Datasets:

nopperl

/

arxiv-image-text

like 2

b9330fdc0e74404abbe2650352e78533

(Color online)(a) Time evolution of Rabi frequencies for converting a W to a GHZ state, compared to the pulse sequences of the LR scheme of Ref. <cit.>. (b) Total squared pulse areas A for different pulse sequences: T_LR is the time required for the desired W-to-GHZ state conversion in the LR scheme, while T_min is the corresponding time in the case of time-independent Rabi frequencies (τ=0).

2012.15169

WtoGHZstate_Fig2.jpg

5f9d9dfc20ab496da498cc6f3b38ea75

(Color online) Time evolution of the GHZ-state fidelity F_GHZ=|⟨GHZ|ψ(t)⟩|^2 for the pulse sequences displayed in Fig. <ref>.

2012.15169

WtoGHZstate_Fig3.jpg

4b2da99594d549d0aedce0abb5ecea47

A schematic behavior of the dispersions in Eq. (<ref>) (p=| p|). Solid red, dashed blue, and dotted purple curves correspond to p_0=E_ p^+ (q.p.), p_0=E_ p^- (q.h.), and p_0=E_ p^ a (a.p.), respectively. The gray horizontal line indicates p_0=0 corresponding to the Fermi level.

2012.15173

Dispersions.jpg

db7e2e8ba9a847b982ebd74d39a04ce9

Processes relevant for the freeze-in mechanism of the DM.

2012.15174

Feynmanpicture.jpg

df21d63d7a14405699a96a7afeac6e01

Sensitivities of GW detectors on GWs from the first-order PT and the DWs decay.

2012.15174

GWDW_3points_1230.jpg

9afd8e5c5477484fbca6746f5427ab90

The solid line is calculated by Eq. <ref> for Ω h^2=0.12. The stars correspond to the benchmark points in Table <ref>.

2012.15174

Tn.jpg

6ef6f204d433438ebd09b5f36e2ce902

Implementation of scale and weight adaptive heatmap aggregation on HrHRNet.

2012.15175

hrhrnet.jpg

041149f53a3a44fe9b9dce6412113f82

Top row: the noses of different persons are covered by gaussian kernels with the same standard deviation. Bottom row: the standard deviations for keypoints of different persons are adaptively adjusted in SAHR.

2012.15175

nose_heatmap.jpg

106d29a3faa34a218acc438a82960956

Visualization of 1/𝐬. Redder pixels indicate larger values smaller scale factors. Within each image, the order of person scales (A B C) is usually the same as the order of scale factors (A B C).

2012.15175

scale_map.jpg

bedf82a78e8e44598ec98149e4965c30

L2 loss cannot appropriately measure the difference between two distributions. Even if the loss is reduced a lot, the center points of these two distributions may keep unchanged. Thus original heatmap regression has to fix the standard deviation for all keypoints, and our scale-adaptive heatmap regression needs to add regularizer loss for scale map.

2012.15175

sigma.jpg

991e307e072a41c4b2754afa42c3b716

a) The FRep field of the functionally defined 'bat' object and b) The SDF field computed for the functionally defined 'bat' object. The colours in the pictures correspond to the point membership rule: blue colour corresponds to the negative values of the defining function, black colour corresponds to the boundary of the object and yellow colour corresponds to the positive values of the defining function.

2012.15176

fig1.jpg

423a7c6112344a1892c96ad1c3e4245b

The illustration of the HFRep function continuity through throught varying the slope controlling parameter s_l. a) Plots of hyperbolic tangent sigmoid functions with according slope values s_l. Red line: S_sig(x), s_l=10^-4. Blue line: S_sig(x), s_l=10^-5; b) the HFRep 'star' object that was computed with s_l = 0.00001 for F_sig, equation (<ref>); c) the HFRep 'star' object that was computed with s_l = 0.1 for the F_sig, equation (<ref>); all sharp features are smooth, i.e. the HFRep function is C^1 continuous.

2012.15176

fig10.jpg

92f4e2a1fd3945229c5c2a05d4c2fd74

The illustration of the HFRep heterogeneous object based on the FRep and SDF representations with incorporated microstructure. a) the rendered HFRep 'sphere' object using the sphere-tracing method (left) and its isolines (right); b) the rendered HFRep 'heart' object using sphere-tracing method (left) and its isolines (right);

2012.15176

fig12.jpg

0518dba401034dc4b14700ae31c92534

The illustration of the metamorphosis between two HFRep textured objects using the STB and STTI techniques. The texturing was made using procedural noise functions.

2012.15176

fig13.jpg

2921eb4386634c43be7c90e181b81188

The HFRep 'H' object that is textured using procedural function <ref> modelling the 'wood' texture. This function was differently parameterised (a), (b), (c) by computed IDF for the given object.

2012.15176

fig13_2.jpg

bfc5aa7289a94d70a12acb68e1dd5cc8

The COVID-19 cell model obtained as a combination of the HFRep and SDF functions. a) exterior of the virus cell; b) interior of the virus cell.

2012.15176

fig14.jpg

8d693bee7e15420a8d0ca1a4a85fb7e4

Metamorphosis between multiple coloured objects using the STB and STTI techniques. Colours of the initial objects are procedurally defined per voxel.

2012.15176

fig15.jpg

2400fd4251384c25921a6bf287798038

The IDF field computed for the 'Stanford Bunny' 3D mesh using the method described in <cit.> and an SDF slice to show the difference in nature of these fields. a) the IDF field computed on the boundary of the mesh. Black isolines show how the field is changing according to the shape of the object; b) the interior slice of the mesh with computed IDFs. The yellow point p_s in the slice corresponds to the 'source' point. c) the SDF slice of the same model with computed interior and exterior distances. Colour changing reflects how the distances are changing from interior to exterior of the object.

2012.15176

fig2.jpg

4d631a9b862244fbaf4154cf86301942

The STB-based metamorphosis operation over the initially FRep 'heart' converted to HFRep and initially BRep 'cube' converted to SDF 'cube'.

2012.15176

fig3.jpg

b7e456228c0c4876ad28fa1b2332529f

The illustration of HFRep based on FRep and ADF with applied PHT-spline (a polynomial spline over hierarchical T-mesh) interpolation to restore the distance field at each cell. ADFs are generated using a numerical solution of the eikonal equation on the quadtree. a) the FRep field; b) a hierarchical quadtree subdivision; c) UDF computed on the quadtree with the applied PHT-spline interpolation for restoring distances at each quadtree cell; d) the HFRep field that was obtained using the generated ADF.

2012.15176

fig4.jpg

a2999652d001427fb78c5060877dfd2a

(a) 'Star' object and its FRep field; (b) the HFRep 'star' object generated on the basis of the FRep object. The boundary of the FRep object (a) was extracted and then used for computing boundary distances. The obtained distances were interpolated in interior of the HFRep 'star' object using barycentric interpolation and mean-value coordinates. The isolines and colour show how the field changes from the source point (white circle) towards the object boundary.

2012.15176

fig5.jpg

57d8b503ec21434b9e9b47812e762d87

Two cases when extrapolation is important to enforce the continuity of the field: a) when we have DF (light pink and light orange colours) for two objects that are distantly placed in space. In this case we need to extrapolate the distance values into the points of the green grid; b) when we computed the IDF and it is essential to obtain distances in exterior of the object.

2012.15176

fig7.jpg

38cf4da063974cf7a4be8615c38f6774

The comparison of the field restoration at each subdivided hierarchical cell using bilinear interpolation (a) and PHT-spline interpolation (b). In red circles we can see the C^0 discontinuity in the field isolines where the cells of different size appear next to each other.

2012.15176

fig8.jpg

dc18a453f78049d6a547b1ef6d11a42f

HFRep based on hybridisation of FRep and IDF generated for FRep 'heart' object using the method from <cit.>. a) the diffusion map computed on the surface of the object that is used for restoring distances at the shape boundary; b) the distances obtained at the boundary of the object shape that are shown as black isolines; c) is the tetrahedral slice of the mesh with isolines corresponding to the interior distances. The yellow point p_s corresponds to the 'source' point defined in the object interior.

2012.15176

fig9.jpg

5c2292809f98468f96ec0b143bebf2e4

Phase shifts between the five temperature maps obtained from the SONG data for set01–set05. The constant movement of the spots has been removed from the measurements, by removing the shift at the lowest latitude (ψ_*=60.25^∘) that always has spots. The plot gives the average phase shifts in degrees per day plotted against sin^2(ψ)-sin^2(ψ_*). The error bars indicate the standard deviation. The weighted fit of the function f(ψ)=β(sin^ 2(ψ)-sin^2(ψ_*)) to the measurements is shown as a straight line.

2012.15177

cc_sigmaGem_SONG_set1_5.jpg

461598a23ad6468fae5fe7a3343f3df4

Dynamic Hα residual spectra of σ Gem with the average line profile subtracted. The yellow denotes areas of increased emission and the blue areas of enhanced absorption in comparison to the average level. Crosses on the left show the phases of individual spectra. The dotted lines mark the blue shifted line wing, line core, and the redshifted line wing of the Hα line profile.

2012.15177

sigmaGem_Ha_noH2O_phim_gamma.jpg

a10355769d894ed690c07f11e572516a

Comparison of the photospheric and chromospheric activity. Dotted lines show the minimum temperature and the solid lines the residual Hα emission plotted against the phase.

2012.15177

sigmaGem_Ha_spots_new_set07.jpg

e38e79b204aa4deab78071cd87ea326c

Doppler images of σ Gem obtained for the seven data subsets. The x-axis is rotational phase, and the y-axis is spot latitude. The tick marks above each map denote the phases of the spectroscopic observations. The colour gives the temperature in Kelvin, as indicated by the colour scale on the bottom row. All the maps are plotted on the same temperature scale.

2012.15177

sigmaGem_SONG_maps_new_set07_0.jpg

65a17c4d5a064f2eb802571eb47bb131

Doppler images of σ Gem obtained from set07 divided into two subsets at MJD=57464 and using all the data together (set07 in our analysis). The data for subset1 were obtained at MJD=57448–57464 and for the subset2 at MJD=57464–57479. The x-axis is rotational phase, and the y-axis is spot latitude. The tick marks above each map denote the phases of the spectroscopic observations. The colour gives the temperature in Kelvin, as indicated by the colour scale next to the map. All the maps are plotted on the same temperature scale.

2012.15177

sigmaGem_SONG_sets7_submaps.jpg

46b041947d164b4280961300108355f5

Minimum (dotted line), mean (solid line) and maximum (dashed line) temperature of the Doppler images plotted at each latitude. The vertical dotted line gives the temperature limit below which the area is considered to be a cool spot.

2012.15177

sigmaGem_latT.jpg

c95ced04280d427183252e011165adaf

Minimum (dotted line), mean (solid line) and maximum (dashed line) temperature of the Doppler images plotted at each phase. The horizontal dotted line gives the temperature limit below which the area is considered to be a cool spot.

2012.15177

sigmaGem_lonT.jpg

e207e047699c48be937b2907b0b91b4b

Comparison of the observed brightness (a) with the brightness computed from the Doppler images (b). In both cases the observations before the phase jump, which occurred around MJD=57446, are denoted with plus-signs. The observations after the phase jump are marked with squares. In a) the dotted line is the harmonic fit to the observations before the phase jump and the dashed line the harmonic fit to the observations after the phase jump.

2012.15177

sigmaGem_photom_jump.jpg

901fe960dd344174891906997511e09b

Normalised V-band magnitudes calculated from the temperature maps (line) compared to contemporaneous observations. The error bars in the observed photometry reflect the typical error of the observations, not the error bars of individual data points.

2012.15177

sigmaGem_photom_sets_new_set07.jpg

63cf55b2177640a29da09096c19f5778

Photometric observations of acquired with the Tennessee State University T3 0.4 m Automated Photometric Telescope between October 2015 and May 2016.

2012.15177

t3plot4_v2.jpg

35a6e158ef6246888fdb23392ddf6c28

The three levels of reality described in the CA interpretation. Notice how both 𝒬𝒮 and 𝒞𝒮 are superpositions of states from the level above, only in the OS level there is no superposition.

2012.15187

3stati.jpg

96e8fd7206d44ca08dfc6474fd66c24f

a) A three-state cogwheel model and b) its energy levels with respective eigenstates.

2012.15187

cog.jpg

8b79f2c0def14c6e882d1cb5cedc4e0c

Energy levels and respective eigenstates of the three Ising spins system |s_1 s_2 s_3⟩ with permutation operator P̂_12P̂_23.

2012.15187

energylevels.jpg

4d9eb3959dbb40f28277674e72493de9

a) One state system. b) Cogwheel model. c) System with information loss.

2012.15187

sistemi.jpg

5866281f3ec8454ca853e6aa4ad5d254

Experimental setup. a, Scheme of the experimental setup. The particle is trapped in an optical tweezer (laser frequency: ω_0), and oscillates in an utra-high vacuum (UHV), along the z direction, at a frequency of Ω_z/2π = 104 kHz. The backscattered light is collected by the tweezer objective lens (f_1), separated from the tweezer light by the combination of a faraday rotator (FR) and polarizing beam-splitter (PBS) and spatially filtered by focusing (f_3) onto a single mode fiber (SMF) in a confocal arrangement. It is then split into two paths: an in-loop homodyne detection and an out-of-loop heterodyne detection. The homodyne detection is used for the efficient position measurement (ζ(t)), and is directed to the Red-Pitaya (RP) board, where the LQG is implemented in real time. Both the state estimate (ẑ(t)) the and control signal (u(t)) can be recorded. The control signal is applied to the electrode in the vacuum chamber. The heterodyne detection (local oscillator at a frequency of omega_0 ±Ω_het) employs only 5% of the light and performs an out-of-loop measurement of the particle's energy via Raman scattering thermometry by measurement of the ratio of the Stokes and anti-Stokes scattering rates (Γ_S, Γ_aS). b, Contributions to the measured position power spectral density by the measurement imprecision (imp), the measurement backaction (ba), and the mechanical quantum fluctuations (zpf) in the homodyne detection, at a control gain of g_fb/2π = 2 kHz and occupation ⟨ n⟩ = 8.3± 0.09. The dashed line indicates the frequency (∼Ω_z + 2π·22 kHz) at which imprecision and backaction contribute equally to the total added noise. Here the measured noise is only a fator 1.76 above the SQL (red line).

2012.15188

Fig1.jpg

47dfac1a59fa4a10b1cdc0892250ebe3

Kalman filter and verification. a, Time trace of the measurement (gray) and estimation (blue) sequences at g_fb/2π = 16 kHz, n = 1.68± 0.09. At around t=100 s, a (rare, ∼ 10p_zpf) disturbance to the particle is highlighted by the filter. b, Power spectral density of the innovation sequence. Horizonntal lines indicate the white noise model (solid) and the 95% confidence region of the expected χ^2 distribution (dashed) <cit.>. The low frequency phase noise (< 25 kHz) and the narrow noise peaks due to residual x – and y – modes coupling (> 225 kHz) are not considered in our noise model. c, Experimental probability density function (PDF) and cumulative density function (CDF) of a 10 ms innovation sequence. A 4th order f_c = 10 kHz highpass filter is used to reduce the low frequency contributions that are not considered in our model. The black lines are Gaussian fits to the data.

2012.15188

Fig2.jpg

e13ca7d2838e4d2caddf491aa0ab8519

Quantum optimal control. a, Heterodyne power spectral density at g_fb/2π = 8 kHz (large narrow peaks) and g_fb/2π = 110 kHz (small broad peaks), where we distinguish the spectral contributions from Stokes (red) and anti-Stokes (blue) scattering. The asymmetry of the peaks is a signature of the quantization of the energy levels of the harmonic oscillator. b, Statistical fluctuations of Stokes (red) and anti-Stokes (blue) scattering rates at g_fb/2π = 10 kHz and g_fb/2π = 200 kHz. Each point is evaluated by integrating a single PSD as shown in a, and normalizing by the average value of their difference over all of the measurements (⟨ΔΓ⟩ = ⟨Γ_S-Γ_aS⟩). c, Phase space plot of the quantum trajectory of the particle at g_fb/2π = 8 kHz (green), g_fb/2π = 110 kHz (purple) and the corresponding solutions of the LQG closed-loop system (red dashed). Highlighted is the uncertainty given by the steady-state conditional covariance matrix Σ̂^ss as given by the Kalman filter. For comparison, we show the phase space volume occupied by the zero-point fluctuations in dark blue. Here the data is filtered with a high-order bandpass ([range-units=single]25225), attenuating the contributions of the noise sources at high and low frequencies that are not considered by the model. d, Occupation at different feedback gains as estimated by the Kalman filter (green dots) and independently measured by heterodyne asymmetry (yellow circles). The magenta crosses show the four points at which 60 repeated measurements were performed for reduction of statistical fluctuations as in b. Error bars represent the standard deviation of the measured value. The solid line is the analytic closed-loop solution of the LQG, showing the expected occupancy given by our experimental parameters and their uncertainties. The gray area shows the cooling limit set by the efficiency of our measurement.

2012.15188

Fig3.jpg

048f7e3835ab489eb7520b86241f1051

The experimental setup.

2012.15188

FigSI1.jpg

0c0d405df0cb4c7ebd9586e073d3563d

Force calibration. To map the applied voltage [V] to a force [N], we drive the particle with a series of sinusoidal signals of different amplitude and frequency and measure the particles response in the calibrated position PSD.

2012.15188

FigSI10.jpg

264faef94c194000906f83998b59a6a4

Heating rate. The backaction and thermal contribution to the force noise are directly measured by performing re-heating measurements. We restrict the measurement to short (150 ms) re-heating periods. Longer ring up measurements may lead to the loss of the particle when mainly coupled to the high temperature photon bath. a At each pressure we release the feedback and observe the heating dynamics of the particle 1000 times. The ensemble average of the variance of these traces represents the average energy increase rate. b Pressure dependence of the heating rate. At pressures below 1× 10^-8 mbar the contribution to the total force noise is dominated by the photon recoil, or measurement backaction. Horizontal error bars are given by the 50% accuracy specified by the pressure gauge producer.

2012.15188

FigSI11.jpg

a2a41be00bb3480a8fd56a8b46325ba7

Noise components in the heterodyne spectra. a Linear dependence of the shot-noise power as a function of optical power in the heterodyne local oscillator. The red point shows our operating condition, almost a factor 10 above dark noise. b Phase noise of the heterodyne signal generators, directly measured after a mixer, and renormalized to the optical carrier amplitude. The lighte background shows comparison with the raw optical signal. Even though at the relevant frequencies this is almost a factor 100 smaller than the measured signal, its contribution is fundamental (green area in c and d) given low scattering rates in the ground state. c and d Detail of all of the noises contributing to the heterodyne spectrum.

2012.15188

FigSI12.jpg

da5b44f54d9a4724a0da6ec5e4919767

Side-band asymmetry fit. a and b, Heterodyne spectra after noise subtraction, application of the inverse detector transfer function f^-1_det(ω) (whitening). The fit (black line) is a 4 parameter fit of a double lorentian plus a 1/f symmetric noise (shown also separately as purple line and gray area). The Gaussian distribution of the residuals shows good agreement of the measured spectra to the noise model. c, Power of the red and blue sideband normalized by their average difference, as a function of the LQG feedback gain for both positive and negative heterodyne frequencies (2 points per colour per gain). The constant difference in the power of the 2 side-bands represents a sanity check of the noise analysis.

2012.15188

FigSI13.jpg

a1f03caacbb64dc5a64be52eac488991

Scattering angle. We define the scattering angle θ as the angle between the z axis and the scattering direction.

2012.15188

FigSI2.jpg

53916a743fe14f4e850f0087530b43ed

The standard quantum limit. a, Contribution to the measured power spectral density of imprecision (imp), backaction (ba), and zero point fluctuation (zpf), compared to the SQL as a function of frequency, in a regime of weak cooling (Γ_fb=Γ_ba/5). b, Contribution to the total noise, evaluated at Ω_z ±Δ (verical dotted line in a), as a function of the scattered power (measurement strength). In the case of weak cooling, the contributions of backaction and zero point fluctuation are concentrated on resonance, allowing perfect balancing of imprecision and backaction when Δ≈ 2π× 22 kHz, and resulting in a total added noise that is only a factor 1.76 from the SQL. c, Contributions to the measured power spectral density in a regime of strong cooling (Γ_fb=2Γ_ba). In this case, the contributions of backaction and the zero point fluctuations are broadened in frequency, allowing on resonance (vertical dotted line), a suppression of the added noise to a factor of 2.7 from SQL (in d as a function of the scattered power). Note that in the case of optical tweezers, b and d do not represent a complete set of experimentally available conditions, and are only valid at a fixed scattered power (vertical dotted lines). A variation of this would necessarily come along with a change in the mechanical frequency, and a redefinition of the system parameters. This representation is however useful to understand the operating conditions of the system with respect to the SQL.

2012.15188

FigSI3.jpg

381d8298c57342ac8364b3e1164c4b6b

The measured noise. Measured displacement power spectral density (black) showing the contributions by imprecision (imp, gray), backaction (ba, green), and the zero point fluctuations (zpf, blue), compared to the SQL (red). a A feedback gain of g_fb/2π = 2 kHz results in an occupation of n = 8.3± 0.09. The almost perfect balancing of imprecision and backaction at 22 kHz above resonance (vertical dashed line) results in a measurement that is only a factor 1.76 from the ideal SQL. b In the case of strong cooling (g_fb/2π = 110 kHz), and occupation of n = 0.71± 0.09, we achieve a total added noise on resonance that is a factor 2.7 higher than the SQL.

2012.15188

FigSI4.jpg

26a36977be934a2faf6f36c8eed07e5d

Fiber-dipole mode overlap. a, Numerical calculation of the dipole mode (orange) at a fixed angle imaged at the fiber interface by our confocal microscope system, fiber mode (blue), and their overlap (green) as a function of the distance to the center of the fiber. The gray shaded area represents the fiber core. b, Overlap efficiency as a function of magnification of the optical system. The gray vertical line shows our operating point, not far from the optimal value. c, Information collection efficiency by the microscope objective (orange dots), maximum fiber mode matching (blue dots) and the product of the two (green dots) as a function of the objective NA. The gray line is our operating point.

2012.15188

FigSI5.jpg

52daac56d61445a3b3efe5e95974ae31

Derivative feedback performance. a, Noise squashing in the closed-loop measurement PSD resulting from leakage of measurement noise inthe colsed-loop system. b Occupation measured in heterodyne detection as a function of the feedback gain of a derivative feedback. The different colours cossepond to the PSDs in a. A qualitative approximation of this behaviour can be obtained by tuning the Kalman gains (defined in Section <ref>) of our controller to a value that is a factor 10^5 larger than the optimal one, and reducing the controller transfer function to be white over a large frequency band. In this setting the filter ignores the model and bases its feedback solely on the measurement. It is important to notice that the ideal derivative filter would reach occupations as low as those determined by the measurement uncertainty as defined in (<ref>). However this is not a practical solution, as it would require an infinite bandwidth controller.

2012.15188

FigSI6.jpg

35e92205f6d64c0d8d1c004e89cd3588

LQG performance. a, Comparison of the analytic solution of the occupation for optimal (LQG) and non-optimal (velocity, derivative) control and estimation methods. Despite the use of an optimal state estimator the closed-loop solution of the velocity feedback (red) is diverging for high feedback gains, contrary to the LQG (blue). This shows the importance of using the complete state vector in the feedback in order to minimize the energy of the system. Derivative filters are commonly employed as estimators for velocity feedback methods (green). When exceeding the optimal feedback gain undesired noise is fed back into the system, leading to a diverging closed-loop solution and noise squashing. b - c, Power spectral densities of the measurement (gray), Kalman estimation (blue), innovation (red) and the analytic solution of the mathematical description (black line) at g_fb/2π = 16 and g_fb/2π = 180. The black lines in the innovation plot indicate the white noise model (solid) and the 95% confidence region of the expected χ^2 distribution (dashed) <cit.>.

2012.15188

FigSI7.jpg

53499459ba3b419b88995ed7eb02904d

Colored noise model. a Comparison of the power spectral densities of the Brownian noise model (green) and the low-pass noise model (blue) the power spectral densities of the innovation (gray). b - c, Power spectral densities of the measurement (gray), Kalman estimation (blue), innovation (red) and the analytic solution of the mathematical description (black line) at g_fb/2π = 40 and g_fb/2π = 150. The extension with an appropriate noise model brings along more accurate estimates of the state. The black lines in the innovation plot indicate the colored noise model (solid) and the 95% confidence region of the expected χ^2 distribution (dashed) <cit.>.

2012.15188

FigSI8.jpg

351cb825f4ce4f59a8651e88758dd5a0

Position calibration. a Measurement of the displacement power spectral densities at different feedback gains and labelled by the occupation measured independently by Raman thermometry. b Integrated voltage variance from the homodyne measurement plotted as a function of position variance extimated from the heterodyne measurement. Red crosses and blue dots represent the position variance estimated by the Stokes and anti-Stokes sidebands respectively. A linear fit provides the calibration factor for the homodyne measurement.

2012.15188

FigSI9.jpg

6074c6f28eb14b5ca5e9cc6bf27a2311

A sketch of the striped jet model. The central engine generates stripes of toroidal-dominating magnetic fields with reversing polarity. The jet bulk acceleration is powered by magnetic reconnection between stripes. As the jet expands along its propagation, the stripes are stretched sideways, making them vulnerable to tearing instabilities, which trigger strong magnetic reconnection. This is the location of the blazar zone and contributes the most to the spectral luminosity peak of the large-scale emission. The blazar zone has a bulk Lorentz factor of Γ∼ 10 and magnetization factor of σ>1. The jet bulk acceleration is relatively fast when its magnetization is above 1. The jet magnetization drops below 1 at ∼ 10 pc, and the bulk acceleration slows down. At ∼ 100 pc, the jet becomes kinetic-energy-dominated, and the bulk acceleration stops.

2012.15189

StripedJetModel2.jpg

f4d3be8026d44d978743adef83994457

The jet intrinsic acceleration rate Γ̇/Γ at ten to one hundred parsecs from the central engine. The left panels show the dependence on the minimal stripe width l_ min, while the right panels are for different stripe profile index a.

2012.15189

acceleration.jpg

6cf771d958e64582b9c7842581907685

A sample of the blazar SED under the striped jet model. The blue solid line represents emission from the flaring region, while the orange dashed line represents the quasi-stationary large-scale jet emission.

2012.15189

blazarsed.jpg

d97ae9488bd541dc97e4b1691ee2bd6b

The core-shift distance from the central engine at various observational frequencies. The four panels show the effects of four key parameters of the striped jet model, namely, the minimal stripe width l_ min (upper left), the stripe profile index a (upper right), the total jet power L_ j (lower left), and the particle spectral index p (lower right). The blue solid curve represents the default model parameters, while orange dashed and green dotted curves correspond to two variants of the parameters.

2012.15189

coreshift.jpg

e330310818dd4a0db8dfe036f44358ca

The jet bulk Lorentz factor Γ (top panels), magnetization factor σ (middle panels), and dissipation power P_ diss (bottom panel) along the jet propagation direction. The left panels show the dependence on the minimal stripe width l_ min, while the right panels are for different stripe profile index a.

2012.15189

jetevolution.jpg

ced9aeda11804874b54cf14a94bae91e

The local comoving magnetic field strength B' between 0.1 and 10 pc from the central engine for various stripe profile index a (left panels) and total jet power L_ j (right panels).

2012.15189

magneticfield.jpg

e889f20ffad24cc5a3fa78262b8b2e85

The synchrotron spectrum L_ν for the large-scale striped jet blazar emission. The emission spectrum is fairly flat, i.e., L_ν∼ν^0, over a wide range of frequencies. Panels and curves are consistent with Figure <ref>.

2012.15189

radiospec.jpg

ea2e0088669f487590bc0cd11d2df5bb

The synchrotron spectrum L_ν integrated to different jet distances from the central engine. The four panels are the default parameters (upper left), a smaller minimal striped width l_ min=10^15 cm (upper right), a smaller stripe profile index a=1.1 (lower left), and a smaller electron spectral index p=3.0 (lower right). For the last three panels, except for the said changes, all other parameters are the same with the default case.

2012.15189

radiospecvsz.jpg

1a4824ef7c79460f960254c35e736c5c

Histogram showing distribution of E_min for 30 runs of Case I using proposed method

2012.15195

histfit_case1_GA.jpg

a9094c452ebb443f891bf75409709609

Histogram showing distribution of E_min for 30 runs of Case I using stochastic hill climber

2012.15195

histfit_case1_HC.jpg

3e182b411cb74ef8afe860656f61f1e1

Histogram showing distribution of E_min for 30 runs of Case II using proposed method

2012.15195

histfit_case2_GA.jpg

65163e83fa3340cea5a89b642fb0e81f

Histogram showing distribution of E_min for 30 runs of Case II using stochastic hill climber

2012.15195

histfit_case2_HC.jpg

9eed87dc958c4e93bd29cb285b0c3645

Optimal Speed Profile for Case I

2012.15195

speedprofile_case1.jpg

1669792789d04f8e8ff6a9db4a138e06

Optimal Speed Profile for Case II

2012.15195

speedprofile_case2GA.jpg

d7483ac0674841588d5f3287e1b03837

Overview of Crossover-SGD

2012.15198

Overview.jpg

72aa01b08bb74896889294c0772c1bf4

Overview of DNN model segment

2012.15198

Segment.jpg

8206ff6364844a4287d0d5f1ca77c35c

Impact of learning rate when the mini-batch size is increased

2012.15198

eval1.jpg

5d465be30ecf435dbe5474b7a6d2691d

Validation accuracy with increasing of mini-batch size for the large mini-batch problem

2012.15198

eval2.jpg

e9db112b64c9401db621df96ea2debb2

Validation accuracy with increasing number of worker processes and fixed mini-batch size (i.e., 86,016)

2012.15198

eval3.jpg

149c14396ae54af49c4e4caa9d44d8d1

Time efficiency comparison about training time ( dataset : Cifar10 <cit.>, model : ResNet-50)

2012.15198

eval4.jpg

fcbaffb27e05462fa769f09de27b8205

Overview of previous gossip-based methods

2012.15198

gossip.jpg

24df4b4086a54634b64cb0fbd75cebfd

Hierarchical Crossover-SGD for node scalability about preserving high validation accuracy

2012.15198

group.jpg

a81298203df7461a8c41f91b64ebc52d

Oveview of segment-wise communication of Crossover-SGD

2012.15198

sendrecv.jpg

94d64f7f64434e93af50cd19191ba9aa

Principle schemes of TF-QKD. a) In ideal TF-QKD, Alice and Bob encode quantum states (QS) on local lasers, attenuated to the single-photon level and with equal frequencies ν_A=ν_B. The resulting signals are sent to Charlie, where they interfere on single-photon detectors (D0 and D1). b) In practical implementations, a reference laser with frequency ν_R is sent to Alice and Bob through a service fiber, to phase-lock the QKD lasers and ensure ν_A=ν_B=ν_R. After information encoding, QKD lasers are sent to Charlie through the QKD fibers, whose optical-length-changes are detected by interleaving the key streaming with classical transmission. Optical length fluctuations are counteracted by adjusting the phase of the lasers through an actuator (act.). c) In our approach, an additional sensing laser, with frequency ν_S travels the service fiber with the reference laser, and the QKD fibers together with the QKD lasers. It can be spectrally separated because ν_S falls in a different channel of the wavelength-division-multiplexing grid. While QKD lasers interfere on D0 and D1, the classical signals at ν_S are phase-compared on a photodiode (PD) to detect the noise of both the service and QKD fibers. This allows tight control of the fiber noise and simultaneous key streaming.

2012.15199

setup_genT.jpg

d413108220f74dacbc9ee0c7f090b8f5

Map and experimental set-up. a) Charlie was located at INRIM (Torino), while Alice and Bob were located in shelters of the telecom network in Bardonecchia and Santhià (Imagery 2020 Landsat/Copernicus, Imagery 2020 TerraMetrics, Map data ©2020). b) A sketch of the Italian Quantum Backbone, with the spans used in this experiment coloured in red and the red-filled (empty) circles representing Charlie (Alice and Bob). c) The experimental layout. The reference laser in Charlie is stabilized to a high-finesse cavity and the sensing laser is phase-locked to it using an optical comb. Wavelength division multiplexers combine/separate them and add/drop bidirectional data signals. In Alice and Bob, we detect the beat between the incoming reference laser and a local laser and phase-lock the two. The QKD laser light is recombined with the sensing laser and sent to Charlie on a dedicated fiber. The acousto-optic modulator AOMa adjusts the optical phase to correct for the noise introduced by the fiber optical length variations, while AOMs is a fixed frequency shifter. The fiber noise is detected by interfering the local sensing laser with return light from each arm. The two beatnotes are detected on separate photodiodes and phase-compared in the RF domain. The QKD lasers interfere on a photodiode when performing experiments in the classical regime, and on a single photon detector (SPD) in the photon-counting regime, also used to detect background photons.

2012.15199

setup_mapT.jpg

c616949eceed42e88096869496c4ce5e

Phase fluctuations over time. The deviation of the phase σ_φ between the two QKD lasers interfering in Charlie at different timescales, in an unstabilized (blue) and stabilized (red) condition. For this calculation, we acquired the interference pattern over 4s and subdivided it in shorter time frames, calculating σ_φ for each frame. The shadowed areas indicate upper thresholds for relevant values of the QBER, quantified as σ^2_φ/4 in the low-noise (φ≈ 0) approximation. The arrows indicate timescales where the QKD lasers noise and the uncompensated fiber noise (uncorrelated fluctuations at the two wavelengths) become relevant. The phase, and corresponding QBER, were retrieved from the interference pattern according to the procedures described in the Methods.

2012.15199

sigma.jpg

bb21a427b4ed4aaf8939844f4d6f4202

QKD lasers interference on the long term. In the central panel, the normalised interference pattern in the stabilized-fiber condition is shown in a 4s-long time window. The blue shadowed area in the uppermost panel indicates a 100ms-long fraction of the time interval in which the interferometer operated in the maximum visibility condition, i.e. the one exploited for the exchange of the bits of the cryptographic key. The red shadowed area in the lowermost panel indicates a 100ms-long time interval in which the interferometer operated around the 0.5 visibility. Configurations far from the deterministic behavior of the interfermeter (i.e. far from the maximum and minimum of the visibility) are the ones where the relation between the phase fluctuations and the QBER is linear, and could be used to realign the phase on the long term and mitigate the residual uncontrolled optical path length variations.

2012.15199

vis_long.jpg

c4652b727b79485f847ec7552e728284

Starting from the left, the first 3 diagrams show the scalar portal interactions potentially leading to the correct DM relic abundance. The last diagram on the right depicts the “bulk” mechanism of WIMP annihilation via t-channel fermion exchange, which is often dominant in this work.

2012.15200

portal_dm.jpg

641896bfa54c4410b4a9fab709f23a8b

Energy Harvesting setup. Refer <cit.> for a detailed architecture.

2012.15203

Figure_new_edit.jpg

a28feff193bf4f258b57e279a4993af1

Energy Efficiency with and without CSI.

2012.15203

Node_8_with_expense_Oracle_plot_0.1_10000_1000.jpg

9380c3fefbf54c239968d2d99b319931

Energy Efficiency v/s Time Slots.

2012.15203

Original_Revised_compare_EE_weighted_nodes_oracle_benchmark_r0_0.1_10000_1001.jpg

63b1d5a157a04cae9d3f70ca019b9349

Energy Efficiency v/s Rate r_0 (in bpcu).

2012.15203

new_energy_efficiency_r_0_10000_1000_15.jpg

8f08cbf9976c4e4b8e53900e6c476207

Colour plot of the RKKY coefficient F_sum as a function of x_2/λ_F on the x-axis and x_1/λ_F on the y-axis, where λ_F=2π/k_F is the Fermi wave-length. The red (yellow) color denotes the region in which F_sum is negative (positive) and hence the ground state is FM (AFM). The green dotted line and the blue dashed line parallel to the diagonal are two lines of constant x_12, while X remains constant along the black dash-dotted line perpendicular to them.The figure exhibits oscillations between the FM and AFM ground state along the constant x_12 lines, unlike the conventional RKKY interaction obtained far away from boundaries.

2012.15205

RKKY3_x1x2_v6.jpg

2b8f577c7c89470e993c2e3cbdd3c7aa

The energy of the YSR state E_s/Δ [see Eq. (<ref>)] as a function of the distance k_F x_1 of the impurity away from the boundary for (a) α=0.55 and (b) α=0.96. The energy E_s oscillates around its bulk value. (b) If the YSR energy is close to zero energy for a magnetic impurity placed far away from the boundary, then moving it closer to the boundary can induce a quantum phase transition and change the occupancy of the YSR bound state. The coherence length is fixed to k_Fξ_sc=40.

2012.15205

shiba_bound_alt.jpg

3376b31a654243de9faa88c2031d6c14

One-dimensional nanowire with superconducting gap aligned along the x axis with two magnetic impurities with classical spins S_1 and S_2 separated by the inter-impurity distance x_12= x_2-x_1. The impurity spins are exchange coupled to the quasiparticles in the nanowire. This gives rise to YSR subgap bound states (not shown) and effective interactions between the magnetic impurities which are both affected by the boundaries of the nanowire.

2012.15205

system.jpg

5c050fa1c18545c284d136e0f0fba9ef

Geographical spread stochastic SEIQR Model fitted to Argentine data for p=0.1 and α=5. (A) Daily isolated cases compared to official data. The blue shaded area corresponds to one standard deviation of the mean. (B) Daily infected cases compared with official Data. (C) Mean Value of 100 model runs- isolated. (D) Mean Value of 100 model runs- infected.

2012.15209

FIG2b.jpg

f95b0988acb44410a9b4d5625e368630

Model prediction according to different values of α. For each curve we did 100 runs of the model. The value p is fixed to 0.1 and the mobility is the one fitted for α=5. (A)Daily discovered cases. (B)Daily actually infected cases. (C) Accumulated discovered cases. (D) Accumulated infected cases. (E) Accumulated discovered cases on 600 days. (F) Accumulated infected cases on 600 days.

2012.15209

FIG3b.jpg

b4dbf8430fdc446091583fd628fdb081

Model prediction according to different values of p. For each curve we did 100 runs of the model. The value α is fixed in 5 days and the mobility is the one fitted for p=0.1 (A)Daily discovered cases. (B)Daily actually infected cases. (C) Accumulated discovered cases. (D) Accumulated infected cases. (E) Accumulated discovered cases on 600 days. (F) Accumulated infected cases on 600 days.

2012.15209

FIG4b.jpg

09192ac0ac5547faa2af7f0667e88066

Compartment scheme of a SEIQR model. ϵ, α, σ and ω are the latency, isolation, infectiousness and immunity periods, p is the portion of infected people which is isolated and S is the survival parameter.

2012.15209

fig0.jpg

cc06d5acd8184086ad897ad433b628f8

Density map and distribution of routes used in the model. The information to create the maps was provided by the IGN. Each pixel corresponds to a 7 km x 7 km parcel

2012.15209

fig1b.jpg

5df4e1f40b954ed3aa2304b8a4ce3bf5

Geographical evolution of the pandemic. The model shows a 50 days delay between the peak near-AMBA region (Buenos Ares city and the nearest urban conglomerates, not all the metropolitan area) and the rest of the country. This fact prevent the complete suppression of the disease.

2012.15209

fig6b.jpg

1e8963955b7c4649bdbe833b4a2b2b37

Comparison between the expression (<ref>) of the characteristic function G(ϵ) = e^-ϵ Q (blue solid lines) and the numerical values (red dotted lines) computed for the fifteen-level system simulated in Fig. <ref> panel (b).

2012.15216

G15livelliN.jpg

c07c582d1ccb48b78b8c6beb8da7096b

Comparison between the spectra of the stochastic matrices L(τ) with s=300 and different values of τ, expressed in terms of the rescaled variable kτ/2s. We can observe that, for kτ/2s smaller than a critical value (numerically determined to be ≈ 0.934), all the data collapse on the same curve as predicted by Eq. (<ref>). In turn, for kτ/2s≪ 1 we observe the quadratic behavior provided by Eq. (<ref>), namely f(τ k/2s) ≈ 1-(τ k/2s)^2.

2012.15216

collapse.jpg

53a8c276479c42308086f7f05909cfeb

The redshift evolution of (<ref>) in light of the observational data <cit.>, where the numerical inputs for each model are from Table <ref>. The ΛCDM model with H(z) = H_0√(1- Ω_m+Ω_m(1+z)^3) is reflected in the solid black line.

2012.15219

acc-and-dec.jpg

e1caf3c63a60448bad567a2dd53e845d

The 68.3% and 95.4% confidence contours between parameters for the Hairless BH case and their 1D marginalized likelihood. The vertical dashed lines and black dots indicate the mean MCMC values at (Ω_m, h, Ω_β) = (0.2855 , 0.6837 , 5.5431×10^-4).

2012.15219

corner-Hairless.jpg

8cc5ad971b5d4f0ab954b0be4b2622ad

The 68.3% and 95.4% confidence contours between parameters for the Hairy BH case and their 1D marginalized likelihood. The vertical dashed lines and black dots indicate the mean MCMC values at (Ω_m, h, Ω_β, Ω_Q) = (0.2765 , 0.6849 , 5.4624× 10^-4 , 2.3937× 10^-3).

2012.15219

corner-Hairy.jpg