text
stringlengths
0
2.74k
; generated by PrusaSlicer 2.1.1+ on 2020-04-08 at 01:19:35 UTC
;
; external perimeters extrusion width = 0.60mm
; perimeters extrusion width = 0.50mm
; infill extrusion width = 0.50mm
; solid infill extrusion width = 0.50mm
; top infill extrusion width = 0.45mm
; first layer extrusion width = 0.42mm
M73 P0 R177
M73 Q0 S178
M201 X1000 Y1000 Z1000 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.8.1 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Y-3.0 F1000.0 ; go outside print area
G92 E0.0
G1 X60.0 E9.0 F1000.0 ; intro line
M73 Q0 S178
M73 P0 R177
G1 X100.0 E12.5 F1000.0 ; intro line
G92 E0.0
M221 S95
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K30 ; Filament gcode
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2
G1 E-0.80000 F2100.00000
G1 Z0.600 F10800.000
;AFTER_LAYER_CHANGE
;0.2
G1 X145.215 Y20.499
G1 Z0.200
G1 E0.80000 F2100.00000
M204 S1000
G1 F1200
G1 X169.618 Y24.030 E0.77310
G1 X177.036 Y25.242 E0.23567
G1 X184.219 Y26.873 E0.23096
G1 X191.104 Y28.913 E0.22515
G1 X197.402 Y31.265 E0.21079
G1 X205.853 Y34.739 E0.28647
G1 X208.596 Y36.102 E0.09607
G1 X211.507 Y38.084 E0.11041
G1 X214.473 Y40.612 E0.12219
G1 X217.520 Y43.689 E0.13577
G1 X220.642 Y47.296 E0.14958
G1 X223.876 Y51.472 E0.16560
G1 X227.206 Y56.190 E0.18108
G1 X228.837 Y58.706 E0.09402
G1 X230.399 Y61.486 E0.09996
G1 X231.937 Y64.632 E0.10983
G1 X233.331 Y67.889 E0.11106
G1 X234.671 Y71.453 E0.11940
G1 X235.923 Y75.234 E0.12489
G1 X239.710 Y87.749 E0.40996
G1 X240.941 Y92.180 E0.14419
G1 X241.841 Y96.695 E0.14435
G1 X242.388 Y101.205 E0.14246
G1 X242.585 Y105.731 E0.14201
G1 X242.433 Y110.245 E0.14163
G1 X241.931 Y114.790 E0.14338
G1 X240.481 Y124.167 E0.29749
G1 X237.902 Y134.971 E0.34826
G1 X235.427 Y143.250 E0.27096
G1 X232.211 Y151.086 E0.26558
G1 X228.443 Y158.054 E0.24837
G1 X224.013 Y164.407 E0.24285
G1 X218.801 Y170.263 E0.24579
G1 X212.895 Y175.448 E0.24641
G1 X201.913 Y183.082 E0.41938
G1 X196.461 Y185.827 E0.19139
G1 X190.354 Y187.966 E0.20287
G1 X183.388 Y189.558 E0.22405
G1 X175.837 Y190.531 E0.23872
G1 X140.467 Y192.302 E1.11039
G1 X137.791 Y192.176 E0.08399
G1 X50.848 Y174.102 E2.78433
G1 X46.653 Y172.733 E0.13834
G1 X42.728 Y170.819 E0.13691