text
stringlengths 36
5.99k
| label
class label 2
classes |
|---|---|
this thing is a piece of straight crap, please dont buy it. It's labeled as being 2 3/4" but in reality it is 2 1/2" the chrome is also very dull and smears very easily.' | 0negative
|
As an ASE qualified Automotive Master Technician, I see it again and again. Low grade internal seal material, and a design that uses very small melt marks in the plastic to hold them together. I wonder how many vehicles go every year without a cap and spew 100s of thousands of pounds of hydrocarbon (gasoline) pollutants into the air. I find it so wrong for a company to create a product like this, then become regulated by law because it is such crap, then whine and fight... and LOBBY against rules to force them to make a reasonable product. But then that is what Corporate America is about right. Profits before mankind. Shame on you Stant. | 0negative
|
From the color which wasn't correct to the hold down grommets that were not there, they just didn't even fit. Save your money and don't be disappointed like we were | 0negative
|
WONDERFUL QUALITY, AND PLEATY OF CHAIN FOR ATTACHING FROM THE TRAILER TO THE HITCH.. THANKS BRIAN A | 1positive
|
Description of this product is wrong this is a pack of six In the description but you receive only one It's big time miss leading | 0negative
|
Product arrived on time and was exactly what was described. Very easy to use and to store. I prefer this 3 legged style for the stability in areas that have higher winds. | 1positive
|
The item arrived in good condition and on time. However, when I did the actual installation I discovered the rear visors did not fit. My order clearly stated Mazda Protoge 5 but apparently they sent sent just Protoge parts. Returning was not an option as I had already installed one visor on drivers door. Admittedly my mistake, but be careful and thoroughly check what's been shipped before installation! | 0negative
|
Purchased this bearing packer today. Used the grease gun to fill the container and when I tried to remove the end, it pulled out the grease fitting. Needless to say, screwing metal into plastic is a poor way to make something last. Poor product, would not recommend. | 0negative
|
Jump start batteries are a real blessing and every car or truck needs one - IN the car.This model seems to be a fine and powerful example, but is overpriced because of the docking station. Who need that? Sure it keeps the battery topped up and ready to go, but isn't it a lot smarter to just buy a lesser priced battery and keep one IN each car? If I need a jump start at HOME I can use my wired battery charger / jump starter. When I need a portable jump battery is away from the house. Someone at work leaves their lights on or has a battery going bad, I pop the trunk of whatever car I am in and loan them one of my (cheaper) jump start batteries.I cycle them out of the car every few weeks to top them up overnight in the garage (with the supplied AC chargers) then back into the trunk they go. All of the ones I have owned also include a +12v cig plug so you can charge them in the car while you drive. So just take it out of the back and hook it up and charge while commuting one day a month or so and it will be fine.If you buy this and leave it sitting in the docking station then what are you going to do when your car does not start at work or at the store or when a friend has a problem? You going to get someone to run you home to get this out of the station and go back and do the jump? Use old fashioned jumper cable and risk damage to YOUR car? What if no one is around to help? Going to walk home to get your battery from the dock?This would be perfect for an office or a car dealership or something, but for the rest of us get a less expensive model for each vehicle and keep them IN the vehicle where they will USEFUL at any time day or night.I recently picked up a couple of new Vector 12 AH jump batteries right here on Amazon for $40 each delivered. No dicking station, but I could put new jump start batteries in TWO vehicles for less than the cost of one of these with a station.If the dock station were "free" - this jump battery was competitively priced - then this would be a 4 or 5 star product. Paying a lot extra for the station and leaving this at home would make this a 1 or 2 star product. Overpaying for the station and then putting this in your vehicle would make this a 1 or 2 star product. | 0negative
|
When I tune my motorcycles I use a Wego III AFR meter that I can now interchange between bikes, thanks to this sensor plug kit. The price is great! Everyone else's were so ridiculously high it was crazy! | 1positive
|
My shower is all glass. I had neglected it for a while an was afraid I would never get it to sparkle again. I tried a number of products to no avail. In a last ditch effort I ordered Invisible glass. It worked. It took two tries and some elbow grease, but I now vow to keep it up with this wonderful product. Make sure to read their recommendation for using a soft cloth. As the cloth gets saturated use a new one. Then buff the glass in the end with a completely dry cloth. Sounds like a lot of work.....well worth it when you see the results. Can't wait to do all the mirrors in the house next. | 1positive
|
Very uncomfortable, I found. However, the company gets a star for their helpful return policy. | 0negative
|
I was extremely impressed with the compressor when I bought it. I used it twice and was very happy. On the third use, I noticed a strange smell. I then realized that the part of the power cord where the fuse is (where it's supposed to blow the fuse instead of allowing an electrical problem) was on fire. Fortunately the problem happened in my driveway, not out on the trail. Being stranded by bad equipment is the WORST.The cord is melted through and unless I find a way to take the unit apart to replace the cord, the compressor is completely useless.Very disappointing. I'd look elsewhere. | 0negative
|
we ended up ordering one of them and then the other. the bulb alone was worth it. they went in fine, no problems at all.and they look great. would recommend to everyone. | 1positive
|
It's a great product. Got exactly what i ordered. I did the install myself on a 2001 Pathfinder - took about an hour and a half cuz i'm not really a technical nut but i was able to do it on my own and i can't complain about the results. The Kit works great and i recommend anyone to buy it if they want a nice brighter looking headlight beam and also it makes you see much better in the night. Its really just plug and play with a little patience for taking down your headlights and changing the bulbs and installing the wiring - but no cutting or soldering is needed. Great product, works brilliant. | 1positive
|
I looked everywhere for these plugs. And they were so expensive. Finally found them here at a great price. Thanks. | 1positive
|
Works like a charm. It does what it says and I have had no issues so far. Works great with my solar panel. | 1positive
|
I was happy and pleased to find this item for such a great price! I replaced my old disgusting yellow fog lights for these and things are much brighter now! | 1positive
|
This is so much better than the white cover which came with the lights. You can actually use your fog lights without getting out of the car to remove the cover. | 1positive
|
I searched for "microfiber cleaner" on Amazon and this was the first thing that came up. The bottle says it's safe for all upholstery. I tested it on a small corner and it dried with no problem. But when I applied it to the large, stained area on my couch, it dried leaving a HUGE ring. I hope the dry cleaners can remove it.Don't use this on microfiber! You will ruin your furniture! :( :( :( | 0negative
|
I bought this to replace the oil cap that had broken on my Mitsubishi endeavor. After about a month it started to leak by...so I tightened the screw that held the flanges on it and bent the flanges in so it would be a tighter seal.....to no avail it still leaks, now i have oil all over my engine block and in places in the engine compartment that i cant reach to clean....I don't recommend this product at all. | 0negative
|
Works great. Had to clock the ignition faster than expected, took me a couple try's. I should have gotten four of them. When you set the new ones up it deletes the old ones from the vehicles memory. I just chucked them in the trash, they were on their last legs any way. | 1positive
|
Great product! I purchased a cheap hub when my passenger side went a couple years ago. Lo and behold, the drivers side is now shot and the passengers needs replaced also.These Timkens are much more substantial...and were actually on sale for less than the "cheap ones" | 1positive
|
Some winner knocked off my passenger side mirror and instead of leaving it by my car just took it. Well I bought this and it fits perfectly. | 1positive
|
The seat covers are put on my Honda Civic Hybrid. My wife drives it to work about 20 mile round trip. Only a few days after use, the driver's side of seat cover is broken already. | 0negative
|
I have always been a big fan of the K&N brand, but after installing this fantastic air intake kit on my Viper I can feel a noticeable difference in my Viper's performance. I highly recommend this product as it is easy to install and it looks fantastic! | 1positive
|
I bought this item to remove the in-line fuel filter from a 1998 Ford Explorer 4.0L SOHC.I got impression from the description that it was specifically for this purpose, however, when I attempted to use it, I discovered that it does not fit the interior of the locking collar it is supposed to release.Very disappointing, and as I live in the U.K., a very expensive error considering the cost of postage. | 0negative
|
Did not fit my 2007 Nissan Pathfinder SE. The item is too short to cover the front opening of the sunroof. Amazon description said it's a good fit but it's not. | 0negative
|
This cover is strong and fits the larger size tires. I had to replace the first one when someone ran into my Jeep at a red light. The cover tore and it messed up the rim but the cover actually protected the spare tire from any damage. The insurance company bought another one locally but had to return it (too small) so I went right back here and bought a replacement that I knew fit, would last and was strong. Much better made. Old one lasted for 6 years and still looked good. | 1positive
|
I bought this gauge from Target for around $11. While it will give you a quick initial reading, trying to do a second reading never works.Normally I put air into a tire and then recheck the gauge to see if the tire is still under-inflated or maybe over-inflated.With this gauge, you only get one reading. If you try to do another reading after putting some air in, it just reads 0.00, so you never know whether to continue filling air or to stop.This product is not recommended. | 0negative
|
I am very pleased with this seat, and I would suggest buying this product to anybody. Trus me, you won't regret it! | 1positive
|
The hoses have different treads than the part that attaches to engine block and to filter. I used a sealant to stop leaks. Three months later one of the hoses burst. Bad product. Very low quality. | 0negative
|
they sent me the wrong one for my vehicle, but i put these in all my rides and they are by far the best filters out there...negative reviews come from ppl who dont know what they are talking about. | 1positive
|
The replacement keyless entry remote worked perfectly after programming. Called tech support and they were fantastic! Was working in less than 5 minutes. | 1positive
|
I've used these gaskets for years but always had to go through a hassle to get them from the local parts store. Amazon allows me to get them for the same price (or cheaper) and I get them in 2 days via my Prime membership. Saves me hassle and money.FWIW, I've always installed these dry (no rtv, etc with them) and as a result, I've always been able to get 2-3 used out of them before I replace them. They are good metal core graphic gaskets and have large ports to work with many aftermarket Ford heads. I've used them on Edelbrock RPMs, Trick Flow Twisted Wedge and currently on AFR 185cc's. I won't use any other gasket. | 1positive
|
I put one of these next to my two busy litterboxes, and it does an effective job of eliminating odors. Surprising for something so small and inexpensive. One filter lasts me about one month. Recommended. | 1positive
|
Very disappointing. I had to pay my mechanic twice to have him figure out that the first system I received was faulty from the factory. I did receive a replacement which works fine. I do not feel I should have to pay my mechanic to find out the quality of the system. Someone should have picked up the tab for the first visit to the mechanic. | 0negative
|
Thanks, great product, surrendered on time at a fair price. it was already installed in the car working perfectly. ok | 1positive
|
I ordered seat covers for my Mazda 5 directly from CoverKing's web site. The second and third row covers came within a couple weeks, but the front row covers took 34 days to arrive, with no explanation.Three pieces of the second and third row covers were sewn/assembled incorrectly. One seat bottom cover included two indentations for the seat belt buckle, one on each side. The rear seats have hinges to fold flat, each with both a narrow and a wide hinge - the covers came with two narrow hinge pieces on one, and two wide hinge pieces on the second. They need better quality control processes!I contacted customer support, and provided pictures of the problem areas. Customer support seems to generally take several days to respond to inquiries. Instead of offering to take care of the issue, they insisted they needed additional pictures of the car before they would do anything. After receiving the pictures, they needed several numbers from the shipping boxes, which of course had been discarded by this point. Apparently, the order number alone is not enough for them to process replacements?So, I still have three pieces that don't fit, and while they finally agreed to prioritize sewing new covers, it will be another week or two before they arrive. *If* they make the replacement covers correctly, it will have been at least 50 days from the time I placed my order, to when I finally have everything installed.On the positive side, the covers seem to fit well, except for the arm rest pieces - they're significantly baggy. No seams ripped while installing, and they're relatively easy to secure. Not sure how they'll last in the long term, but so far, spills wipe up easily. | 0negative
|
Wonderful products that just fit, and clean up with ease keeping the carpet clean with all the dirty items I carry tools, fertilizer, manure, etc.. This has resulted in the past with better resale value for my cars, for they look great when I sell them. | 1positive
|
This is everything you need to properly wash an wax your vehicle. Pick up a claybar too. | 1positive
|
It was not Neoprene on the sides and back and the arm rest cover. Not any better than the crap you can pickup at your local auto store. Fit was terrible and installation was difficult even with the seat removed from my truck! Will NEVER by a Saddleman product again. | 0negative
|
I bought mine April 2001. It is no longer able to charge back up to power. It did work the first few months but now it is gone. It is interesting to see that I am not alone. | 0negative
|
1) I tried it on my car tires and it stopped inflating just a few seconds after it was started, well below the pressure level I set at the built-in pressure gauge. I also tried it on my soccer balls and it also stopped below the pressure level.2) The pressure gauge pointer is about 1.5 mm wide and it is not clear which edge (upper, middle or lower) it is supposed to be aligned with the PSI range which does not have accurate readings itself. It claimed to be+/-3% accurate which is a joke. | 0negative
|
Power cord cap is hard to secure on to cable, doesn't fit very well on to plug to protect it. Today went to plug in heater and the little plastic strap broke. Now I have no way to secure cap to cable:( | 0negative
|
Well, maybe that's a little too extreme a reaction for such a modest product, but --The tray does what it's designed to do. And it does it super well. Furthermore, it can do all this without corrosion.Man, science is pretty great. | 1positive
|
Really fixed my starting issues with my older vehicle. Glad I replaced them with these as they really work. Thanks!! | 1positive
|
First of all, I'm not sure if you are supposed to gap these or not, when I tried, these scratched the gaper.Nontheless, when I replaced my old worn out spark plugs with these (there was a huge gap difference, these are much smaller), I got a good 2 extra mpg that I was looking for in my Honda Prelude. (from 18mpg to 20mpg) I haven't noticed too much of a difference in the acceleration though. | 1positive
|
Sure, it's fine. It's an air filter. It fits. And apparently I need to write at least eleven more words. | 1positive
|
This worked. Once and only once.When I first got it, it worked decently well at pumping up my car tires. I then stored it in my car in case of emergencies.Then came the emergency. I pulled out the trusty little pump to fill a very slow tire leak and lo and behold the entire plug completely falls apart when I plugged it into the lighter. I was left high and dry and wasted half an hour of changing my tire instead of a simple 5 minute pump and driving one mile to my local tire shop.What a waste of money. | 0negative
|
These horns are the cheapest piece of crap I have ever seen. To start with, they come in a blister pack. That means that, in order to open them, you must destroy the packaging. (Now try returning them!) They do not come with any type of mounting hardware with the exception of a bolt and a nut for the trumpets and the compressor. There is no tubing for the "air" part. You must buy that apart from the kit. The "chrome plating" is so thin as to be laughable. The front of the horn that is used ,I assume, to block the entrance, is plastic, not chrome.All in all I would give this product a rating of minus five on a scale of ten, and I am being generous. | 0negative
|
The locks fit and will now help me sleep at night. In order to submit I must write more words. OK, more words | 1positive
|
Not very good at blocking out sun. If you want it for looks that's about the only benefit. With a clean window and all it always seemed to come off. | 0negative
|
I'm not sure why Coleman thinks that plugging a tiny 12V battery into your cigarette lighter socket will charge your BIG 12V battery that is dead. It's evident that the internal pack is only 13.2 VDC from Bruce Miller's photo. 12V lead acid car batteries are fully charged at 12.8 and close to dead at 12.0 after a 24 hour rest. Assuming you have a dead battery your mayby 12.0 - 12.1V and trying to coach a charge from a 13.2 VDC battery with 6 feet of tiny wire in between offering resistance and more voltage loss.The best chargers put out nearly 15V pulse charge during a charge cycle (e.g. CTEK CTK7002 MULTI US 7002 Battery Charger which **DOES** charge dead bats fast). With 13.2 in a nicad pack thats lost some charge already it's probably down to 13.0 offering a 1V difference. Surprise it doesn't work.Thanks go out to Mr. Miller for his photography inside the dud product. Had they added a couple more cells it *MIGHT* have had the needed voltage to charge a dead/dying 12VDC bat, and had they used D or F (elongated D) cells it would have had merrit but a C nicad, already down from 1.2 V in storage isn't going to do the trick. My big surprise is coleman, a name we have trusted for years, made such a contraption.I got one of these as a gift and just laughed. I ended up using the battery in an alarm - something more its size. | 0negative
|
Well designed and they work perfectly. I have a jeep wrangler Rubicon and was anxious to see how secure I'd be able to load my kayaks. Needless to say, I'm very satisfied. | 1positive
|
I was the world's worst about having a filthy car! I recently purchased this litterbag and 2 High Road XL organizers and now I have the most immaculate car around! With 2 sons (3&4)I was always ending up with leaky sippy cups on my floor mats. Now, we throw all of our trash in it, as well as, plates, cups, and anything else that has crumbs, food, drinks, etc. that used to clutter my car! At the end of each day when we get home, I simply grab the litterbag and empty it in the household trash and rinse it out. It's completely leak proof! The velcro at the bottom ensures that it doesn't flip over...LOVE IT! | 1positive
|
The muffler was awesome looking when i got it. I own a 2002 grand am 2.2l ecotec.it doesn't do alot sound wise. I cut my muffler off thats what gave my car the deep tone which was awesome. but the new muffler deepened that tone. overall it is a good buy for the money. | 1positive
|
A three ball one eh? NO. Didn not get the 3 balled one. Got a regular hitch. Not worth the effort in sending back and getting another. Went to local store and spent MORE money but got what I needed. Time was a issue by that point. Somebody somewhere either didnt read the order or just didn't care when they packed and sent this. | 0negative
|
The best glove money can buy. Worn them in low 40 deg 4 hour rides and hands were toasty warm. Buying a second pair just incase they decide to stop making them, I'm a bay area commuter and I wear these to split lanes. The dexterity is great without losing the warmth. You'll love them | 1positive
|
First off, it's heavy. Second, it takes approx. 26 pumps to fully extend. Third, the handle pulled apart with minimal effort. You couldn't even pull the jack with it. And fourth, when I unboxed it, I worked the jack up and down to test operation, (which was good, but slow), let it sit in my shop for a day before actually using it, and the thing puked fluid all over my floor. I spent a few exta dollars on an Arcan unit, and love it. | 0negative
|
I bought these for my '08 Xterra, along with those for the rear seats. The rear seats fit but the front passenger seat cover did not.I called the number on the instructions and I was directed to email pictures of the cover on the car, showing where and how it didn't fit. I did this and after a few days they got back to me by email.After a few exchanges of information and more pictures, they agreed the covers had not been cut properly so were sending a replacement. When the replacement arrived, I could see it wasn't even for this vehicle at all; the cutout for the seat back release didn't exist for one thing and there were cutouts where none were needed. I immediately got back to them on their customer service website with these problems but they had already closed out the service ticket so I had to start a new one.It's been a week and I haven't heard from anyone yet. Hopefully I will. At $150 a pair, these things should fit like a glove and their customer service should be more responsive. | 0negative
|
The Ford Escape Hybrid manual says this filter should be replaced every 10-20k miles. It is very very easy to replace; no hand tools are required! You won't even get your hands dirty. The filter has a small arrow on one side which indicates the direction of air flow. In this case, the air flows down, so the arrow should point down when you install the filter.The filter installs in a small door in the left rear of the vehicle. Installation takes about 1 minute (if that). My local dealer quoted $75 to replace this filter! I usually write the date and mileage on the filter when I install it so I can easily track how long it's been since it was replaced. | 1positive
|
Used the Bal-Twinpin Kingpin Stabilizer for a three month trip to Alaska this summer. Easy installation, fast take-down and fine motion dampening for our 30 ft. 5th wheel. Side to side, and front to back motion is dampened at an affordable price and with little storage space required. | 1positive
|
I have been using this product in the winter successfully since purchase in 2007. This week, I left my car running for a few minutes as it was very cold, came back to the car, and black smoke poured out ! The seat heater must have developed a short and burned a 4 inch hole in the seat. It worked great for two winter seasons, but I suspect the 'bunching up' problem as mentioned in other reviews caused this failure. I now have to get the smoke smell out of the car and have the seat repaired. Was a great product as it kept me warm, but this mechanical failure was almost disastrous. A few more minutes and my car may have been completely ruined. Be careful, do not let it bunch up or it could short. | 0negative
|
I had ordered the chevy emblem, but sorry to say I purchased the wrong emblem, I needed a smaller emblem for my car. I returned it with no problem, and was refunded my money. Thank you, Millie Durgan | 0negative
|
I bought this to save my dashboard from having its color fade in the bright South Florida sun. It does the job well. My only criticism is that it has a panel covering the passenger side air bag, a fault since the dashboard cover is supposedly made to fit my 2007 Honda Civic. | 1positive
|
It's a plastic valve cap! And its black. Not many things can go wrong here. Works well. Highly recommended! ! | 1positive
|
No problems installing on a late model (95) Suzuki GS 500 I bought. You need to remove the gas tank and hold it to the side, it's good to have 2 people for this job. It took me a little time aligning/ putting tank back on but not to bad, it's best if you don't have a lot of gas in the tank. You can do this job yourself fairly easily/quickly without much experience, there is a video on Y.T, a guy doing this GS 500 air filter job solo.Runs/starts much better, the existing air filter needed to be replaced, so I paid a few bucks more and got a K&N.; Actually, this filter at the time was around $25 less on this site then the local M.C. store. This is the 3rd K&N; product I've used, my car has a K&N; FIPK cold air intake. I've never had any issues with their filters/intakes. | 1positive
|
I ordered this regulator and had it installed in Sept 2008. It broke in April of 2009. | 0negative
|
Amazon is incorrect in stating that this fits the 2008 Honda Accord EX-L 4-cyl, Sedan. Blades are thin and cheap, not nearly as good as OEM. | 0negative
|
Shoei helmets are one of the best helmets you can get. I have no complains, the quality of this product is outstanding! Here are some of the things I love of my Shoei helmet:> It comes with a kind of cover to install under the chin. This is great to help suppressing the noise which wind produces on the helmet. I even hardly hear the engine sound! Also the helmet design itself reduces enormously the wind noise.> It has enough inner room for the "legs" of sunglasses (how's the name for that thing btw?). Wear whatever sunglasses style you like, it wont be never uncomfortable on this helmet!> The vent pads really works! Once they're open you can feel the wind coming thru your head!> The helmet is really lightweight. It feels VERY comfortable!> This Multitec version comes with flip-up front to become an open helmet. I love this feature, especially when I stop or when I need to talk to someone; I open it and I feel "free". Also, the front goes up and closes up very easily, even when wearing gloves. WARNING, never ride with the front opened!!!> My Suzuky GS 500 is black, so I bought my Shoei helmet black as well. It looks gorgeous! :-)I recommend highly this product, it is really FANTASTIC!!! A+++++ | 1positive
|
I plugged it in my car and follow the direction and all it did was an error and failed to read the ECU. The thing it self is cheap in design, it has mircowave buttons and slow load times. | 0negative
|
I have the same problem installing the driver side wiper on my 2007 Accord as the previous reviewer. As cq08 said, the issue is with the guide located on the car's attachment arm, not on Anco's wiper blade. The guide is used to stabilize the wiper blade and make sure it doesn't wobble when it's in use. Attaching the wiper itself to the car's attachment arm works fine. The guide on the attachment arm is too narrow for the anco wiper to fit, which results in only three quarters of the wiper resting on the windshield. One solution would be to file the guide down so that the blade would fit, but I think I'd rather just stick with a new OEM blade from Honda. | 0negative
|
I can't believe Amazon, of all places, had this in stock and could 2nd day air it to my engine tuner!! This was a lifesaver. I had installed three sets of used computers and kept having the same - idle only - malfunction. My tuner flashed the programming into this new computer and had the engine running in minutes.BTW, this was an 18 month production computer that most shops didn't stock. If they did stock it, it was nearly twice the price!! | 1positive
|
I have used these gloves for the past two years and I have had no problems with them. Being perforated, they breath very well in hot weather. They are not meant for cold weather though. I have worn them a couple times in the 40's and my fingers nearly froze off, but for hot weather, they can't be beat. My hands do not get hot and sweaty while wearing these. They are very comfortable, and have a knuckle guard built in. I need to order another pair only because my dog chewed the pinkie off one of them. I'm 6'2 180 and wear an XL. | 1positive
|
This is the same beaded one you get at walmart for 9 dollars. I have white seats and the beads with the dye on them stained the seats. Second you will become and expert in tying this thing to the seat over and over. When you sit on it the back part has the most pressure and the string snaps. The sun will also dry out the string if you have a convertible so pick your string wisely. | 0negative
|
My local Walmart has the exact same item at the exact same size and it is $4.00 less than Amazon. Usually Amazon has the lowest prices on almost everything. | 1positive
|
It fits my 99 Forester. However the direction of the output port faces the opposite way compared to stock. I was still able to use it by adding a bit more tubing. It's been working for about a year now. | 1positive
|
While the mirror bolts on just fine and the weather seal seems to be tight, I returned this mirror because the electrical plug was wrong. It needed to be a male end to connect to the female plug in the door panel, but was female just like the connector in the door. I could have tried to splice on the male connector from the old mirror, but chose to simply get a manual mirror instead (which had its own problems - see other review). According to various checks I did at the website, this was the correct model for my 2004 Camry. Physically it looked correct, but the electrical issue was not worth the trouble. I was concerned that if I spliced on the old connector and there continued to be problems, the motor/gears would prevent manual adjustments of the mirror. And once I had cut the wires I would not be able to return the mirror. That's why I went with a manual mirror in the end. | 0negative
|
Cycling the key on early 90's Chrysler products for the error codes is no secret, and the error codes are easily available on line. The manufacturer's website doesn't do much to explain what else is in the package. This seems expensive for what it appears to be. | 0negative
|
I only use K&N filters for all of my vehicles. The air filters do add power and increase gas mileage. They also save money over time because they never need to be changed. | 1positive
|
I had a different brand intake setup on my Silverado that basically fell apart. So I threw the stock box back on and used this to go from the box to the intake. Seems well made and fit well. Not really sure how much improvement I got on performance, but it will allow the truck to breath much better than stock, so I guess it does all it is supposed to. | 1positive
|
This part fits a 2004 Dodge ram 1500. But it does NOT fit a 2004 dodge ram 2500 alrighty ok | 0negative
|
This mat is advertised as a "custom fit". That is a false description. It is not a "molded" fit. It simply fits the area of the shape of the dash. It also did not come with any fastening devices. | 0negative
|
I bought two rattle cans of the flat black and one can of the white for my brake calipers from Napa Auto. It was 6$ a can but the paint job comes off pretty smooth if you know what you're doing. I laid down two coats of white and two coats of black on my calipers all around my Honda Civic with disc brake conversion. I also got a little carried away and painted my valve cover and exaust mani with the same layers. I'm looking for some hi-temp clear coat to finish them all off and came across this and figured I'd tell anyone else who is looking for this stuff how well it goes on. Yes its coming out of a rattle can but it coats niceley if you do enough layers. As far as heat I couldn't tell you if its really good up to 1500 or if it REALLY has ceramic in it but it looks good and serves its purpose on my daily driver. | 1positive
|
My old remote was completely ruined and I wanted a new one..Like always Toyota dealers were trying to rip me offf with a new one for about 150+100 (programming)...I purchased for a real damn good price and made it to work following the step in 5 min...Thanks guys!!! | 1positive
|
I ordered the K&N PL-1003 Air Filter for my 2012 Polaris Sportsman 500 H.O. Shipping was quick, and packaging was adequate. I hate paper filters and have been trusting K&N for years. This product will not disappoint. I am very pleased with this product. | 1positive
|
The filter has many benifits to it aside from good gas mileage. I installed this in a kia spectra, that had a paper filter stock. It was ok before but know it is much more powerful, and revs much better. I haven't found out if it gets better mileage but I'm assuming it does if it gets more power, it will get better mileage. Any K&N; filter will be good, as long as its a cone shape. Something else that I noticed was the increased resonance from the ingine. Its a something that I like to see in the car, its louder. If you what a better sounding engine, and more power, and possilby better mpg this is for you.To the people that did not find this helpful let me know in the comment section below | 1positive
|
If you have a rip of any size in your leather I would not recomend this. The product says it repairs smaller rips, I had a quarter inch rip in my couch and followed the instructions provided and only accomplished one thing making sure everyone knows about the rip now. I would recomend looking for a professional to repair any expensive piece of leather. | 0negative
|
This item is not more useful than a simple rag.I does not connect to your hose as I thought it would. | 0negative
|
It is expensive, but the quality is outstanding. If you are installing it in a snowy night, you will certainty appreciate the ease-of-installation more. | 1positive
|
Just what I needed. I would rather use factory *AC Delco* when available. The price was right and shipping was a snap. I am aware that AC Delco is a tad more expensive than after-market; however, in most cases, the item is a direct fit. Be sure to keep the receipt and the warranty card from the box, in case you wish to use the warranty. | 1positive
|
Got these roof racks for my 1/4 ton work van at a great price on Amazon after doing some savvy internet price shopping. I am completely satisfied with my purchase. I mounted these within 45 minutes and only had to drill two holes in the racks themselves where they bolt together. Probably not a good set of racks if you plan on carrying loads over 400 lbs but they will be fine for about five or six ladders or any loads similar in weight. I am a commercial painter so these things were a must to have and have suited my needs perfectly. | 1positive
|
I used this in a NEW 2012 VW Jetta 2.5SE. Took a little to get the engine cover off and in place. But, once it was in, there was a slight, noticeable difference in acceleration and mpg. I would say it definitely added 2-4hp, from 177 base HP to maybe +-180hp. Torque had the same increase it seemed.As for gas, on the highway, I went from about 30mpg to 31.5-32mpg. In town, no difference in mpg, but tremendous difference in gas pick-up, and acceleration. I did not have to get on the gas nearly as much to get the power out of it to get going, which is very nice! Can take it easier on the parts and wear and tear on the car.....FYI: Just make sure(depending on where you live) to clean/wash the filter out every 15-25,000 miles. Then make sure you oil and add the lubricant to the gauze filter, and let it rest for a few hours before you put it back in. This will ensure the lifetime use out of the filter in the car. | 1positive
|
This is the one of the simplest, easiest, and fastest ways there is to bleed brakes, and you can do it all by yourself. You just have to make sure it's clean and you don't spill brake fluid on your paint, and you'll have freshly bled brakes in a matter of minutes. I use this on Porsche race cars with great results. | 1positive
|
The lights came as expected and look incredible. The lights make me want to paint up the rest of the trailor! | 1positive
|
I gave this one 1 star, not because of it's quality, but this misleaded me. I thought it was a block big enough, ja! ja! When I received it, my surprise!: this block in size(it's length) was not bigger than my thumb. Just to give you an idea, it's length is about the same length as a Zippo lighter.For $1.00, this product is OK, but not for what is selling for. | 0negative
|
these stands failed me while doing brake job on f-350 100k in medical bills the legs of both stands buckled while supporting the back of vehicle | 0negative
|
This backup light kit (517) from KC Hilites has everything you need. The wires are plenty long enough for an install on a full size Nissan Titan pickup. The plastic wire loom included in the kit (to keep the wire from rubbing against the frame/body) was also plenty long. In fact it was longer than the wire and I had to cut it to length.The relay included in the kit allows you to tap into the wire going to the OEM backup lights without drawing power from those lights for the new backup lights. KC Hilites also produces a switch kit (6303 sold separately) that connects into the relay and allows you to turn on the backup lights without putting the vehicle into reverse.As noted in other reviews the description for this item is wrong on a number of accounts. Only one set of lenses is included, not three. These are the clear, long range lenses, not the fog or amber lenses. The illuminated switch is not included - that is item 6303 from KC Hilites. Light covers are also not included. The All Season version of this kit (516) does come with the extra lenses, switch and covers. Of course that kit is more expensive. | 1positive
|
i think this is a very nice decal the only problem i have is that i bought two of them and when i put them on the two rear glasses of my car one seems as tho as it is looking backward | 1positive
|