log
stringlengths 8
143
| label
stringclasses 2
values |
|---|---|
authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=218.188.2.4 | anomaly |
check pass; user unknown | normal |
authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=220-135-151-1.hinet-ip.hinet.net user=root | anomaly |
session opened for user cyrus by (uid=0) | normal |
session closed for user cyrus | normal |
ALERT exited abnormally with [1] | anomaly |
connection from 24.54.76.216 (24-54-76-216.bflony.adelphia.net) at Fri Jun 17 07:07:00 2005 | anomaly |
authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=211.46.224.253 user=guest | anomaly |
User unknown timed out after 900 seconds at Sat Jun 18 02:23:10 2005 | normal |
cupsd startup succeeded | normal |
restart. | normal |
Received SNMP packet(s) from 67.170.148.126 | normal |
Authentication failed from 163.27.187.39 (163.27.187.39): Permission denied in replay cache code | anomaly |
Kerberos authentication failed | anomaly |
Authentication failed from 163.27.187.39 (163.27.187.39): Software caused connection abort | normal |
*** info [mice.c(1766)]: | normal |
imps2: Auto-detected intellimouse PS/2 | normal |
removing device node '/udev/vcsa2' | normal |
creating device node '/udev/vcs2' | normal |
authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=212.0.132.20 user=test | anomaly |
authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= | anomaly |
Couldn't authenticate user | anomaly |
ANONYMOUS FTP LOGIN FROM 84.102.20.2, (anonymous) | anomaly |
notify question section contains no SOA | anomaly |
getpeername (ftpd): Transport endpoint is not connected | normal |
warning: can't get client address: Connection reset by peer | normal |
klogd 1.4.1, log source = /proc/kmsg started. | normal |
Linux version 2.6.5-1.358 (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004 | normal |
BIOS-provided physical RAM map: | normal |
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) | normal |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) | normal |
0MB HIGHMEM available. | normal |
126MB LOWMEM available. | normal |
zapping low mappings. | normal |
klogd startup succeeded | normal |
DMA zone: 4096 pages, LIFO batch:1 | normal |
Normal zone: 28334 pages, LIFO batch:6 | normal |
irqbalance startup succeeded | normal |
HighMem zone: 0 pages, LIFO batch:1 | normal |
DMI 2.3 present. | normal |
ACPI disabled because your bios is from 2000 and too old | normal |
You can enable it with acpi=force | anomaly |
Built 1 zonelists | normal |
Kernel command line: ro root=LABEL=/ rhgb quiet | normal |
Initializing CPU#0 | normal |
CPU 0 irqstacks, hard=02345000 soft=02344000 | normal |
portmap startup succeeded | normal |
PID hash table entries: 512 (order 9: 4096 bytes) | normal |
Detected 731.219 MHz processor. | normal |
Version 1.0.6 Starting | normal |
Using tsc for high-res timesource | normal |
rpc.statd startup succeeded | normal |
Console: colour VGA+ 80x25 | normal |
Calibrating delay loop... 1445.88 BogoMIPS | normal |
Security Scaffold v1.0.0 initialized | normal |
SELinux: Initializing. | normal |
SELinux: Starting in permissive mode | normal |
There is already a security framework initialized, register_security failed. | anomaly |
Failure registering capabilities with the kernel | anomaly |
selinux_register_security: Registering secondary module capability | normal |
Capability LSM initialized | normal |
rpc.idmapd startup succeeded | normal |
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | normal |
Mount-cache hash table entries: 512 (order: 0, 4096 bytes) | normal |
CPU: L1 I cache: 16K, L1 D cache: 16K | normal |
CPU: L2 cache: 256K | normal |
Intel machine check architecture supported. | normal |
Intel machine check reporting enabled on CPU#0. | normal |
CPU: Intel Pentium III (Coppermine) stepping 06 | normal |
Enabling fast FPU save and restore... done. | normal |
Enabling unmasked SIMD FPU exception support... done. | normal |
Checking 'hlt' instruction... OK. | normal |
Initializing random number generator: succeeded | normal |
POSIX conformance testing by UNIFIX | normal |
NET: Registered protocol family 16 | normal |
PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1 | normal |
PCI: Using configuration type 1 | normal |
mtrr: v2.0 (20020519) | normal |
ACPI: Subsystem revision 20040326 | normal |
ACPI: Interpreter disabled. | normal |
Linux Plug and Play Support v0.97 (c) Adam Belay | normal |
usbcore: registered new driver usbfs | normal |
usbcore: registered new driver hub | normal |
ACPI: ACPI tables contain no PCI IRQ routing entries | anomaly |
PCI: Invalid ACPI-PCI IRQ routing table | anomaly |
PCI: Probing PCI hardware | normal |
PCI: Probing PCI hardware (bus 00) | normal |
Transparent bridge - 0000:00:1e.0 | normal |
PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0 | normal |
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) | normal |
kernel.core_uses_pid = 1 | normal |
HCI daemon ver 2.4 started | normal |
hcid startup succeeded | normal |
audit(1122475266.4294965305:0): initialized | normal |
Setting network parameters: succeeded | normal |
sdpd startup succeeded | normal |
sdpd v1.5 started | normal |
Total HugeTLB memory allocated, 0 | normal |
Bringing up loopback interface: succeeded | normal |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | normal |
End of preview. Expand
in Dataset Viewer.
No dataset card yet
New: Create and edit this dataset card directly on the website!
Contribute a Dataset Card- Downloads last month
- 4