context
stringlengths 230
253
| answer
stringlengths 42
68
| question
stringclasses 1
value |
|---|---|---|
table([ eof x: 380 y: 0 z: 620, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (380; 0; 620) | take the green-cylinder and put it inside the black cup |
table([ eof x: 380 y: 0 z: 620, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (379; 0; 619) | take the green-cylinder and put it inside the black cup |
table([ eof x: 379 y: 0 z: 619, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (379; 0; 618) | take the green-cylinder and put it inside the black cup |
table([ eof x: 379 y: 0 z: 618, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (378; 0; 618) | take the green-cylinder and put it inside the black cup |
table([ eof x: 378 y: 0 z: 618, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (378; 0; 617) | take the green-cylinder and put it inside the black cup |
table([ eof x: 378 y: 0 z: 617, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (377; 0; 616) | take the green-cylinder and put it inside the black cup |
table([ eof x: 377 y: 0 z: 616, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (377; 0; 615) | take the green-cylinder and put it inside the black cup |
table([ eof x: 377 y: 0 z: 615, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (376; 0; 614) | take the green-cylinder and put it inside the black cup |
table([ eof x: 376 y: 0 z: 614, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (376; 0; 613) | take the green-cylinder and put it inside the black cup |
table([ eof x: 376 y: 0 z: 613, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (375; 0; 613) | take the green-cylinder and put it inside the black cup |
table([ eof x: 375 y: 0 z: 613, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (374; 0; 612) | take the green-cylinder and put it inside the black cup |
table([ eof x: 374 y: 0 z: 612, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (374; -1; 611) | take the green-cylinder and put it inside the black cup |
table([ eof x: 374 y: -1 z: 611, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (373; -1; 610) | take the green-cylinder and put it inside the black cup |
table([ eof x: 373 y: -1 z: 610, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (373; -1; 609) | take the green-cylinder and put it inside the black cup |
table([ eof x: 373 y: -1 z: 609, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (372; -1; 608) | take the green-cylinder and put it inside the black cup |
table([ eof x: 372 y: -1 z: 608, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (372; -1; 608) | take the green-cylinder and put it inside the black cup |
table([ eof x: 372 y: -1 z: 608, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (371; -1; 607) | take the green-cylinder and put it inside the black cup |
table([ eof x: 371 y: -1 z: 607, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (371; -1; 606) | take the green-cylinder and put it inside the black cup |
table([ eof x: 371 y: -1 z: 606, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (370; -1; 605) | take the green-cylinder and put it inside the black cup |
table([ eof x: 370 y: -1 z: 605, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (369; -1; 604) | take the green-cylinder and put it inside the black cup |
table([ eof x: 369 y: -1 z: 604, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (369; -1; 603) | take the green-cylinder and put it inside the black cup |
table([ eof x: 369 y: -1 z: 603, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (368; -1; 603) | take the green-cylinder and put it inside the black cup |
table([ eof x: 368 y: -1 z: 603, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (368; -1; 602) | take the green-cylinder and put it inside the black cup |
table([ eof x: 368 y: -1 z: 602, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (367; -1; 601) | take the green-cylinder and put it inside the black cup |
table([ eof x: 367 y: -1 z: 601, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (367; -1; 600) | take the green-cylinder and put it inside the black cup |
table([ eof x: 367 y: -1 z: 600, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (366; -1; 599) | take the green-cylinder and put it inside the black cup |
table([ eof x: 366 y: -1 z: 599, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (366; -1; 598) | take the green-cylinder and put it inside the black cup |
table([ eof x: 366 y: -1 z: 598, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (365; -1; 598) | take the green-cylinder and put it inside the black cup |
table([ eof x: 365 y: -1 z: 598, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (364; -1; 597) | take the green-cylinder and put it inside the black cup |
table([ eof x: 364 y: -1 z: 597, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (364; -1; 596) | take the green-cylinder and put it inside the black cup |
table([ eof x: 364 y: -1 z: 596, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (363; -1; 595) | take the green-cylinder and put it inside the black cup |
table([ eof x: 363 y: -1 z: 595, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (363; -1; 594) | take the green-cylinder and put it inside the black cup |
table([ eof x: 363 y: -1 z: 594, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (362; -2; 594) | take the green-cylinder and put it inside the black cup |
table([ eof x: 362 y: -2 z: 594, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (362; -2; 593) | take the green-cylinder and put it inside the black cup |
table([ eof x: 362 y: -2 z: 593, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (361; -2; 592) | take the green-cylinder and put it inside the black cup |
table([ eof x: 361 y: -2 z: 592, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (361; -2; 591) | take the green-cylinder and put it inside the black cup |
table([ eof x: 361 y: -2 z: 591, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (360; -2; 590) | take the green-cylinder and put it inside the black cup |
table([ eof x: 360 y: -2 z: 590, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (359; -2; 589) | take the green-cylinder and put it inside the black cup |
table([ eof x: 359 y: -2 z: 589, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (359; -2; 589) | take the green-cylinder and put it inside the black cup |
table([ eof x: 359 y: -2 z: 589, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (358; -2; 588) | take the green-cylinder and put it inside the black cup |
table([ eof x: 358 y: -2 z: 588, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (358; -2; 587) | take the green-cylinder and put it inside the black cup |
table([ eof x: 358 y: -2 z: 587, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (357; -2; 586) | take the green-cylinder and put it inside the black cup |
table([ eof x: 357 y: -2 z: 586, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (357; -2; 585) | take the green-cylinder and put it inside the black cup |
table([ eof x: 357 y: -2 z: 585, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (356; -2; 584) | take the green-cylinder and put it inside the black cup |
table([ eof x: 356 y: -2 z: 584, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (355; -2; 584) | take the green-cylinder and put it inside the black cup |
table([ eof x: 355 y: -2 z: 584, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (355; -2; 583) | take the green-cylinder and put it inside the black cup |
table([ eof x: 355 y: -2 z: 583, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (354; -2; 582) | take the green-cylinder and put it inside the black cup |
table([ eof x: 354 y: -2 z: 582, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (354; -2; 581) | take the green-cylinder and put it inside the black cup |
table([ eof x: 354 y: -2 z: 581, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (353; -2; 580) | take the green-cylinder and put it inside the black cup |
table([ eof x: 353 y: -2 z: 580, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (353; -2; 579) | take the green-cylinder and put it inside the black cup |
table([ eof x: 353 y: -2 z: 579, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (352; -2; 579) | take the green-cylinder and put it inside the black cup |
table([ eof x: 352 y: -2 z: 579, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (352; -2; 578) | take the green-cylinder and put it inside the black cup |
table([ eof x: 352 y: -2 z: 578, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (351; -2; 577) | take the green-cylinder and put it inside the black cup |
table([ eof x: 351 y: -2 z: 577, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (350; -3; 576) | take the green-cylinder and put it inside the black cup |
table([ eof x: 350 y: -3 z: 576, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (350; -3; 575) | take the green-cylinder and put it inside the black cup |
table([ eof x: 350 y: -3 z: 575, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (349; -3; 575) | take the green-cylinder and put it inside the black cup |
table([ eof x: 349 y: -3 z: 575, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (349; -3; 574) | take the green-cylinder and put it inside the black cup |
table([ eof x: 349 y: -3 z: 574, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (348; -3; 573) | take the green-cylinder and put it inside the black cup |
table([ eof x: 348 y: -3 z: 573, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (348; -3; 572) | take the green-cylinder and put it inside the black cup |
table([ eof x: 348 y: -3 z: 572, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (347; -3; 571) | take the green-cylinder and put it inside the black cup |
table([ eof x: 347 y: -3 z: 571, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (347; -3; 570) | take the green-cylinder and put it inside the black cup |
table([ eof x: 347 y: -3 z: 570, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (346; -3; 570) | take the green-cylinder and put it inside the black cup |
table([ eof x: 346 y: -3 z: 570, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (345; -3; 569) | take the green-cylinder and put it inside the black cup |
table([ eof x: 345 y: -3 z: 569, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (345; -3; 568) | take the green-cylinder and put it inside the black cup |
table([ eof x: 345 y: -3 z: 568, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (344; -3; 567) | take the green-cylinder and put it inside the black cup |
table([ eof x: 344 y: -3 z: 567, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (344; -3; 566) | take the green-cylinder and put it inside the black cup |
table([ eof x: 344 y: -3 z: 566, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (343; -3; 565) | take the green-cylinder and put it inside the black cup |
table([ eof x: 343 y: -3 z: 565, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (343; -3; 565) | take the green-cylinder and put it inside the black cup |
table([ eof x: 343 y: -3 z: 565, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (342; -3; 564) | take the green-cylinder and put it inside the black cup |
table([ eof x: 342 y: -3 z: 564, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (342; -3; 563) | take the green-cylinder and put it inside the black cup |
table([ eof x: 342 y: -3 z: 563, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (341; -3; 562) | take the green-cylinder and put it inside the black cup |
table([ eof x: 341 y: -3 z: 562, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (340; -3; 561) | take the green-cylinder and put it inside the black cup |
table([ eof x: 340 y: -3 z: 561, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (340; -3; 560) | take the green-cylinder and put it inside the black cup |
table([ eof x: 340 y: -3 z: 560, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (339; -3; 560) | take the green-cylinder and put it inside the black cup |
table([ eof x: 339 y: -3 z: 560, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (339; -3; 559) | take the green-cylinder and put it inside the black cup |
table([ eof x: 339 y: -3 z: 559, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (338; -4; 558) | take the green-cylinder and put it inside the black cup |
table([ eof x: 338 y: -4 z: 558, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (338; -4; 557) | take the green-cylinder and put it inside the black cup |
table([ eof x: 338 y: -4 z: 557, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (337; -4; 556) | take the green-cylinder and put it inside the black cup |
table([ eof x: 337 y: -4 z: 556, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (337; -4; 555) | take the green-cylinder and put it inside the black cup |
table([ eof x: 337 y: -4 z: 555, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (336; -4; 555) | take the green-cylinder and put it inside the black cup |
table([ eof x: 336 y: -4 z: 555, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (335; -4; 554) | take the green-cylinder and put it inside the black cup |
table([ eof x: 335 y: -4 z: 554, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (335; -4; 553) | take the green-cylinder and put it inside the black cup |
table([ eof x: 335 y: -4 z: 553, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (334; -4; 552) | take the green-cylinder and put it inside the black cup |
table([ eof x: 334 y: -4 z: 552, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (334; -4; 551) | take the green-cylinder and put it inside the black cup |
table([ eof x: 334 y: -4 z: 551, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (333; -4; 551) | take the green-cylinder and put it inside the black cup |
table([ eof x: 333 y: -4 z: 551, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (333; -4; 550) | take the green-cylinder and put it inside the black cup |
table([ eof x: 333 y: -4 z: 550, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (332; -4; 549) | take the green-cylinder and put it inside the black cup |
table([ eof x: 332 y: -4 z: 549, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (332; -4; 548) | take the green-cylinder and put it inside the black cup |
table([ eof x: 332 y: -4 z: 548, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (331; -4; 547) | take the green-cylinder and put it inside the black cup |
table([ eof x: 331 y: -4 z: 547, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (330; -4; 546) | take the green-cylinder and put it inside the black cup |
table([ eof x: 330 y: -4 z: 546, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (330; -4; 546) | take the green-cylinder and put it inside the black cup |
table([ eof x: 330 y: -4 z: 546, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (329; -4; 545) | take the green-cylinder and put it inside the black cup |
table([ eof x: 329 y: -4 z: 545, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (329; -4; 544) | take the green-cylinder and put it inside the black cup |
table([ eof x: 329 y: -4 z: 544, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (328; -4; 543) | take the green-cylinder and put it inside the black cup |
table([ eof x: 328 y: -4 z: 543, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (328; -4; 542) | take the green-cylinder and put it inside the black cup |
table([ eof x: 328 y: -4 z: 542, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (327; -4; 541) | take the green-cylinder and put it inside the black cup |
table([ eof x: 327 y: -4 z: 541, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (327; -5; 541) | take the green-cylinder and put it inside the black cup |
table([ eof x: 327 y: -5 z: 541, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (326; -5; 540) | take the green-cylinder and put it inside the black cup |
table([ eof x: 326 y: -5 z: 540, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (325; -5; 539) | take the green-cylinder and put it inside the black cup |
table([ eof x: 325 y: -5 z: 539, gripper: open, black-cup x: 27 y: 32 z: 0 , green-cylinder x: 3 y: -32 z: 0 , green-square x: 26 y: -15 z: 80 , grey-square x: -22 y: -27 z: 80 , red-square x: 18 y: 25 z: 80 , red-pyramid x: -22 y: 14 z: 40]) | * go above the element to pick * gripper open * goto (325; -5; 538) | take the green-cylinder and put it inside the black cup |
End of preview. Expand
in Dataset Viewer.
README.md exists but content is empty.
Use the Edit dataset card button to edit it.
- Downloads last month
- 34