vall-e / README.md
ecker's picture
Update README.md
ad71a7a verified
|
raw
history blame
7.14 kB
---
license: agpl-3.0
---
This repo catalogs my weights for use with my [VALL-E](https://github.com/e-c-k-e-r/vall-e) implementation as I try and iron out the kinks.
The model currently is in a *semi-usable* state, and I'm releasing them now in hopes that it also helps jumpstart anyone else that wants to use them.
To reiterate, this is ***by no means*** complete. I am not passing this off as competitive.
## Models
This repo contains the following configurations:
* `config.retnet.yaml` / `ar+nar-retnet-8`: The previously released weights.
+ This configuration utilizes a RetNet (retention based "transformer") as the underlying architecture due to a number of misleading interpretations with comparisons, for better or for worse.
+ Prompt and response embeddings are summed (further RVQ levels gets the previous RVQ levels' embeddings factored in).
+ Tokenizer is a homebrewed "naive" implementation.
+ This model received the most training time between my 4070Ti, 7900XTX, and a few rental rigs to training further progress, entirely at `bfloat16` with `prodigyopt` (and a few optimizer restarts).
+ The later part of training aimed to shuffle between speakers rather than the global pool of utterances to better focus on zero-shot performance. Due to this, I feel it achieved *decent* zero-shot performance.
+ However, due to the dataset being aggressively trimmed under 12 seconds for memory savings during training, it suffers trying to inference non-short utterances. Additional training may fix this, the following models seemed to adapt well to longer utterances.
+ From the `ar+nar-llama-8` experiment, I believe this can be "fixed" with additional training on the currently processed dataset.
+ Prior testing showed that longer prompt durations results in better utterances.
+ *Can* benefit from additional training, but I recall the average loss being around `1.9` to `2.1`.
+ However, due to regressions (or bias from working under `llama`), I don't think I can optimially train with a RetNet again (both in terms of VRAM consumption and throughput).
* `config.llama.yaml` / `ar+nar-llama-8`: The most recent-ishly trained weights after learning from my mistakes.
+ This configuration utilizes Llama's attention-based transformer as the underlying architecture, making use of creature comforts like RoPE, GQA, and memory-efficient attention (trained under `xformers`, shouldn't really affect things).
+ Prompt and response embeddings are NOT summed (each RVQ level only attends to the current RVQ level).
+ Utilizes a HF tokenizer for "optimal" vocab.
+ The current RVQ level is included as a token as well to help guide NAR tasks better.
+ This model received a few days of training on my 4xV100s, stepping up the duration window to *try* and better make the model inference for longer utterances.
+ Some sessions end up training the current duration window for a few epochs, but I don't know how much it affected things.
+ ~~However, it seems to *only* do well with long utterances. Short utterances fumble. I believe further training with a variety of durations should allow the AR to handle a variety of durations.~~
- ~~I believe the "slowly stepping up the context length" only works for text, and not audio.~~
- Addendum: Additional brief training for a variety of duration lengths seemed to have mostly fixed this issue.
+ Zero-shot performance leaves a bit to be desired, as it did not receive the special training prioritizing shuffling between speakers rather than the global pool of utterances.
- Addendum: Additional brief training for sampling based on speaker per "epoch" (per dataloader, not dataset) seemed to slightly improve it.
+ Testing showed that, despite also stepping up the prompt duration, it *really* likes three second prompts.
+ Definitely needs additional training, but the next way to go is unknown.
+ Naturally, training it on a "next RVQ level is half as likely" distribution introduces some crust as the later RVQ levels are less accurate, introducing noise and artifacts.
+ Naively training it on equally distributed RVQ levels *does* lobotomize the AR.
+ Additional training on the AR will see huge diminishing returns, so I don't know if it's worth doing so.
+ Seems to be a decent foundation for "distillation", at the very least for LoRA training.
* `config.llama.split.yaml` / `ar-llama-1` + `nar-llama-8`: The above model, but split and trained a little bit more.
+ This experiment is to see whether the AR and NAR benefitted from being split up after enough pretraining, to un-"lobotomize" any penalties from attending to two different tasks (as the AR predicts the next token, and the NAR predicts the same token but a different level).
+ I believe I trained each separate model an additional extra day for another additional audio-duration window for similar training lengths.
+ ~~I don't think audio quality differs a non-trivial amount to warrant splitting the model.~~
- From recent experiments, it does seem a NAR-only model is beneficial.
Some additional configurations have been explored with, but experiments have not been fruitful:
* Exotic wrappers like `BitNet` seemed to yield little gains in inferencing, somehow.
* Mamba / Mamba2-based models have shown that it's ***really*** hard to have an AR+NAR model.
* A NAR only model has been experimented with, but seemed utterly useless in practice.
+ The underlying architecture will query the model for the duration, and then inference *all* RVQ levels in parallel (one level at a time).
+ Despite working in the overfitting test trainer and decent training metrics, inferencing will have the model fall completely flat.
+ I have zero ideas for which path to go with for further experimentation.
* A [Descript-Audio-Codec](https://github.com/descriptinc/descript-audio-codec/) based model has been experimented with, but has not seem fruitful.
+ This model would make use of 16 layers instead of the default 12 layers. I feel the performance hit is negligible, even with the additional tokens-per-frame increase with DAC.
+ This utilizes DAC's 44Khz model (erroniously at an actual 44KHz instead of 44.1KHz), as audio quantized through the 24KHz model will *always* diverge.
+ I imagine due to the nature of DAC leaving very little room for errors (a testament to how "optimized" the codes are), it's ***really*** hard to model an LM with it.
+ Output audio is rather crunchy and crusty from the later RVQ levels being inaccurate enough.
+ I'm not sure which path to go with it for further experimentation:
+ Utilizing the original model for embeddings or last hidden state as the input embeddings for the prompt/response.
+ I don't think this is the way to go. It seems negligible for additional complexity.
+ Training a dedicated NAR model in hopes to bolster the later RVQ levels' performance, as the issues come from the later RVQ levels.
+ Utilizing an interleaved pattern instead to make better use of attending to past tokens for all levels.