - pulls paint edge, ruins finish, and bleeds underneath
This review is being written 12/2/2012 for 3M ScotchBlue Painter's Tape, 2-Inch by 60-Yard, 1-Roll, sold by third party vendors and fulfilled by Amazon on their website.I should have known better...I tried this "blue painters tape" from 3M over 10 years ago, ruining a wall. Fast forward to today and the new&improved; tape.First, paint bleeds under the edge of this tape. If I had not used tape at all, it would be a simple task to wipe away the excess with a cloth, impossible now that the paint is dried and tape is removed.Second, when removing, the tape pulls against the paint, leaving a rough edge that will chip later. In this case, it also pulled out some caulking, making a huge mess.The professionals rarely use painters tape, and I can see why. In addition to the two problem above, it is much slower to tape the whole area vs. just paint with a high quality brush that gives you precision at the edges you want to protect.The only use for this tape is to protect areas that are far away from the painting edge, such as to secure plastic drop clothes to areas that may receive drips. | 0negative
|
Fake.
The only thing Huot about this index is a sticker. Huot embosses their logo onto their products. This has a sticker on the inside. Also this is for short drills, not jobber (standard) size. | 0negative
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Some one is reading these reviews.
I am displease the Amazons customer service. all I'm asking is that someone help me with the matter.678 983 5360 or ericlandress@gmail.com | 0negative
|
Spray Malfunctioned
Tried to return but vendor told me how it was against the law to return. Product was not reliable on consistence basis. | 0negative
|
Not Sharp!
These things are hopeless! The Chinese don't even bother to sharpen off the paint on the edges. The steel is soft. They are easy to sharpen with a file - as long as you do it frequently. This design has no spurs - just a single dull cutting edge. They will bore a hole but not cleanly. | 0negative
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Also wrong alloy
One might assume that Amazon could correct problems after poor reviews.I just received 6063 square tubing when I ordered 6061.Amazon, please either train your stockers and/or correct your parts labels.And, as the previous poster stated: 6063 is NOT 6061. | 0negative
|
Works better than the original!
I purchased these O-rings for replacing the drive belts for a rod dryer (fishing rods). They're stronger than the originals! | 1positive
|
classic bait and switch
I must admit that this is the first time I've been really disappointed with an Amazon product.I would have ignored it, except that even in the boiler-plate request for me to "rate this product", it appears as a set of three gloves, as it did in the initial hustle.Be warned that you will not get three gloves, but only one.My stupidity, but when I see more than one of a product being sold I---silly old me---assume that's what being sold.I'll still use Amazon. Stanley, on the other hand..... | 0negative
|
Fits Omni Heavy Duty Whole House filters
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
Been Lookin For These at A Good Price Finally Found Them
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
Fits Omni Heavy Duty Whole House filters
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
solar boiler parts
excellent price and good delivery. the item will be used to seal pyrex glass tubes used for a solar boiler to create steam. | 1positive
|
Total garbage
Worst quality endmill Ive ever seen. Probably fine if youre using it to cut styrofoam or something. Used to take some light cuts on aluminum, 3" DOC, 7500 RPM, .010 stepover, 60IPM, and the thing exploded. | 0negative
|
DO NOT USE FOR CONNECTING TWIN BEDS
Amazon suggested these when I bought a foam connector for twin beds. Do not buy them to connect two twin beds. They are not long enough and the metal clasp would be very uncomfortable on a mattress. | 0negative
|
021 Viton O-Ring
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
Scent
This has got to be the best Antibacterial hand soap I have ever used. It works well as a soap. I think the thing I like best is the Scent. It has a clean, crisp, sent and smells like a hospital. | 1positive
|
9" O-Ring
This was a perfect size for what I needed and just as you would expect an O-Ring to be!!! I used it as a drive belt. | 1positive
|
High temperature performance is outstanding!
I am a flashlight freak. Also known as a "flashaholic". I spend an inordinate amount of time and money not only buying high end flashlights, but I also do extensive modifications in a feeble attempt to reach an unobtainble goal - the perfect flashlight. One of my projects began with 6 volt lantern. I made my own battery pack using four 14AH Tenergy NIMH cells. I built a charging circuit into the light. And the last step was to use a P60 LED light module in place of the regular 6V bulb. (You can learn more about P60 modules at candlepowerforums.com - "CPF" - but don't blame me if you end up addicted). The only way I could secure the P60 module was to use hot glue. But the P60 module runs so hot that the hot glue softens after only a minute of use. This project went back on the shelf until something better came along, and it has! I didn't even remove in ineffective hot glue. I simply "glopped" a bunch the Loctite All-Temperature Adhesive on top of it and let it dry for 24 hours. The result is amazing. I can run my light at full brightness for an hour with absolutely no sign of the Loctite material losing it's grip. And, while not the subject of this review, it's remarkable the P60 module survives, as it is meant to mounted in a body designed for it, which provides plenty a heatsinking. No heatsinking here, it is operating in free air. I'm getting close to the perfect flashight now - lots of light and lots of run time. Now I just need to figure out how to shrink this down to the size of an AA cell. | 1positive
|
good stand-in for nissan coffee mug seal
I bought these based on the recommendation of a previous reviewer. The seal on my Nissan 14oz Leakproof Insulated Travel Mug broke when I was washing it, and without the seal, it wasn't leakproof. These work great. Thanks, previous reviewer! | 1positive
|
Cheap material
This tool is made of cheap material and never work or extract tripped screw. I have tried so many times and eventually have to buy different brand tool to make my work finished | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
As described
These washers are the washers in the picture and function as such. Really not much to say other than they are as described. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Great Stuff!
While I can't speak to the claimed 50-year life of this product, I really like the way it works. Super flexible and strong... and paintable! I've been using this on a metal roof installation, and the times I've missed a bit of squeeze-out and come back to find it set up, it's been nice to be able to just dab it with some touch-up paint. (Yes, I inadvertently bought the wrong "color". Intended to get the clear, but since this is paintable, it's been no problem. :-)) | 1positive
|
Great Product, Easily hung 4 Bicycles with room to spare
My main goal was to mount 4 bikes into a relatively small storage space in our apartment. I looked online for bicycle dedicated ceiling hanging or wall storage systems but did not really see one that stood out as versatile as the Rubbermaid product. I purchased the long rail (84") and 4 bike hooks for around $60 at Lowe's.Installation was straight forward. I measured where the bikes would approximately hang, allowing for proper ceiling height to place bike in the hooks, and then mounted the rail.This does require the ability to find wall studs, as a drywall or wall board only installation would limit the weight carrying capacity of the system.For the 84" length rail I installed, I located 6 studs (using two screws each) and then used good quality drywall anchors for the midway point between studs, per the instructions, a total of 12 mounting points.I plan on buying one more universal hook for a ladder to complete the system.A simple and versatile product that I would recommend and use again. | 1positive
|
Some one is reading these reviews.
I am displease the Amazons customer service. all I'm asking is that someone help me with the matter.678 983 5360 or ericlandress@gmail.com | 0negative
|
Good stuff!
This adhesive is great! It holds very securely and bonds quickly. It's not a very big bottle. But then again, it doesn't take much of the product per use. It will last us a long time - if it doesn't dry up. | 1positive
|
Been Lookin For These at A Good Price Finally Found Them
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
No more cut fingers!!
I do a lot of slicing, dicing, and shredding as the chef of Bill's Grille ([...]). I keep my knives razor sharp, which reduces cuts because the knife doesn't slip. However when I do get a cut its severe. My last injury, while cutting broccoli, cut my middle finger to the bone. I'd had it! I ordered these gloves and was surprised at how good they work. The Kevlar protects the fingers as advertised, but I was amazed at how flexible they are and the grainy surface of the Kevlar allows a good grip on the food. I can shred garlic and ginger closer to the end, saving product. When finished cutting I wash them like I wash my hands with soap and water and set them out to dry. Hygiene comes first. Never again will I pick up a knife without these gloves on. | 1positive
|
Excellent Value
After purchasing a lower quality product from the local hardware store for about twice the price, I was happy to see Amazon carrying the silicon type of this O-Ring and for a lower price. They are quality products for a great price. | 1positive
|
It's Not BLACK!!! It's light grey.
We ordered this because:1. We wanted black.2. We wanted high quality tape.Well, it's not black. It's a very lightgrey. Don't know about the high quality ornot, but if you want black tape, don't orderthis!!! | 0negative
|
O-ring replacement for Thermos Nissan mug
This is a perfect replacement O ring for my Thermos Nissan insulated coffee mug. It fit perfectly and provided a tight seal. | 1positive
|
Terrible, terrible product.
I choose to rate this item as 1-star since it came at a much larger size than I wanted. I wanted a 2" ID instead I got a 3" ID which is a ridiculous size bigger, when I check my order it says that I did order the 3" which is completely wrong because I had my measurements all written down when I was ordering. I'd recommend never purchasing from this company since they will not give you the correct item. | 0negative
|
Too many rings in a pack
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|