text
stringlengths 0
2.74k
|
|---|
; perimeters = 2 |
; physical_printer_settings_id = |
; post_process = |
; print_settings_id = 0.15mm_3mm Brim - No Skirt - Slow Start |
; printer_model = MK3S |
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n |
; printer_settings_id = Original Prusa i3 MK3S & MK3S+ |
; printer_technology = FFF |
; printer_variant = 0.4 |
; printer_vendor = |
; raft_contact_distance = 0.1 |
; raft_expansion = 1.5 |
; raft_first_layer_density = 90% |
; raft_first_layer_expansion = 3 |
; raft_layers = 0 |
; remaining_times = 1 |
; resolution = 0 |
; retract_before_travel = 1 |
; retract_before_wipe = 0% |
; retract_layer_change = 1 |
; retract_length = 0.8 |
; retract_length_toolchange = 4 |
; retract_lift = 0.6 |
; retract_lift_above = 0 |
; retract_lift_below = 209 |
; retract_restart_extra = 0 |
; retract_restart_extra_toolchange = 0 |
; retract_speed = 35 |
; seam_position = nearest |
; silent_mode = 1 |
; single_extruder_multi_material = 0 |
; single_extruder_multi_material_priming = 0 |
; skirt_distance = 2 |
; skirt_height = 3 |
; skirts = 0 |
; slice_closing_radius = 0.049 |
; slicing_mode = regular |
; slowdown_below_layer_time = 20 |
; small_perimeter_speed = 25 |
; solid_infill_below_area = 0 |
; solid_infill_every_layers = 0 |
; solid_infill_extruder = 1 |
; solid_infill_extrusion_width = 0.45 |
; solid_infill_speed = 80 |
; spiral_vase = 0 |
; standby_temperature_delta = -5 |
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{else}M900 K30{endif} ; Filament gcode LA 1.0" |
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} |
; support_material = 1 |
; support_material_angle = 0 |
; support_material_auto = 0 |
; support_material_bottom_contact_distance = 0 |
; support_material_bottom_interface_layers = -1 |
; support_material_buildplate_only = 0 |
; support_material_closing_radius = 2 |
; support_material_contact_distance = 0.1 |
; support_material_enforce_layers = 0 |
; support_material_extruder = 0 |
; support_material_extrusion_width = 0.35 |
; support_material_interface_contact_loops = 0 |
; support_material_interface_extruder = 0 |
; support_material_interface_layers = 2 |
; support_material_interface_pattern = rectilinear |
; support_material_interface_spacing = 0.2 |
; support_material_interface_speed = 100% |
; support_material_pattern = rectilinear |
; support_material_spacing = 2 |
; support_material_speed = 50 |
; support_material_style = grid |
; support_material_synchronize_layers = 0 |
; support_material_threshold = 55 |
; support_material_with_sheath = 0 |
; support_material_xy_spacing = 50% |
; temperature = 210 |
; template_custom_gcode = |
; thick_bridges = 1 |
; thin_walls = 0 |
; threads = 16 |
; thumbnails = |
; toolchange_gcode = |
; top_fill_pattern = rectilinear |
; top_infill_extrusion_width = 0.4 |
; top_solid_infill_speed = 40 |
; top_solid_layers = 7 |
; top_solid_min_thickness = 0.6 |
; travel_speed = 180 |
; travel_speed_z = 0 |
; use_firmware_retraction = 0 |
; use_relative_e_distances = 1 |
; use_volumetric_e = 0 |
; variable_layer_height = 1 |
; wipe = 1 |
; wipe_into_infill = 0 |
; wipe_into_objects = 0 |
; wipe_tower = 1 |
; wipe_tower_bridging = 10 |
; wipe_tower_brim_width = 2 |
; wipe_tower_no_sparse_layers = 0 |
; wipe_tower_rotation_angle = 0 |
; wipe_tower_width = 60 |